Fabrication and characterization of ZnS and ZnSe absorber layers for UV-selective transparent photovoltaics
Source abstract
Abstract
We have fabricated ZnS, ZnSe and mixed Zn(S,Se) thin film layers for application as solar cell absorbers in ultraviolet (UV)-selective solar cells. We fabricated the thin film layers using a two-step process involving evaporation of the Zn layer followed by an anneal in an H2S and/or H2Se containing atmosphere. A study of the annealing conditions was performed to minimize hole formation in the thin film layer. A mixed Sulfur and Selenium containing layer was also developed in order to reach a 3 eV band gap, such that the layer absorbs all the UV light and leaves the visible light passing through. Next, we tried to increase the conductivity of the layer by adding extrinsic doping elements. Cu was found to increase the conductivity by more than three orders of magnitude, while leaving the transparency of the layer mostly unchanged. Finally, solar cell devices were fabricated using transparent back and front contacts and a NiO buffer layer. We could measure a very small photocurrent of about 100 A/cm2 and an open circuit voltage of about 500 mV under AM1.5G illumination.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · solar cell performance optimization · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.