Battery effects in organic photovoltaics based on polybithiophene
Source abstract
Abstract
Abstract Homopolymer photovoltaic devices based on thin films of polybithiophene, prepared by direct electrodeposition onto transparent fluorine-doped tin oxide electrodes followed by evaporation of an aluminium electrode to complete the device, were reported by Leguenza et al. [J. Solid State Electrochem. 11 (2007) 577.] to exhibit very high open-circuit voltages ( V oc ) of up to 2 V at a very low light intensity of 6.6 W m −2 . In this letter, we report our attempts to reproduce the results. We achieved V oc 's⩽0.8 V under a light intensity of 23 W m −2 . We also observed an unexpected V oc in the dark suggesting that the high voltages previously reported might be attributed to the polarization of the polybithiophene layer, which lead to a battery effect in the dark and therefore not entirely a photovoltaic effect. We conclude that more work is needed before this observation can conceivably be applied in organic photovoltaics. Most notably, the application of this polarization effect depends on the demonstration of the high V oc under high luminous intensities (i.e. >200 W m −2 ) and at high current densities (>1 mA cm −2 ) which has not been achieved yet.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.