Oxygen-sensing property of sol-gel-derived SrTi1−xFexO3−δ thin films with different iron concentrations (x=0.2–0.8)
Source abstract
Abstract
Abstract In this contribution, SrTi 1 − x Fe x O 3 − δ thin film gas sensors with different iron concentrations ( x = 0.2 to 0.8) were fabricated using a modified sol-gel spin-coating method and annealed at 650 °C for 1 h under synthetic air ambient. X-ray diffraction revealed the single phase polycrystalline structure of the thin films and their crystallinity decreased with iron concentrations. The films with high iron concentrations were not well crystallized and had large amount of amorphous-like structures, as indicated by transmission electron microscopy observation. The oxygen-sensing properties of the sensors were examined at different operating temperatures. The SrTi 1 − x Fe x O 3 − δ thin film sensors with x ≤ 0.4 showed a normal p-type-sensing response whereas sensors with x ≥ 0.5 exhibited anomalous n-type-sensing response. This abnormal-sensing behavior can be explained by amorphous-like structures in the films with higher iron concentrations, which was caused by incomplete formation of cubic perovskite phase.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Analytical Chemistry and Sensors · Acoustic Wave Resonator Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.