Annealing effect on dielectric and leakage current characteristics of Mn-doped Ba0.6Sr0.4TiO3 thin films as gate insulators for low voltage ZnO thin film transistor
Source abstract
Abstract
Abstract We report on the dielectric properties and leakage current characteristics of 3 mol% Mn-doped Ba 0.6 Sr 0.4 TiO 3 (BST) thin films post-annealed up to 600 °C following room temperature deposition. The suitability of 3 mol% Mn-doped BST films as gate insulators for low voltage ZnO thin film transistors (TFTs) is investigated. The dielectric constant of 3 mol% Mn-doped BST films increased from 24 at in-situ deposition up to 260 at an annealing temperature of 600 °C due to increased crystallinity and the formation of perovskite phase. The measured leakage current density of 3 mol% Mn-doped BST films remained on the order of 5 × 10 − 9 to 10 − 8 A/cm 2 without further reduction as the annealing temperature increased, thereby demonstrating significant improvement in the leakage current characteristics of in-situ grown Mn-doped BST films as compared to that (5 × 10 − 4 A/cm 2 at 5 V) of pure BST films. All room temperature processed ZnO–TFTs using a 3 mol% Mn-doped BST gate insulator exhibited a field effect mobility of 1.0 cm 2 /Vs and low voltage device performance of less than 7 V.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Thin-Film Transistor Technologies · Ga2O3 and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.