The electrical and structural properties of HfO2/SrTiO3 stacked gate dielectric with TiN metal gate electrode
Source abstract
Abstract
Abstract The electrical and structural properties of HfO2/SrTiO3 composite gate dielectric are discussed for achieving higher dielectric constant to reduce equivalent oxide thickness (EOT) as well as to tune threshold voltage (VTH) in n-type metal oxide semiconductor transistor. Compared to atomic layer deposited (ALD) HfO2 alone, adding 0.5–1.0 nm sputtered SrTiO3 layer into ALD HfO2 gate dielectric attains EOT scaling down to about 0.6 nm, ~ 700 mV negative VTH shift, comparable gate leakage current at both fixed 1 V and VTH + 0.8 V overdrive conditions and electron mobility with of 137 cm2/V.s at 0.6 nm EOT. This is attributed to the significant modification of the interfacial layer (IL), resulting from Sr diffusion into sub-SiOx IL during subsequent anneal in gate-first transistor processes. It leads to SrOx IL formation between high-k gate insulator layer and Si substrate, where its dielectric constant is about three times higher than that of SiOx IL.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and devices · Electronic and Structural Properties of Oxides · Ferroelectric and Negative Capacitance Devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.