journal article·2018-03Open access

Increased fracture depth range in controlled spalling of (100)-oriented germanium via electroplating

Dustin Crouse, John Simon, Kevin L. Schulte, David L. Young, Aaron J. Ptak, Corinne E. Packard

Thin Solid Films· Volume 649

Abstract

Abstract Controlled spalling in (100)-oriented germanium using a nickel stressor layer shows promise for semiconductor device exfoliation and kerfless wafering. Demonstrated spall depths of 7–60 μm using DC sputtering to deposit the stressor layer are appropriate for the latter application but spall depths
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and interfaces · Integrated Circuits and Semiconductor Failure Analysis · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Techno-economic analysis of three different substrate removal10.1002/pip.2776 ↗
2. 26.1% thin-film GaAs solar cell using epitaxial lift-off10.1016/j.solmat.2009.03.027 ↗
3. Kerf-less removal of Si, Ge, and III-V layers by controlled spalling to enable low-cost PV technologies10.1109/JPHOTOV.2012.2184267 ↗
4. Layer transfer by controlled spalling10.1088/0022-3727/46/15/152002 ↗
5. Alharbi · 2016 · 157
6. Advanced flexible CMOS integrated circuits on plastic enabled by controlled spalling technology
7. Ultralight high-efficiency flexible InGaP/(In)GaAs tandem solar cells on plastic10.1002/aenm.201200827 ↗
8. Energy band engineering of flexible gallium arsenide through substrate cracking with pre-tensioned films10.1002/pssr.201600163 ↗
9. Mixed mode cracking in layered materials10.1016/S0065-2156(08)70164-9 ↗
10. The cracking and decohesion of thin brittle films10.1557/JMR.1988.1043 ↗
11. Spalling of a thin Si layer by electrodeposit-assisted stripping
12. Controlled exfoliation of (100) GaAs-based devices by spalling fracture10.1063/1.4939661 ↗
13. Effects of process conditions on properties of electroplated Ni thin films for microsystem applications10.1149/1.2223302 ↗
14. Sweet · 2016
15. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
16. Celebrating the 100th anniversary of the Stoney equation for film stress: developments from polycrystalline steel strips to single crystal silicon wafers10.1016/j.tsf.2008.07.014 ↗
17. Engineering controlled spalling in (100)-oriented GaAs for wafer reuse
18. Bedell · 2016
19. Richerson · 2005
20. Tailoring and patterning the grain size of nanocrystalline alloys10.1016/j.actamat.2006.08.032 ↗
21. Structural transitions in electroplated Ni-P alloys10.1007/BF01730163 ↗
22. Electrochemical nickel–phosphorus alloy formation10.1179/095066003225008482 ↗
23. Dislocation strengthening in FCC metals and in BCC metals at high temperatures10.1016/j.actamat.2016.12.040 ↗
24. Anisotropy effects on the reliability of single-crystal silicon10.1016/j.scriptamat.2010.07.024 ↗
25. Single crystal flexible electronics enabled by 3D spalling
26. Sub-5 μm-thick spalled single crystal Si foils by decoupling crack initiation and propagation10.1063/1.4963292 ↗
27. Fracture toughness of germanium determined with the Vickers indentation technique10.1007/BF00723798 ↗
28. Dargys · 1994