Electroless Cu plating on glass substrates via repeated Sn-sensitization and Pd-activation cycles without adhesion promoter layers
Source abstract
Abstract
• Strong adhesion between glass and Cu is achieved by electroless plating. • The conventional method of Sn sensitization and Pd activation is applied. • Optimizing the number of alternating sensitization and activation cycles is key. • A dense single-particle layer is favorable for strong adhesion. • The process is cheap and highly productive without an adhesion promotor. In recent years, glass substrates have gained significant attention as packaging materials for semiconductor chips and high-frequency devices, owing to their rigidity, dimensional stability, and surface smoothness. These substrates often incorporate through-glass vias formed perpendicular to the surface. Various fundamental studies have been conducted to meet the growing demand for increased computing power. However, ensuring strong adhesion between the deposited Cu layer and glass surface remains a major challenge. In this study, a Cu metallization process was investigated that achieves strong adhesion without the need for an adhesion promoter layer (APL) prior to electroless plating (ELP). The experimental conditions in the traditional ELP process, which involves repeated sensitization and activation cycles using Sn²⁺ and Pd²⁺, were optimized, and a peel strength of 6 N·cm⁻ 1 between the deposited Cu layer and surface of the glass substrate was achieved by optimizing the number of sensitization and activation cycles. Increasing the number of sensitization and activation cycles enhanced the coverage of the glass surface with particulate Sn-Pd mixtures, leading to nearly full coverage and optimal Cu adhesion. However, excessive cycling caused the accumulation of Sn–Pd catalyst particles, which diminished the adhesion of the Cu layer. The developed method circumvents the limitations associated with conventional APLs and offers cost-effective, high throughput processing suitable for industrial application.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Electrodeposition and Electroless Coatings · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Recent advances and trends in advanced packaging10.1109/TCPMT.2022.3144461 ↗
2. Y.J. Mii, Semiconductor industry outlook and new technology frontiers IEEE International Electron Devices Meeting (IEDM), 2024, pp. 1–6. https://doi.org/10.1109/IEDM50854.2024.10873484.10.1109/IEDM50854.2024.10873484 ↗
3. Advancing chiplet architecture through heterogeneous integration on laser-processed glass substrates, 10th Electronics System-Integration Technology Conference (ESTC)
4. Antenna with embedded die in glass interposer for 6G wireless applications10.1109/TCPMT.2023.3251725 ↗
5. Glass interposer integration of logic and memory chiplets: PPA and power/signal integrity benefits10.1109/TCAD.2024.3504361 ↗
6. design and demonstration of a 2.5-D glass interposer BGA package for high bandwidth and low cost10.1109/TCPMT.2017.2659700 ↗
7. RF glass technology is going mainstream: review and future applications10.1109/JMW.2023.3256413 ↗
8. Interposer technologies for high-performance applications10.1109/TCPMT.2017.2674686 ↗
9. Chiplet heterogeneous integration
10. Chiplet technology and heterogeneous integration
11. Recent advances and trends in chiplet design and heterogeneous integration packaging10.1115/1.4062529 ↗
12. Dielectric properties of glasses at ultra-high frequencies and their relation to composition10.1111/j.1151-2916.1946.tb11596.x ↗
13. Glass for 5G applications10.1063/5.0057324 ↗
14. Low-loss glass substrates formulated with a variety of dielectric characteristics for millimeter-wave applications
15. Plating of copper into through-holes and vias10.1149/1.2096587 ↗
16. A critical review of copper electroless deposition on glass substrates for microsystems packaging applications10.1080/02670844.2022.2142002 ↗
17. Adhesive enabling technology for directly plating copper onto glass/ceramic substrates, 64th Electronic Components and Technology Conference (ECTC)
18. Adhesive wet metallization on TiO2-coated glass
19. Copper plating on glass using a solution processed copper-titanium oxide catalytic adhesion layer10.1149/2.0071606jes ↗
20. Electroless copper plating on a glass substrate coated with ZnO film under UV illumination10.1016/S0022-0728(98)00405-7 ↗
21. Electroless copper plating using ZnO thin film coated on a glass substrate10.1149/1.2054935 ↗
