Ba0.5Sr0.5TiO3 thin films deposited by PLD on SiO2/Si RuO2/Si and Pt/Si electrodes
Source abstract
Abstract
Abstract Stoichiometric barium strontium titanate (Ba 0.5 Sr 0.5 TiO 3 or BST) 220-nm thick thin films were deposited by pulsed laser ablation on SiO 2 /Si, RuO 2 /Ta/SiO 2 /Si and Pt/Ti/SiO 2 /Si substrates at 400°C. The films were weakly crystalline as-deposited. Crystallization was induced by annealing the films in the range of 550–650°C. The BST films deposited on Pt/Ti/SiO 2 /c-Si substrates presented wide cracks that were promoted during the annealing process due to the thermal expansion mismatch between the BST films (α BST =4×10 −6 °C −1 ) and the Pt (α Pt =9×10 −6 °C −1 ). Smooth films showing slightly cracked areas were obtained on SiO 2 /c-Si and RuO 2 /Ta/SiO 2 /Si substrates. The ruthenium oxide thermal expansion coefficient is α RuO 2 =5.2×10 −6 °C −1 . A cross-sectional analysis at the ferroelectric/substrate interface showed that for the lower annealing temperature (550°C) a mixed amorphous/nanocrystalline microstructure is formed. For temperatures above 600°C a randomly oriented polycrystalline material is obtained. However, an amorphous layer of 4–6 nm still remains on the substrate even after heat-treatments up to 650°C. The dielectric constant of the BST films varied in the range of 30–325.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Electronic and Structural Properties of Oxides · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.