article·2017-06-13

Multilayer organic photovoltaic devices fabricated by electrospray deposition technique and the role of the interlayer

Atsushi Kimoto, Hideaki Takaku, Harumi Hayakawa, Mika Koseki, Rie Ishihama, Tetsuya Aoyama, Yusuke Tajima

Publisher page

Abstract

Abstract Multilayer organic photovoltaic (OPV) devices were fabricated using the electrospray deposition method. The film-formation conditions and particularly the solvent composition were investigated to reveal the importance of the boiling point and polarity of the component solvents. The deposited film must be semi-wet to form a flat film by slow-drying at ambient conditions, resulting from the high boiling point and high affinity of o -dichlorobenzene for poly(3-hexylthiophene) (P3HT) and [6,6]-C 70 -butyric acid methyl ester (PC 70 BM). On the other hand, a polar solvent assists in the formation of an electrospray with a wide spray range under an applied voltage. Employing the film formation conditions, double-layered (P3HT and PC 70 BM) and triple-layered (P3HT, interlayer, and PC 70 BM) OPV devices were fabricated. A diketopyrrolopyrrole derivative, which is a near-infrared-absorbing ambipolar semiconductor, was applied as the interlayer material. By comparing the two devices, it was determined that the interlayer acts as a sensitizer at around 700 nm for the P3HT–PC 70 BM system.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Organic Light-Emitting Diodes Research · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.