22. Selective metallization of glass with improved adhesive layer and optional hydrophobic surface10.1016/j.colsurfa.2021.126339 ↗
23. Electroless plating of copper on surface-modified glass substrate10.1016/j.apsusc.2011.04.100 ↗
24. Bottom-up engineering of subnanometer copper diffusion barriers using NH2-derived self-assembled monolayers10.1002/adfm.200902072 ↗
25. Cui · 2007 · 37
26. Electroless deposition of Cu on glass and patterning with microcontact printing10.1021/la034748h ↗
27. Electrochemical copper metallization of glass substrates mediated by solution-phase deposition of adhesion-promoting layers10.1149/2.1071514jes ↗
28. Low temperature dielectric studies of zinc oxide (ZnO) nanoparticles prepared by precipitation method10.1016/j.apt.2012.08.005 ↗
29. Temperature dependence of the permittivity and loss tangent of high-permittivity materials at terahertz frequencies10.1109/TMTT.2005.845752 ↗
30. Experimental study on glass and polymers: determining the optimal material for potential use in terahertz technology10.1109/ACCESS.2020.2996278 ↗
31. Chemical etching and patterning of copper, silver, and gold films at low temperatures10.1149/2.0111501jss ↗
32. Resist materials and processes for extreme ultraviolet lithography10.7567/JJAP.52.010002 ↗
33. Electroless plating of copper and nickel on surface-modified poly(tetrafluoroethylene) films10.1149/1.1337609 ↗
34. Process development and adhesion behavior of electroless copper on liquid crystal polymer (LCP) for electronic packaging application10.1109/TEPM.2002.807722 ↗
35. A review of electroless coatings on non-metals: bath conditions, properties and applications10.1016/j.jallcom.2023.170723 ↗
36. Improving copper plating adhesion on glass using laser machining techniques and areal surface texture parameters10.1016/j.optlaseng.2015.06.004 ↗
37. Continuous electroless seed layer deposition in through-glass-vias by ultrasonic agitation10.1109/TCPMT.2024.3419836 ↗
38. Facilitating electroless metalization of blind holes in glass substrates by electrochemical discharge-assisted surface roughening10.1016/j.matlet.2023.135853 ↗
39. Localized surface roughening to improve adhesion of electroless seed layer in through-glass vias10.1016/j.mssp.2024.108757 ↗
40. Effects of non-gaussian surface roughness on conductor loss in high-frequency transmission lines10.1109/TCPMT.2024.3383879 ↗
41. Signal transmission loss due to copper surface roughness in high-frequency region
42. Electroless plating catalyst performance of a cationic moiety bearing palladium complex10.1149/2.0861414jes ↗
43. The morphology of electroless Ni deposition on a colloidal Pd (II) catalyst10.1149/1.2044280 ↗
44. The nucleation with SnCl2-PdCl2 solutions of glass before electroless plating10.1149/1.2403321 ↗
45. Tin sensitization for electroless plating review10.1149/2.047405jes ↗
46. Cu metallisation on glass substrate with through glass via using wet plating process10.1080/00202967.2021.1877471 ↗
47. Hybrid method for metallization of glass interposers10.1149/2.038312jes ↗
48. Recent advances in electroplating of through-hole copper interconnection10.1007/s12678-021-00687-2 ↗
49. Through-hole filling by copper electroplating10.1149/1.2988134 ↗
50. A study on glass surface activation process to enhance glass-metal adhesion strength in glass advanced packaging
51. High reliability and high performance 30μm through-package-vias in ultra-thin bare glass interposer
52. Copper electroless deposition on NiTi shape memory alloy: an XPS study of Sn–Pd–Cu growth10.1016/S0169-4332(99)00280-9 ↗
53. RHEED and XPS study of Pd–Sn bimetallic system growth10.1016/j.susc.2007.04.215 ↗
54. An electrochemical and XPS study of the electrodeposited binary Pd-Sn catalyst: the electroreduction of nitrate ions in acid medium10.1016/j.jelechem.2005.12.015 ↗
55. Comparison of stannous and stannic chloride as sensitizing agents in the electroless deposition of silver on glass using X-ray photoelectron spectroscopy10.1016/0165-1633(82)90022-3 ↗
56. A Rutherford scattering study of catalyst systems for electroless Cu plating: II. SnCl2 sensitization and PdCl2 activation10.1149/1.2134045 ↗
57. Electroless plating on polymer surfaces: comprehensive review of mechanism, process, analysis, and future applications10.1002/admi.202400931 ↗
58. Wet etching of thin SnO2 films10.1016/0924-4247(90)80049-B ↗
59. Challenges of adhesion promotion for the metallization of glass interposers10.4071/isom-2013-WP15 ↗
60. Liquid phase deposition film of tin oxide10.1016/S0022-3093(96)00583-2 ↗