Sub-400 nm film thickness determination from transmission spectra in organic distributed feedback lasers fabrication
Source abstract
Abstract
The design and fabrication of thin-film based organic optoelectronic devices require knowledge of the film optical properties. A low-cost and non-destructive method often used for optical characterization of films is the well-established spectrophotometric envelope method. However, this method is typically limited to thickness above 400 nm, a value often higher than that of the films involved in these devices. This paper studies a procedure to obtain the thickness of sub-400 nm active films from their spectrophotometric trace when the refractive index is previously known. The proposed procedure is based on comparing the experimental transmission spectrum in the transparent spectral window with that obtained by simulation. The capabilities of the proposed method are demonstrated here by its application in the fabrication of organic distributed feedback lasers, for which a fine control of film thickness is important to obtain an optimized and reproducible response. Results are verified with other techniques, such as ellipsometry and profilometry. Thus, with the proposed method, film thickness can be easily determined down to 40 nm maintaining an accuracy of about 5 nm even for films with low refractive index (1.5–1.7). Different methods to determine refractive index of these films are also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor Lasers and Optical Devices · Photonic and Optical Devices · Nonlinear Optical Materials Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Influence of the emission layer thickness on the optoelectronic properties of solution processed organic light-emitting diodes10.1021/ph500186m ↗
2. Thickness dependent study of RF sputtered ZnO thin films for optoelectronic device applications10.1007/s13391-015-4445-y ↗
3. Organic semiconductor lasers10.1021/cr050152i ↗
4. Organic solid-state integrated amplifiers and lasers10.1002/lpor.201100034 ↗
5. Organic lasers : recent developments on materials, device geometries, and fabrication techniques10.1021/acs.chemrev.6b00172 ↗
6. Film thickness and grating depth variation in organic second-order distributed feedback lasers10.1063/1.4745047 ↗
7. Spectroscopic ellipsometry for functional nano-layers of flexible organic electronic devices
8. Spectroscopic ellipsometry of nanoscale materials for semiconductor device applications
9. Characterization of thin-film thickness10.1088/0026-1394/51/6/S302 ↗
10. A simple method for the determination of the optical constants n, k and the thickness of a weakly absorbing thin film10.1088/0022-3735/9/11/032 ↗
11. Determination of the thickness and optical constants of amorphous silicon10.1088/0022-3735/16/12/023 ↗
12. Determination of surface roughness and optical constants of inhomogeneous amorphous silicon films10.1088/0022-3735/17/10/023 ↗
13. Determining refractive index and thickness of thin films from wavelength measurements only10.1364/JOSAA.2.001339 ↗
14. Calculation of the thickness and optical constants of amorphous arsenic sulphide films from their transmission spectra10.1088/0022-3727/25/3/031 ↗
15. Optimisation of the envelope method for characterisation of optical thin film on substrate specimens from their normal incidence transmittance spectrum10.1016/j.tsf.2017.11.003 ↗
16. Methods for the determination of the optical constants of thin films from single transmission measurements: a critical review10.1088/0022-3727/36/15/316 ↗
17. An efficient and color-tunable solution-processed organic thin-film laser with a polymeric top-layer resonator10.1002/adom.201700238 ↗
18. Blue surface-emitting distributed feedback lasers based on TPD-doped films10.1364/AO.49.000463 ↗
19. Perylenediimide-based distributed feedback lasers with holographic relief gratings on dichromated gelatine10.1063/1.4813873 ↗
20. Diffraction gratings in dry developed dichromated gelatin films10.1016/S0040-6090(97)00649-4 ↗
21. VI methods for determining optical parameters of thin films10.1016/S0079-6638(08)70561-4 ↗
22. Abelès method revisited10.1364/AO.45.001120 ↗
23. Alternative to ellipsometry for characterizing transparent planar thin films10.1117/12.7972673 ↗
24. Dispersion properties of optical polymers10.12693/APhysPolA.116.585 ↗
25. Characteristics of optical polymers in the design of polymer and hybrid optical systems
26. Refractive-index and density matching in concentrated particle suspensions: a review10.1007/s00348-010-0996-8 ↗
27. Fabrication of a distributed-feedback dye laser with a grating structure in its plastic waveguide10.1364/AO.41.005030 ↗
28. Travelling-wave lasing of tpd solutions and neat films10.1016/S0379-6779(00)00231-9 ↗
29. Refractive characteristics of thin polymer films