Buffer-assisted low temperature growth of high crystalline quality ZnO films using Pulsed Laser Deposition
Source abstract
Abstract
Pulsed Laser Deposition of high crystalline quality thin ZnO films on sapphire substrates necessitates a growth temperature of about 750 °C or higher while sharp interfaces in a multilayer structure suitable for optoelectronic devices are obtained at comparatively low growth temperatures. To meet these contradictory requirements a growth scheme has been evolved in which a ZnO buffer layer deposited at about 750 °C was found to facilitate high crystalline quality growth of a ZnO over layer even at 400 °C. The buffer layer grown at 750 °C was found to have its in plane lattice 30° rotated compared to that of the sapphire substrate and so was the case with the ZnO over layer grown at 400 °C on the buffer. The full width at half maximum of the high resolution X-ray diffraction rocking curves of (00.2) and (10.4) peaks of ZnO films grown at low temperature on the buffer were found to be ∼0.18° and ∼0.28°, respectively, which are comparable to 0.11° and 0.23° as observed in the case of films deposited directly at 750 °C and much better than the values of 0.46° and 0.48° seen in case of the films grown at 400 °C without any buffer layer. The buffer assisted low temperature ZnO growth also decreased the r.m.s. value of the surface roughness of the film to about 8 A from about 40 A of the one grown at high temperature without any buffer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Ga2O3 and related materials · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.