Thickness optimization of SnO2 electron transporting layer in perovskite solar cells assembled under ambient atmosphere
Source abstract
Abstract
Perovskite solar cells (PSCs) were assembled in ambient environment using different SnO 2 electron transporting layers (ETLs) to explore the optimized SnO 2 thickness. For this purpose, All PSCs had the low-cost architecture of FTO/b-TiO 2 (block-TiO 2)/SnO 2/m-TiO 2 (mesoporous-TiO 2)/MAPbI 3 (CH 3NH 3PbI 3)/CIS (CuInS 2)/carbon cathode. The influence of the SnO 2 layer thickness was investigated onto the PSCs performances. The solar cell fabricated by L1-SnO 2 layer had a thickness of about 582 nm and the SnO 2 film thickness enlarged as the number of SnO 2 layers was increased. The optimum ETL was achieved via deposition of one SnO 2 layer (L1), which exhibited a uniform, hole‐free, and compact film surface. The champion PSC device fabricated with L1 SnO 2 layer displayed the biggest average power conversion efficiency (PCE) of 12.60%, which was nearly 1.75 times larger than the average PCE= 7.19% for the champion SnO 2-free device. As the SnO 2 film thickness decreased, the PSC efficiency diminished so that the lowest PCE= 6.29% was measured for the device based on the L5-SnO 2 ETL. The EIS spectra verified the lowest recombination of charge carriers and the most efficient charge extraction at L1 ETL and perovskite layer interface among all devices. As a result, the PSC with L1 SnO 2 layer could be applied to fabricate economical and efficient PSC devices.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Lead-free solid-state organic–inorganic halide perovskite solar cells10.1038/nphoton.2014.82 ↗
2. Enhanced Sn-based perovskite solar cells with PEDOT:PSS layer doped with edetate disodium10.1016/j.synthmet.2022.117156 ↗
3. Photovoltaics reaching for the shockley–queisser limit10.1021/acsenergylett.0c01790 ↗
4. Dye sensitized solar cells go beyond using perovskite and spinel inorganic materials: a review10.1016/j.rser.2021.112047 ↗
5. The emergence of halide layered double perovskites10.1021/acsenergylett.0c01867 ↗
6. A realistic methodology for 30% efficient perovskite solar cells10.1016/j.chempr.2020.04.013 ↗
7. Chapter 14 - Perovskite solar cells as modern nano tools and devices in solar power energy
8. Perovskite solar cells: from materials to devices10.1002/smll.201402767 ↗
9. Balancing electrical and optical losses for efficient 4-terminal Si–perovskite solar cells with solution processed percolation electrodes10.1039/C7TA10945H ↗
10. Optimization of TiO2 paste concentration employed as electron transport layers in fully ambient air processed perovskite solar cells with a low-cost architecture10.1016/j.ceramint.2021.09.107 ↗
11. Fabrication of two-dimensional hybrid organic–inorganic lead halide perovskites with controlled multilayer structures by liquid-phase laser ablation10.1039/D2TC04395E ↗
12. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
13. Constructing hole transporting highway for high-efficiency perovskite solar cells10.1016/j.synthmet.2022.117174 ↗
14. Organohalide lead perovskites for photovoltaic applications10.1039/C4EE00942H ↗
15. Enhanced efficiency of quantum dot sensitized solar cells using Cu2O/TiO2 nanocomposite photoanodes10.1016/j.jallcom.2017.12.036 ↗
16. Improving stability of perovskite solar cells using fullerene-polymer composite electron transport layer10.1016/j.synthmet.2022.117028 ↗
17. Recent progress in organohalide lead perovskites for photovoltaic and optoelectronic applications10.1016/j.ccr.2017.10.021 ↗
18. Recent progress in development of diverse kinds of hole transport materials for the perovskite solar cells: a review10.1016/j.rser.2019.109608 ↗
19. Recent advances in perovskite solar cells: efficiency, stability and lead-free perovskite10.1039/C7TA00366H ↗
20. 4-Carboxyphenyl isothiocyanate as a Lewis base additive for efficient and stable perovskite solar cells10.1016/j.synthmet.2022.117276 ↗
21. Optimization of Ag/PCBM interface via solvent treatment for efficient perovskite solar cell10.1016/j.synthmet.2022.117144 ↗
22. Role of surface recombination in perovskite solar cells at the interface of HTL/CH3NH3PbI310.1016/j.nanoen.2019.104186 ↗
23. Tailoring multifunctional passivation molecules with halogen functional groups for efficient and stable perovskite photovoltaics10.1016/j.cej.2020.127204 ↗
24. Variation of interfacial interactions in PC61BM-like electron-transporting compounds for perovskite solar cells10.1021/acsami.9b09018 ↗
25. Development of perovskite solar cells with >25% conversion efficiency10.1016/j.joule.2021.04.008 ↗
26. Multifunctional molecular modulators for perovskite solar cells with over 20% efficiency and high operational stability10.1038/s41467-018-06709-w ↗
27. A road towards 25% efficiency and beyond: perovskite tandem solar cells10.1039/C6ME00041J ↗
28. Synthesis methods of NiOx nanoparticles and its effect on hole conductivity and stability of n-i-p perovskite solar cells10.1016/j.synthmet.2022.117115 ↗
29. Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells10.1038/s41586-021-03406-5 ↗
