Role of MoO 3 -modified organic photovoltaic-type charge generation layer in tandem organic light-emitting diodes
Source abstract
Abstract
Abstract The role of each part in MoO 3 -modified organic photovoltaic (OPV)-type charge generation layer (CGL) was investigated by incorporation into hole-only devices. The OPV heterojunction (HJ) consists of fullerene (C60) and copper phthalocyanine (CuPc). According to the electrical characteristics of hole-only devices, it was found that charge generation mainly took place at the interface between MoO 3 and hole transport layer rather than the interface of C60–CuPc HJ under an electric field. The C60–CuPc HJ exhibited good charge generation in the presence of photons due to photovoltaic effect, despite its poorer charge generation upon an application of electric field. In addition, charges can be also generated at CuPc/MoO 3 interface upon a relatively high electric field since the absorption band of charge transfer complex formed by CuPc and MoO 3 is within visible region. These results, which had been rarely reported in the previous studies on OPV-type CGL, can well explain the experimental results of tandem organic light-emitting diodes (OLEDs) with MoO 3 modified OPV-type CGLs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. High-efficiency tandem organic light-emitting diodes10.1063/1.1638624 ↗
2. Tandem organic light-emitting diode using hexaazatriphenylene hexacarbonitrile in the intermediate connector10.1002/adma.200700454 ↗
3. High power efficiency tandem organic light-emitting diodes based on bulk heterojunction organic bipolar charge generation layer10.1063/1.3599557 ↗
4. Efficiency enhancement utilizing hybrid charge generation layer in tandem organic light-emitting diodes10.1063/1.4732505 ↗
5. Highly stable and high power efficiency tandem organic light-emitting diodes with transition metal oxide-based charge generation layers10.1016/j.orgel.2015.04.010 ↗
6. Tandem organic light-emitting diodes10.1002/adma.201601737 ↗
7. High efficiency tandem organic light-emitting devices with Al/WO3/Au interconnecting layer10.1063/1.2787877 ↗
8. Tandem white organic light-emitting device using non-modified Ag layer as cathode and interconnecting layer10.1016/j.orgel.2013.12.030 ↗
9. The mechanism of charge generation in charge-generation units composed of p-doped hole-transporting layer/HATCN/n-doped electron-transporting layers10.1002/adfm.201102212 ↗
10. C60/N,N′-bis(1-naphthyl)-N,N′-diphenyl-1,1′-biphenyl-4,4′-diamine: MoO3 as the interconnection layer for high efficient tandem blue fluorescent organic light-emitting diodes10.1063/1.4811551 ↗
11. High-efficiency orange and tandem white organic light-emitting diodes using phosphorescent dyes with horizontally oriented emitting dipoles10.1002/adma.201400330 ↗
12. Effective organic-based connection unit for stacked organic light-emitting devices10.1063/1.2357846 ↗
13. High efficiency tandem organic light emitting diode using an organic heterojunction as the charge generation layer: an investigation into the charge generation model and device performance10.1021/acsphotonics.5b00010 ↗
14. Highly efficient p-i-n and tandem organic light-emitting devices using an air-stable and low-temperature-evaporable metal azide as an n-dopant10.1002/adfm.201000137 ↗
15. Tandem white phosphorescent organic light-emitting diodes based on interface-modified C60/pentacene organic heterojunction as charge generation layer10.1063/1.3628317 ↗
16. Organic semiconductor heterojunctions as charge generation layers and their application in tandem organic light-emitting diodes for high power efficiency10.1039/c2jm32246c ↗
17. Interfacial electronic structures of buffer-modified pentacene/C60-based charge generation layer10.1016/j.orgel.2014.12.005 ↗
18. Organic semiconductor heterojunction as charge generation layer in tandem organic light-emitting diodes for high power efficiency10.1016/j.orgel.2012.03.013 ↗
19. Efficient tandem organic light-emitting device based on photovoltaic-type connector with positive cycle10.1063/1.4773591 ↗
20. A red tandem organic light-emitting diode based on organic photovoltaic-type charge generation layer10.1016/j.orgel.2015.12.029 ↗
21. Effect of bulk and planar heterojunctions based charge generation layers on the performance of tandem organic light-emitting diodes10.1016/j.orgel.2015.12.020 ↗
22. Highly efficient tandem organic light-emitting diodes based on SubPc:C60 bulk heterojunction as charge generation layer10.1016/j.jlumin.2015.08.040 ↗
23. Field- and thickness-dependent performance of tandem organic light-emitting diodes with buffer-modified fullerene/copper phthalocyanine heterojunction as interconnector10.1016/j.cap.2014.08.016 ↗
24. Mechanism of charge generation in p-type doped layer in the connection unit of tandem-type organic light-emitting devices10.1063/1.2969293 ↗
25. Charge generation mechanism of metal oxide interconnection in tandem organic light emitting diodes10.1021/jp212090b ↗
26. Correlation between the electronic structures of transition metal oxide-based intermediate connectors and the device performance of tandem organic light-emitting devices10.1039/c1jm12515j ↗
27. Electronic structures of MoO-based charge generation layer for tandem organic light-emitting diodes10.1063/1.3479477 ↗
28. Formation of Ohmic hole injection by inserting an ultrathin layer of molybdenum trioxide between indium tin oxide and organic hole-transporting layers10.1063/1.2825275 ↗
29. Bulk and interface properties of molybdenum trioxide-doped hole transporting layer in organic light-emitting diodes10.1016/j.orgel.2007.12.001 ↗
30. Highly efficient hybrid white tandem organic light-emitting diodes with MoO3 layer10.1002/cjoc.201500266 ↗
31. Light out-coupling enhancement of organic light-emitting devices with microlens array10.1063/1.3521413 ↗
32. Dual enhancing properties of LiF with varying positions inside organic light-emitting devices10.1016/j.orgel.2007.07.005 ↗
33. Low operating-voltage and high power-efficiency OLED employing MoO3-doped CuPc as hole injection layer10.1016/j.displa.2011.10.002 ↗
34. Effect of CuPc and MoO3 co-evaporated layer on the conductivity of organic light emitting diodes10.1088/1674-1056/24/9/097201 ↗
35. Voltage reduction in organic light-emitting diodes10.1063/1.1374998 ↗