Alternative Type Two-Dimensional–Three-Dimensional Lead Halide Perovskite with Inorganic Sodium Ions as a Spacer for High-Performance Light-Emitting Diodes

Two-dimensional (2D) lead halide perovskites with long-chain ammonium halides display high photoluminescence quantum yields (PLQYs), because of their size and dielectric confinement, which hold promise for a high-efficiency and low-cost light-emitting diode (LED). However, the presence of an insulating organic long-chain spacer cation (L) dramatically deteriorates the charge transport properties along the out-of-plane nanoplatelet direction or adjacent nanocrystals, which would limit the device performance of the LED. To overcome this issue, we successfully incorporate small alkaline ions such as sodium (Na+) to replace the long organic molecule. Grazing incidence X-ray diffraction measurements verify 2D layer formation with a preferred crystallite orientation. In addition, the incorporated sodium salt also generates amorphous sodium lead bromide (NaPbBr3) in perovskite as spacers to form a nanocrystal-like halide perovskite film. The PLQY is dramatically improved in the sodium-incorporated film because of its enhanced photoluminescence lifetime. Upon incorporation of a low concentration of an organic additive, this two-dimensional–three-dimensional (2D–3D) perovskite can achieve a compact and uniform film. Therefore, a 2D–3D perovskite achieves a high external quantum efficiency of 15.9% with good operational stability. We develop a type of 2D–3D halide perovskite with various inorganic ions as spacers for promising high-performance optoelectronic devices.