Monte-Carlo simulation of the cofiring process in polycrystalline silicon solar cells: Effects of material heterogeneity and thickness uncertainties
Source abstract
Abstract
Abstract During production, solar cells undergo significant thermomechanical loadings that lead to permanent deformations before being laminated in photovoltaic (PV) modules. One of these thermomechanical production processes is cofiring. In this work, the permanent deformation of solar cells after the cofiring process was investigated. The experimental measurements revealed a great scatter in the measured deflection at the deformed edges of the polycrystalline silicon solar cells after the cofiring process. A finite element (FE) framework was developed to investigate factors contributing to this scatter. The framework predicts the multistable response of the solar cell to the thermomechanical loading of the cofiring process. It accounts for the uncertainties arising from the heterogeneity of the polycrystalline silicon layer (grain orientations and non-uniform grain sizes) and uncertainties regarding the layer thicknesses of the silicon and aluminum paste. Employing the developed framework in a Monte-Carlo simulation the relative significance of the mentioned uncertainties on the deflection at the solar cell edge after the cofiring process was analyzed. Numerical results for a commercially produced polycrystalline silicon solar cell were compared with an analytical model and validated with experimental measurements.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Advanced Surface Polishing Techniques · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. The risk of power loss in crystalline silicon based photovoltaic modules due to micro-cracks10.1016/j.solmat.2010.10.034 ↗
2. Impact of cracks in multicrystalline silicon solar cells on PV module power – a simulation study based on field data10.1109/JPHOTOV.2015.2471076 ↗
3. Model of cracked solar cell metallization leading to permanent module power loss10.1109/JPHOTOV.2015.2487829 ↗
4. Mechanical investigations on metallization layouts of solar cells with respect to module reliability10.1016/j.egypro.2013.07.308 ↗
5. A. Gabor, M. Ralli, S. Montminy, L. Alegria, C. Bordonaro, J. Woods, L. Felton, Soldering induced damage to thin solar cells and detection of cracked cells in modules, in: Proceedings of the 21st European Photovoltaic Solar Energy Conference, Dresden, Germany, 2008.
6. S. Narasinha, A. Rohatgi, Optimized aluminum back surface field techniques for silicon solar cells, in: Conference Record Proceedings of the Twenty Sixth IEEE Photovoltaic Specialists Conference, 1997: pp. 63–66. 〈http://dx.doi.org/10.1109/PVSC.1997.653925〉.10.1109/PVSC.1997.653925 ↗
7. T. van Amstel, V. Popovich, I.J. Bennett, A multiscale model of the aluminium layer at the rear side of a solar cell, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference, Hamburg, Germany: pp. 1179–1185. 〈http://dx.doi.org/10.4229/24thEUPVSEC〉. 2009-2DO.3.6, 2009.
8. S. Kim, S. Sridharan, C. Khadilkar, A. Shaikh, Aluminum pastes (lead-free/low-bow) for thin wafers, in: Conference Record Proceedings of the Thirty-First IEEE Photovoltaic Specialists Conference: pp. 1100–1102. 〈http://dx.doi.org/10.1109/PVSC.2005.1488327〉, 2005.10.1109/PVSC.2005.1488327 ↗
9. A. Schneider, C. Gerhards, P. Fath, E. Bucher, R.J.S. Young, J.A. Raby, A.F. Carroll, Bow reducing factors for thin screenprinted MC-Si solar cells with Al BSF, in: Conference Record Proceedings of the Twenty-Ninth IEEE Photovoltaic Specialists Conference: pp. 336–339. 〈http://dx.doi.org/10.1109/PVSC.2002.1190527〉, 2002.10.1109/PVSC.2002.1190527 ↗
10. Bow in screen-printed back-contact industrial silicon solar cells10.1016/j.solmat.2007.04.010 ↗
11. C. Kohn, T. Faber, R. Kübler, J. Beinert, G. Kleer, F. Clement, D. Erath, I. Reis, F. Martin, A. Müller, Analyses of warpage effects induced by passivation and electrode coatings in silicon solar cells, in: Proceedings of the 22nd European Photovoltaic Solar Energy Conference, Milan, Italy: pp. 1270–1273, 2007.
12. Loss of bifurcation and multiple shapes of thin [0/90] unsymmetric composite plates subject to thermal stress10.1016/S0266-3538(03)00213-6 ↗
13. Analysis of thermally induced multistable composites10.1016/j.ijsolstr.2007.08.031 ↗
14. A. Haldar, J. Reinoso, E. Jansen, R. Rolfes, Thermally induced multistable configurations of variable stiffness composite plates: Semi-analytical and finite element investigation, Composite Structures. (n.d.). 〈http://dx.doi.org/10.1016/j.compstruct.2017.02.014〉.10.1016/j.compstruct.2017.02.014 ↗
15. F. Huster, Aluminum-Back Surface Field: Bow Investigation and Elimination, in: Proceedings of the 20th European Photovoltaic Solar Energy Conference, Barcelona, Spain: pp. 635–638, 2005.
