journal article·2009-02

Photovoltaic effect in arylenevinylene-co-pyrrolenevinylene (AVPV)

Ankur Solanki, Ashish Gupta, S. Sundar Kumar Iyer, Ashish Garg

Publisher page

Abstract

Abstract Arylenevinylene-co-pyrrolenevinylene (AVPV) is a promising candidate amongst the group of new photovoltaic materials. It is a low band gap organic material with a band gap of 1.84 eV and absorbs sunlight in 300–700 nm range. In this paper, we demonstrate the photovoltaic effect in an organic bulk heterojunction photovoltaic device based on the blend of AVPV as an electron donor and [6,6]-phenyl-C61 butyric acid methyl ester (PCBM) as the acceptor. The short-circuit current density of the device was of the order of 0.55 μA cm−2 with an open-circuit voltage of 0.7 V, measured under 1 sun illumination of AM 1.5 through a calibrated solar simulator. Fill factor was estimated to be 12%. Further, the tests conducted after 2 weeks showed that short-circuit current was 0.21 μA cm−2 and open-circuit voltage was 0.5 V with a fill factor of 9.8%, suggesting the possibility of stable AVPV-based organic solar cell (OSC).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Organic solar cells: a review10.1016/0379-6787(83)90039-X ↗
2. The photoconversion mechanism of excitonic solar cells10.1557/mrs2005.3 ↗
3. A brief history of the development of organic and polymeric photovoltaics10.1016/j.solmat.2004.02.021 ↗
4. Device physics of polymer: fullerene bulk heterojunction solar cells10.1002/adma.200601093 ↗
5. Organic solar cells: an overview10.1557/JMR.2004.0252 ↗
6. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
7. Processable low band gap n-conjugated polymer, poly(isothianaphthene): its synthesis and reaction mechanism10.1351/pac199567121983 ↗
8. Low band gap polymers for organic photovoltaics10.1016/j.solmat.2007.01.015 ↗
9. Low band gap polymer bulk heterojunction solar cells10.1016/j.cplett.2006.03.027 ↗
10. Low band gap donor–acceptor conjugated polymers toward organic solar cells applications10.1021/ma061760i ↗
11. Recombination and loss analysis in polythiophene based bulk heterojunction photodetectors10.1063/1.1521244 ↗
12. Efficient polymer-based interpenetrated network photovoltaic cells10.1063/1.1669065 ↗
13. 2.5% efficient organic plastic solar cells10.1063/1.1345834 ↗
14. Low-band gap poly(di-2-thienylthienopyrazine): fullerene solar cells10.1063/1.2195897 ↗
15. Flexible, long-lived, large-area, organic solar cells10.1016/j.solmat.2006.10.013 ↗
16. Flexible conjugated polymer photovoltaic cells with controlled heterojunctions fabricated using nanoimprint lithography10.1063/1.2715036 ↗
17. Modified buffer layers for polymer photovoltaic devices10.1063/1.2437703 ↗
18. Lifetimes of organic photovoltaics: design and synthesis of single oligomer molecules in order to study chemical degradation mechanisms10.1016/j.solmat.2006.04.004 ↗
19. Lifetimes of organic photovoltaics: combining chemical and physical characterisation techniques to study degradation mechanisms10.1016/j.solmat.2006.04.009 ↗
20. Stability of polymer light emitting diodes10.1016/S0165-5817(98)00021-7 ↗
21. Morphology and thermal stability of the active layer in poly(p-phenylenevinylene)/methanofullerene plastic photovoltaic devices10.1021/ma035620+ ↗
22. Patterns of efficiency and degradation of composite polymer solar cells10.1016/j.solmat.2004.02.028 ↗
23. Synthesis and electropolymerisation of 3′,4′-bis(alkylsulfanyl)terthiophenes and the significance of the fused dithiin ring in 2,5-dithienyl-3,4-ethylenedithiothiophene (DT-EDTT)10.1039/b109017h ↗
24. Air stable polymer photovoltaics based on a process free from vacuum steps and fullerenes10.1016/j.solmat.2008.01.013 ↗
25. Stabilization of the nanomorphology of polymer–fullerene ‘‘bulk heterojunction’’ blends using a novel polymerizable fullerene derivative10.1039/b505361g ↗
26. Yang · Nano Lett. · 2005 · 5 · 57910.1021/nl048120i ↗
27. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
28. Synthesis, photophysical, and electroluminescent properties of arylenevinylenes-co-pyrrolenevinylenes derived from divinylaryl bridged bispyrroles10.1021/ma070116g ↗
29. Improvement of organic solar cell performances using a zinc oxide anode coated by an ultrathin metallic layer10.1063/1.2888176 ↗