article·2007-11-08

Control of carrier concentration and surface flattening of CuGaO2 epitaxial films for a p-channel transparent transistor

Takashi Mine, Hiroshi Yanagi, Kenji Nomura, Toshio Kamiya, Masahiro Hirano, Hideo Hosono

Publisher page

Abstract

Abstract A p-type transparent oxide semiconductor, CuGaO 2 , was grown epitaxially on (111) single-crystalline yttria-stabilized zirconia (YSZ) substrates by pulsed laser deposition (PLD). Single-phase epitaxial films were obtained in narrow conditions: i.e. 725 ≤ T s ≤ 780 °C at P O 2 = 6 Pa, and 3 Pa ≤ P O 2 ≤ 6 Pa at T s = 750 °C. The electrical conductivity of the as-deposited films was controlled from 3.3 × 10 − 5 S∙cm − 1 to 1.7 × 10 − 2 S∙cm − 1 by increasing the oxygen partial pressure from 3 to 6.5 Pa. The hole concentration and Hall mobility of the most conductive film were 5 × 10 17 cm − 3 and 0.2 cm 2 ∙V − 1 ∙s − 1 , respectively. Estimated from the conductivity, the hole concentration was controlled from ∼ 10 14 cm − 3 to ∼ 10 17 cm − 3 by the oxygen partial pressure. Post-annealing at 1215 °C smoothed the films surface to 0.56 nm in the root-mean-squares roughness and increased the Hall mobility to 0.8 cm 2 V − 1 ∙s − 1 , which is the largest value among CuGaO 2 films reported to date.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Copper-based nanomaterials and applications · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.