journal article·2020-06

Comparison of Cu and Co Integration with Porous Low-k SiOCH Dielectrics

Yi-Lung Cheng, Hong-Chang Huang, Chih-Yen Lee, Giin-Shan Chen, Jau-Shiung Fang

Thin Solid Films· Volume 704
Publisher page

Abstract

Abstract Continuous scaling in back-end-of-line interconnects brings about a significant increase in the line resistance for advanced integrated circuits. To alleviate this issue, cobalt (Co) is proposed to replace copper (Cu) as an interconnect conductor. Effects of different metals (Cu and Co) on the electrical characteristics and reliability of the porous carbon-doping low-dielectric-constant (low-k) films were evaluated in this study. Compared with Cu/porous low-k integration, Co/porous low-k integration exhibited less degradation in the electrical characteristics and reliability under thermal or electrical stress. This study suggests that Co interconnects can provide barrier-free or barrier-less processing, which is a promising strategy for advanced semiconductor technology nodes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper Interconnects and Reliability · Semiconductor materials and devices · Electrodeposition and Electroless Coatings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Porous pSiCOH ultralow-k dielectrics for chip interconnects prepared by PECVD10.1146/annurev-matsci-082908-145305 ↗
2. Low dielectric constant materials for microelectronics10.1063/1.1567460 ↗
3. Progress in the development and understanding of advanced low k and ultralow k dielectrics for very large-scale integrated interconnects—State of the art10.1063/1.4861876 ↗
4. Metal drift induced electrical instability of porous low dielectric constant film10.1063/1.1563292 ↗
5. Interconnect reliability – A study of the effect of dimensional and porosity scaling10.1016/j.mee.2010.07.011 ↗
6. Effect of barrier process on electromigration reliability of Cu/porous low-k interconnects10.1063/1.2219003 ↗
7. Cu/low-k dielectric TDDB reliability issues for advanced CMOS technologies10.1016/j.microrel.2008.06.037 ↗
8. Advanced metallization developments for 32-nm node CMOS technology contact architecture
9. Comprehensive study of the resistivity of copper wires with lateral dimensions of 100 nm and smaller10.1063/1.1834982 ↗
10. Electron mean free path in elemental metals electron mean free path in elemental metals10.1063/1.4942216 ↗
11. Cobalt advanced barrier metallization: a resistivity composition analysis10.1016/j.mee.2014.09.017 ↗
12. Selective co growth on cu for void-free via fill
13. Co and CoTix for contact plug and barrier layer in integrated circuits10.1016/j.mee.2017.12.017 ↗
14. Comparison of various low dielectric constant materials10.1016/j.tsf.2018.02.042 ↗
15. Electrical and reliability characteristics of dielectric stack with low dielectric constant SiCOH and capping SiCNH films10.1016/j.surfcoat.2018.06.071 ↗
16. Time dependent dielectric breakdown of cobalt and ruthenium interconnects at 36nm pitch
17. Effect of moisture on electrical and reliability properties for low dielectric constant materials10.1016/j.mee.2013.08.018 ↗
18. Study of metal barrier deposition-induced damage to porous low-k materials10.1016/j.mee.2011.05.002 ↗
19. Metal-Dielectric Interfaces in Gigascale Electronics: Thermal and Electrical Stability10.1007/978-1-4614-1812-2 ↗
20. Plasma processing of low-k dielectrics10.1063/1.4765297 ↗
21. Fundamental understanding of porous low-k dielectric breakdown
22. Electron fluence driven, Cu catalyzed, interface breakdown mechanism for BEOL low-k time dependent dielectric breakdown10.1016/j.microrel.2013.12.020 ↗
23. Time dependent dielectric breakdown physics-Models revisited10.1016/j.microrel.2012.06.007 ↗
24. Modeling of TDDB in advanced Cu interconnect systems under BTS conditions10.1016/j.mee.2011.04.070 ↗
25. Effect of thermal treatment on physical, electrical properties and reliability of porogen-containing and porogen-free ultralow-k dielectric10.1016/j.tsf.2012.09.088 ↗
26. Impact of carbon-doping on time dependent dielectric breakdown of SiO2-based films10.1016/j.mee.2011.05.002 ↗
27. Copper ion diffusion in porous and nonporous SiO2-based dielectrics using bias thermal stress and thermal stress tests10.1016/j.tsf.2007.10.011 ↗