30. Surface passivation boosted performances of perovskite solar cells assembled under ambient conditions10.1016/j.optmat.2022.112746 ↗
31. Close-loop recycling of perovskite solar cells through dissolution-recrystallization of perovskite by butylamine
32. Low melting point metal alloys for cost-efficient deposition of electrodes in perovskite solar cells10.1016/j.synthmet.2023.117301 ↗
33. Improving efficiency of polymer hole transport layer based perovskite solar cells via interfacial modification10.1016/j.synthmet.2022.117247 ↗
34. Small molecule modulator at the interface for efficient perovskite solar cells with high short-circuit current density and hysteresis free10.1002/aelm.202000604 ↗
35. Design, synthesis, optical studies, and application of all-inorganic layered double perovskites as stabilizers in ambient air processed perovskite solar cells10.1016/j.materresbull.2022.112088 ↗
36. MXene-based tailoring of carrier dynamics, defect passivation, and interfacial band alignment for efficient planar p–i–n perovskite solar cells10.1021/acsaem.1c01669 ↗
37. A novel interface layer for inverted perovskite solar cells fabricated in ambient air under high humidity conditions10.1016/j.solener.2020.08.013 ↗
38. Amines modulation and passivation yields record perovskite optoelectronic devices10.1016/j.jechem.2020.07.052 ↗
39. Hole-transport material-free perovskite-based solar cells10.1557/mrs.2015.174 ↗
40. Multifunctional fullerene derivative for interface engineering in perovskite solar cells10.1021/jacs.5b10614 ↗
41. Recent progress in electron transport layers for efficient perovskite solar cells10.1039/C5TA09011C ↗
42. Performance improvement of dye-sensitized double perovskite solar cells by adding Ti3C2Tx MXene10.1016/j.cej.2022.136963 ↗
43. Amino-functionalized niobium-carbide mxene serving as electron transport layer and perovskite additive for the preparation of high-performance and stable methylammonium-free perovskite solar cells10.1002/adfm.202113367 ↗
44. Dual-layer synergetic optimization of high-efficiency planar perovskite solar cells using nitrogen-rich nitrogen carbide as an additive10.1039/D2TA05520A ↗
45. Photoluminescence properties of SnO2 nanoparticles synthesized by sol− gel method10.1021/jp036741e ↗
46. Fabrication of CdS quantum dot sensitized solar cells using nitrogen functionalized CNTs/TiO2 nanocomposites10.1016/j.diamond.2017.11.004 ↗
47. Direct Deposition of Nonaqueous SnO2 Dispersion by Blade Coating on Perovskites for the Scalable Fabrication of p–i–n Perovskite Solar Cells10.1021/acsaem.1c01287 ↗
48. On the enhancement of ethanol sensing by CuO modified SnO2 nanoparticles using fiber-optic sensor10.1016/j.snb.2012.04.067 ↗
49. Antibacterial activities of novel nanocomposite biofilms of chitosan/phosphoramide/Ag NPs10.1002/pc.22960 ↗
50. 2,3J(P,X) [X=H, C] coupling constants dependency on the ring size, hybridization and substituents in new diazaphospholes and diazaphosphorinanes, NMR and X-ray crystallography studies10.1016/j.poly.2006.09.092 ↗
51. Hybrid reduced graphene oxide/TiO2/graphitic carbon nitride composites with improved photocatalytic activity for organic pollutant degradation10.1007/s00339-018-1933-6 ↗
52. A stable, efficient and reusable CdS–SnO2 heterostructured photocatalyst for the mineralization of Acid Violet 7 dye10.1016/j.apcata.2015.02.035 ↗
53. Al3+ doping into TiO2 photoanodes improved the performances of amine anchored CdS quantum dot sensitized solar cells10.1016/j.materresbull.2017.10.008 ↗
54. Revisit of the band gaps of rutile SnO2 and TiO2: a first-principles study10.1088/1674-4926/40/9/092101 ↗
55. Computational studies on the doped graphene quantum dots as potential carriers in drug delivery systems for isoniazid drug10.1007/s11224-018-1129-x ↗
56. Phosphate functionalized (4,4)-armchair CNTs as novel drug delivery systems for alendronate and etidronate anti-osteoporosis drugs10.1016/j.jmgm.2017.06.021 ↗
57. Synthesis, spectroscopic study, X-ray crystallography and ab initio calculations of the two new phosphoramidates: C6H5OP(O)(NHC6H11)2 and [N(CH3)(C6H11)]P(O)(2-C5H4N-NH)210.1016/j.molstruc.2007.03.047 ↗
58. Quantum dot sensitized solar cells fabricated by means of a novel inorganic spinel nanoparticle10.1016/j.apsusc.2018.02.022 ↗
59. Soluble tetratriphenylamine Zn phthalocyanine as hole transporting material for perovskite solar cells10.1016/j.electacta.2016.11.052 ↗
60. Fullerene derivative with a branched alkyl chain exhibits enhanced charge extraction and stability in inverted planar perovskite solar cells10.1039/C7NJ04978A ↗
61. Mixed Halide Perovskite Solar Cells: Progress and Challenges10.1080/10408436.2018.1549976 ↗
62. Quaternary quantum dots with gradient valence band for all-inorganic perovskite solar cells10.1016/j.jcis.2019.04.052 ↗
63. La-doped SnO2 as ETL for efficient planar-structure hybrid perovskite solar cells10.1016/j.orgel.2019.03.053 ↗
64. Boosted performances of mesoscopic perovskite solar cells using LaFeO3 inorganic perovskite nanomaterial10.1016/j.jelechem.2022.116376 ↗
65. CuInS2 quantum dots coated with CdS as high-performance sensitizers for TiO2 electrodes in photoelectrochemical cells10.1039/c0jm04276e ↗