journal article·2023-06Open access

Characteristics of thin Sb2Se3 films obtained by the chemical molecular beam deposition method for thin-film solar cells

T.M. Razykov, K.M. Kuchkarov, M.S. Tivanov, D.S. Bayko, L.S. Lyashenko, B.A. Ergashev, A. Mavlonov, A.N. Olimov, R. Khurramov, D.Z. Isakov, M. Pirimmatov

Thin Solid Films· Volume 774

Abstract

Sb2Se3 films were obtained by chemical molecular beam deposition on soda-lime glass substrates. As a source material, 99.999% purity semiconductor Sb2Se3 pieces were used. Their evaporation and the substrate temperature were maintained at 830 °C÷1000 °C and 500 °C, respectively. Using scanning electron microscopy, X-ray diffraction analysis, and Raman scattering, the influence of the temperature of the source of the binary compound Sb2Se3 on the chemical composition, morphology, and structure of the synthesized films of Sb2Se3 films was studied. It is observed that the films have a crystalline (orthorhombic) structure with compactly located crystallites having the form of rods with an average size: l = 5÷10 µm (length) and d = 1÷2 µm (diameter). An analysis of the dependency functions (αhν)2 = f(hν) showed that the Sb2Se3 films obtained at temperatures Тsource=900 °C and Тsource=840 °C have direct transitions with an optical band gap Еg=1.04 eV and Еg=1.12 eV, respectively. The electrical conductivity of the films, changed within 1.03·10−5÷4.13·10−5 (Om·cm)−1 depending on the ratio of Sb/Se atomic concentration.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Development of antimony sulfide–selenide Sb2(S,Se)3 -based solar cells10.1016/j.jechem.2017.09.031 ↗
2. Antimony sulfide-selenide thin film solar cells produced from stibnite mineral10.1016/j.tsf.2017.11.004 ↗
3. A review of Sb2Se3 photovoltaic absorber materials and thin-film solar cells10.1016/j.solener.2020.03.009 ↗
4. Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries10.1038/nphoton.2015.78 ↗
5. Thermal evaporation and characterization of Sb2Se3 thin film for substrate Sb2Se3/CdS solar cells10.1021/am502427s ↗
6. Enhanced Sb2Se3 solar cell performance through theory-guided defect control10.1002/pip.2900 ↗
7. 9.2%-efficient core-shell structured antimony selenide nanorod array solar cells10.1038/s41467-018-07903-6 ↗
8. Crystal growth direction-controlled antimony selenide thin film absorbers produced using an electrochemical approach and intermediate thermal treatment10.1016/j.solmat.2017.07.004 ↗
9. Deposition of metal chalcogenide thin films by successive ionic layer adsorption and reaction (SILAR) method10.1007/BF02708491 ↗
10. Chemical vapour deposition of antimony chalcogenides with positional and orientational control: precursor design and substrate selectivity10.1039/C4TC02327G ↗
11. Solution-processed antimony selenide heterojunction solar cells10.1002/aenm.201301846 ↗
12. Novel single source precursor for synthesis of Sb2Se3 nanorods and deposition of thin films by AACVD: photo-electrochemical study for water reduction catalysis10.1016/j.solener.2018.05.026 ↗
13. Effect of temperature on the optical parameter of amorphous Sb-Se thin films
14. Enhanced Sb2Se3 solar cell performance through theory-guided defect control10.1002/pip.2900 ↗
15. STable 6%-efficient Sb2Se3 solar cells with a ZnO buffer layer10.1038/nenergy.2017.46 ↗
16. Vapor transport deposition of antimony selenide thin film solar cells with 7.6% efficiency10.1038/s41467-018-04634-6 ↗
17. Facile preparation and enhanced photoelectrical performance of Sb2Se3 nano-rods by magnetron sputtering deposition10.1016/j.solmat.2016.10.042 ↗
18. Stable and efficient CdS/Sb2Se3 solar cells prepared by scalable close space sublimation10.1016/j.nanoen.2018.04.044 ↗
19. Role of the substrates in the ribbon orientation of Sb2Se3 films grown by low-temperature pulsed electron deposition10.1016/j.solmat.2020.110724 ↗
20. Substrate dependence on (Sb4Se6)n ribbon orientations of antimony selenide thin films: morphology, carrier transport and photovoltaic performance10.1016/j.jallcom.2021.158703 ↗
21. Growth of one-dimensional Sb2S3 and Sb2Se3 crystals with straw-tied-like architectures10.1016/j.jcrysgro.2005.04.064 ↗
22. Vibrational properties and bonding nature of Sb2Se3 and their implications for chalcogenide materials10.1039/C5SC00825E ↗
23. Morphological and structural characteristics of sb2se3thin films fabricated by chemical molecular beam deposition10.3103/S0003701X19060094 ↗
24. Investigation of the Miscibility Gaps in the Binary Systems Silver-Tellurium, Indium-Tellurium, Gallium-Tellurium, Thallium-Tellurium and Antimony-Selenium,”Scr
25. Multiwavelength excitation Raman scattering study of Sb2Se3 compound: fundamental vibrational properties and secondary phases detection10.1088/2053-1583/ab4029 ↗
26. On the identification of Sb2Se3 using Raman scattering10.1557/mrc.2018.94 ↗
27. Laser effects on phase transition for cubic Sb2O3 microcrystals under high pressure10.1039/C7TC01289F ↗
28. Evolution of amorphous selenium nanoballs in silicone oil and their solvent induced morphological transformation
29. Raman and Infrared Spectra of Rhombohedral Selenium10.1143/JJAP.20.463 ↗
30. Sb2O3/Sb2O4 in reducing/oxidizing environments: an in situ Raman spectroscopy study10.1021/j100095a008 ↗
31. Effects of substrate temperature and SnO2 high resistive layer on Sb2Se3 thin film solar cells prepared by pulsed laser deposition10.1016/j.solmat.2019.110381 ↗
32. Effect of selenization temperature on the properties of Sb2Se3 thin films and solar cells by two‑step method10.1007/s10854-019-02354-1 ↗
33. Annealing induced microstructure engineering of antimony tri-selenide thin films10.1016/j.materresbull.2017.11.014 ↗