Thin-film polycrystalline silicon solar cells on ceramic substrates with a Voc above 500 mV
Source abstract
Abstract
Abstract Thin-film polycrystalline-silicon solar cells offer a promising alternative to standard silicon solar cells. Until now, however, obtained efficiencies are too low to lead to a cost reduction in photovoltaics. To obtain cells with higher efficiencies, polycrystalline-silicon layers need large grains, good passivation and an optimized cell design. In this work we compare pc-Si solar cells with an amorphous silicon–crystalline silicon heterojunction emitter to cells with a diffused phosphorus emitter. In heterojunction cells, hydrogen passivation was carried out before emitter formation, which appears to make it more effective. Open-circuit voltages ( V oc ) were much higher for cells with a heterojunction emitter, reaching values up to 520 mV. A maximum efficiency of 5.3% was obtained on the heterojunction cells, while the homojunction cells led to substantially lower efficiencies. A cell concept based on a heterojunction emitter seems therefore most favorable to lead to highly efficient thin-film pc-Si solar cells. The high V oc and efficiency values obtained in this work form an important step towards cost-effective polycrystalline-silicon solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.