Solution assisted roll-coating of transparent conducting oxide thin films for organic photovoltaic applications
Source abstract
Abstract
Abstract Transparent conduction oxide (TCO) thin films are one of the key material in optoelectronic applications. These materials are usually produced by vacuum-based methods such as magnetron sputtering, both for laboratory work and for commercial purposes. Alternative methods for producing large-scale TCO films are needed. In this work, a non-vacuum coating technique for preparation of TCO thin films on large area glass substrates was presented. Tin doped indium oxide (ITO) thin films were successively coated on glass substrates by non-vacuum based roll coating method. A low electrical resistivity of ~1.3 × 10−3 Ωcm and high optical transmittance of 84% in the visible region were obtained for ITO thin film samples. Furthermore, an ITO/PEDOT PSS/P3HT:PCBM/LiF/Al structured organic photovoltaic cell was also prepared on non-vacuum roll coated ITO thin films. The device with the roll coated ITO thin film exhibits a power conversion efficiency of 1.83%, average short-circuit current density (Jsc) of 7.4 mA/cm2, open-circuit voltage (Voc) of 0.590 V, and fill factor (FF) of 0.42.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thin-Film Transistor Technologies · Organic Electronics and Photovoltaics · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Fabrication of high-brightness GaN-based light-emitting diodes viathermal nanoimprinting of ZnO-nanoparticle-dispersed resin10.1016/j.apsusc.2015.03.022 ↗
2. Transparent, flexible, and passive thermal touch panel10.1002/admt.201600204 ↗
3. Performance enhancement in organic photovoltaic solar cells using iridium (Ir) ultra-thin surface modifier (USM)10.1016/j.apsusc.2018.03.012 ↗
4. Tuning the ITO work function by capacitively coupled plasma and itsapplication in inverted organic solar cells10.1016/j.apsusc.2016.05.077 ↗
5. Transparent conductive ITO thin films through the sol-gel process using metal salts10.1016/S0040-6090(98)01748-9 ↗
6. Fabrication and vacuum annealing of transparent conductive AZO thin films prepared by DC magnetron sputtering10.1016/S0042-207X(02)00544-4 ↗
7. Comparative study of ITO and FTO thin films grown by spray pyrolysis10.1016/j.materresbull.2009.02.019 ↗
8. Roll-to-roll sputter deposition on flexible glass substrates10.1016/j.surfcoat.2013.10.056 ↗
9. Roll-to-Roll sputtered ITO/Cu/ITO multilayer electrode for flexible, transparent thin film heaters and electrochromic applications
10. Optical and electrical properties of transparent conductive ITO thin films deposited by sol-gel process10.1016/S0040-6090(00)01369-9 ↗
11. Preparation of ITO thin films by sol-gel process and their characterizations10.1016/j.synthmet.2005.07.219 ↗
12. Towards high quality ITO coatings: the impact of nitrogen admixture in HiPIMS discharges10.1016/j.surfcoat.2017.12.030 ↗
13. Sol-gel-prepared ITO films for electrochromic systems10.1016/S0040-6090(96)09060-8 ↗
14. Effect of annealing on electrical, structural, and optical properties of sol-gel ITO thin films10.1002/pssa.200881781 ↗
15. Physical properties of RF sputtered ITO thin films and annealing effect10.1088/0022-3727/39/1/027 ↗
16. Effect of temperature on the electrical properties of ITO in a TiO2/ITO film10.1002/pssa.201228325 ↗
17. Preparation of ITO transparent conductive film by sol-gel method10.1016/S1003-6326(07)60020-X ↗
18. Effects of anadditional magnetic field in ITO thin film deposition by magnetron sputtering
19. Highly conductive and transparent ITO films deposited at low temperatures by pulsed DC magnetron sputtering from ceramic and metallic rotary targets10.1016/j.surfcoat.2016.09.022 ↗
20. Effect of film thickness on the properties of indium tin oxide thin films10.1063/1.1318368 ↗
21. Band gap shift in the indium-tin-oxide films on polyethylene napthalate after thermal annealing in air10.1063/1.2357647 ↗
22. A study of stabilization of P3HT/PCBM organic solar cells by photochemical active TiOx layer10.1016/j.solmat.2010.12.030 ↗
23. Effect of P3HT:PCBM concentration in solvent on performances of organic solar cells10.1016/j.solmat.2009.01.019 ↗
24. Simple O2 plasma-processed V2O5 as an anode buffer layer for high- performance polymer solar cells10.1021/acsami.5b00091 ↗
25. Facile preparation of TiOx film as an interface material for efficient inverted polymer solar cells10.1039/C3TA13275G ↗