Quantum Dot-Based Three-Stack Tandem Near-Infrared-to-Visible Optoelectric Upconversion Devices

Quantum dots (QDs) exhibit size-tunable optical properties, making them suitable for efficient light-sensing and light-emitting devices. Tandem devices that can convert near-infrared (NIR) to visible (Vis) signals can be fabricated by integrating an NIR-sensing QD device with a Vis electroluminescence (EL) QD device. However, these devices require delicate control of the QD layer during processing to prevent damage to the predeposited QD layers in tandem devices during the subsequent deposition of other functional layers. This has restricted attainable device structures for QD-based upconversion devices. Herein, we present a modular approach for fabricating QD-based optoelectric upconversion devices. This approach involves using NIR QD-absorbing (Abs) and Vis QD-EL units as building modules, both of which feature cross-linked functional layers that exhibit structural tolerance to dissolution during subsequent solution-based processes. Tandem devices are fabricated in both normal (EL unit on Abs unit) and inverted (Abs unit on EL unit) structures using the same set of NIR QD-Abs and Vis QD-EL units stacked in opposite sequences. The tandem device in the normal structure exhibits a high NIR photon-to-Vis-photon conversion efficiency of up to 1.9% in a practical transmissive mode. By extending our modular approach, we also demonstrate a three-stack tandem device that incorporates a single NIR-absorbing unit coupled with two EL units, achieving an even higher conversion efficiency of up to 3.2%.