journal article·2017-03

Improvement of stability of n-type super growth CNTs by hybridization with polymer for organic hybrid thermoelectrics

Keisuke Oshima, Yuki Yanagawa, Hitoshi Asano, Yukihide Shiraishi, Naoki Toshima

Synthetic Metals· Volume 225
Publisher page

Abstract

Abstract In order to fabricate effective Π-form thermoelectric devices both positive-type (p-type) and negative-type (n-type) semiconductors are expected to be used for the fabrication. There are a few reports on n-type organic thermoelectric materials and they are usually unstable in air. Here, we report the considerable stabilization of n-type carbon nanotubes/hydrazine hybrid films by mixing a common polymer, poly(vinyl chloride) (PVC) and poly(vinylidene difluoride) (PVDF). The n-type carbon nanotubes were synthesized by dispersion of super growth carbon nanotubes (SG-CNTs) into hydrazine hydrate in NMP ( N -methyl-2-pyrrolidone). The SG-CNT/Hydrazine/PVC hybrid films were fabricated by a simple method to drop-cast the mixtures on a glass substrate. To evaluate the air durability of SG-CNT/Hydrazine/PVC hybrid film, the samples were kept in air and the temporal change of the thermoelectric properties in air was measured. After 150 min Seebeck coefficients of n-type SG-CNT without polymer changed from −5.0 μV K −1 to 7.0 μV K −1 . On the other hand, the SG-CNT/Hydrazine/PVC hybrid films were rather stable in air and kept negative Seebeck coefficient even after 28 days.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Thermal properties of materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Recent progress of organic and hybrid thermoelectric materials
2. Goldsmid · 1964
3. New directions for low-dimensional thermoelectric materials10.1002/adma.200600527 ↗
4. Thermoelectrics: direct solar thermal energy conversion10.1557/mrs2008.73 ↗
5. Preparation and characterization of nanomaterials of tellurium bismuth, and bismuth telluride10.1246/bcsj.80.208 ↗
6. Towards high-performance polymer-based thermoelectric materials10.1039/c3ee24193a ↗
7. Organic thermoelectric materials: emerging green energy materials converting heat to electricity directly and efficiently10.1002/adma.201305371 ↗
8. Solution processed organic thermoelectrics: towards flexible thermoelectric modules10.1039/C4EE03297G ↗
9. Correlation of Seebeck coefficient and electric conductivity in polyaniline and polypyrrole10.1063/1.367119 ↗
10. Conductive polymers as a new type of thermoelectric material10.1002/1521-3900(200208)186:1<81::AID-MASY81>3.0.CO;2-S ↗
11. Thermoelectric figure-of-merit of iodine-doped copolymer of phenylenevinylene with dialkoxyphenylenevinylene10.1016/j.synthmet.2007.05.003 ↗
12. Optimization of the thermoelectric figure of merit in the conducting polymer poly(3,4-ethylenedioxythiophene)10.1038/nmat3012 ↗
13. Engineered doping of organic semi- conductors for enhanced thermoelectric efficiency10.1038/nmat3635 ↗
14. Recent progress on PEDOT-based thermoelectric materials10.3390/ma8020732 ↗
15. Light-weight flexible carbon nanotube based organic composites with large thermoelectric power factors10.1021/nn202868a ↗
16. Systematic conductivity behavior in conducting polymers: effects of heterogeneous disorder10.1002/1521-4095(200107)13:12/13<927::AID-ADMA927>3.0.CO;2-B ↗
17. Electronic and thermoelectric properties of polyaniline organic semiconductor and electrical characterization of Al/PANI MIS diode10.1021/jp0653050 ↗
18. Thermoelectric properties of conducting polymers: the case of poly(3-hexylthiophene)10.1103/PhysRevB.82.115454 ↗
19. Use of a 1H-benzoimidazole derivative as an n-type dopant and to enable air-stable solution-processed n-channel organic thin-film transistors10.1021/ja103173m ↗
20. Organic thermoelectric materials and devices based on p- and n-type poly(metal 1,1,2,2-ethenetetrathiolate)s10.1002/adma.201104305 ↗
21. Systematic conversion of single walled carbon nanotubes into n-type thermoelectric materials by molecular dopants10.1038/srep03344 ↗
22. Simple salt-coordinated n-type nanocarbon materials stable in air10.1002/adfm.201600179 ↗
23. Development of n-type cobaltocene- encapsulated carbon nanotubes with remarkable thermoelectric property10.1038/srep07951 ↗
24. Novel hybrid organic thermoelectric materials: three-component hybrid films consisting of a nanoparticle polymer complex, carbon nanotubes, and vinyl polymer10.1002/adma.201405463 ↗
25. Development of ethenetetrathiolate hybrid thermoelectric materials consisting of cellulose acetate and semiconductor nanomaterials10.7567/JJAP.55.02BB02 ↗
26. Effect of quantity of polymer on catalysis and superstructure size of polymer-protected Pt nanoclusters10.1016/S0020-1693(00)00015-3 ↗
27. Oxidation of ethylene catalyzed by colloidal dispersions of poly(sodium acrylate)-protected silver nanoclusters10.1016/S0927-7757(00)00417-9 ↗
28. Zirconia nanocolloids having a nanospace of poly(cyclodextrin): Preparation and application to liquid crystal devices10.1166/jnn.2014.8486 ↗
29. Dispersion of carbon nanotubes by poly(Ni-ethenetetrathiolate) for organic thermoelectric hybrid materials10.7567/JJAP.55.02BB07 ↗