article·2002-12-01

Improved interface properties of yttrium oxide buffer layer on silicon substrate for ferroelectric random access memory applications

Donggun Lim, Dong-Joo Kwak, Junsin Yi

Publisher page

Abstract

Abstract In this paper, we report upon an investigation into the feasibility of Y 2 O 3 films as buffer layers for metal ferroelectric insulator semiconductor type capacitors. Buffer layers were prepared by a two-step process of low temperature film growth using the RF reactive magnetron sputtering method and subsequent rapid thermal annealing. By applying an yttrium metal seed layer of 4 nm, unwanted SiO 2 layer generation was successfully suppressed at the interface between the buffer layer and the Si substrate. Increasing the post-annealing temperature above 700 °C reduced the surface roughness of the Y 2 O 3 films, and increasing the O 2 partial pressure from 10 to 20% increased the surface roughness from 4.0 to 15.1 nm. The Y 2 O 3 films, prepared using an O 2 partial pressure of 20% and annealed at 900 °C, exhibited the best surface roughness characteristics of the samples studied. For a substrate temperature above 400 °C and an O 2 partial pressure of 20%, we observed that a cubic Y 2 O 3 phase dominated the X-ray diffraction spectra. The lowest lattice mismatch achieved between the Y 2 O 3 film and the Si substrate was 1.75%. By using a two-step process, we reduced the leakage current density of Y 2 O 3 films by two orders of magnitude and the D it to as low as 8.72×10 10 cm −2 eV −1 . A Y 2 O 3 buffer layer grown at 400 °C in a 20% O 2 partial pressure and rapidly annealed at 900 °C in an oxygen enviroment exhibited the best overall properties for a single transistor ferroelectric random access memory.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Acoustic Wave Resonator Technologies · Advanced Sensor and Energy Harvesting Materials · Adhesion, Friction, and Surface Interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.