16. T. van Amstel, I.J. Bennett, Towards a better understanding of the thermo-mechanical behavior of H-pattern cells during metallization, in: Proceedings of the 33rd IEEE Photovoltaic Specialists Conference, 2008: pp. 1–5. 〈http://dx.doi.org/10.1109/PVSC.2008.4922691〉.10.1109/PVSC.2008.4922691 ↗
17. J. Reinoso, R. Nabavi, R. Rolfes, E.L. Jansen, Thermo-mechanical bowing of silicon solar cells during the production procedure, in: Proceedings of the 6th ECCOMAS Conference on Smart Structures and Materials, Politecnico di Torino, Italy, 2013.
18. R. Nabavi, J. Reinoso, E. Jansen, R. Rolfes, Thermo-mechanical aspects of the co-firing process in multi-crystalline silicon solar cells, in: Proceedings of the 28th European Photovoltaic Solar Energy Conference, Paris, France, 2013: pp. 1576–1582. 〈http://dx.doi.org/10.4229/28thEUPVSEC. 2013-2CV.3.32〉.
19. Properties of crystalline silicon
20. Touloukian · 1975
21. Nasser · 1993
22. Jones · 1999
23. Bhagavantam · 1966
24. Eitner · 2011
25. Young’s modulus, shear modulus, and Poisson's ratio in silicon and germanium10.1063/1.1713863 ↗
26. What is the Young's modulus of silicon?10.1109/JMEMS.2009.2039697 ↗
27. 1.16 – crystalline silicon solar cells: state-of-the-art and future developments
28. Kumar · 1992
29. Monte Carlo simulation of effective elastic constants of polycrystalline thin films10.1016/S1359-6454(96)00366-7 ↗
30. Overall elastic properties of polysilicon films: a statistical investigation of the effects of polycrystal morphology10.1615/IntJMultCompEng.v9.i3.50 ↗
31. Stiffness and fracture analysis of photovoltaic grade silicon plates10.1016/j.ijsolstr.2016.07.013 ↗
32. Overall elastic domain of thin polysilicon films10.1016/j.commatsci.2011.05.018 ↗
33. Polycrystal models for the analysis of intergranular crack growth in metallic materials10.1016/j.engfracmech.2009.07.006 ↗
34. Modelling inter- and transgranular fracture in piezoelectric polycrystals10.1016/j.engfracmech.2008.07.004 ↗
35. Grain level analysis of crack initiation and propagation in brittle materials10.1016/S1359-6454(01)00292-0 ↗
36. Monte carlo simulation of micro-cracking in polysilicon MEMS exposed to shocks10.1007/s10704-010-9531-4 ↗
37. Dependency of effective modulus of polycrystalline aggregates on macro-geometric configuration10.1142/S1758825112500317 ↗
38. Voronoi diagrams – a survey of a fundamental geometric data structure10.1145/116873.116880 ↗
39. The Quickhull algorithm for convex hulls10.1145/235815.235821 ↗
40. W. Voigt, Lehrbuch der Kristallphysik (mit Ausschluss der Kristalloptik), B. G. Teubner, 1928.
41. A. Reuss, Berechnung der Fließgrenze von Mischkristallen auf Grund der Plastizitätsbedingung für Einkristalle. ZAMM – J. App. Math. Mech./ Z. Angew. Math. Mech. 9, pp. 49–58. 〈http://dx.doi.org/10.1002/zamm.19290090104〉, 1929.10.1002/zamm.19290090104 ↗
42. The elastic behaviour of a crystalline aggregate10.1088/0370-1298/65/5/307 ↗
43. F. Huster, Investigation of the alloying process of screen printed aluminium pastes for the BSF formation on silicon solar cells, in: Proceedings of the 20th European Photovoltaic Solar Energy Conference: pp. 1466–1469, 2005.
44. Bidiville · 2010
45. Mechanisms of wafer sawing and impact on wafer properties10.1002/pip.972 ↗
46. Mann · 2010
47. M. Pander, Mechanische Untersuchungen an Solarzellen in PV-Modulen mittels Finite-Elemente-Modellierung (Master Thesis), HTWK Leipzig, 2009.
48. Zienkiewicz · 1991
49. SMA-Induced Deformations In general Unsymmetric Laminates
50. Analysis of bi-metal thermostats10.1364/JOSA.11.000233 ↗
51. Hetnarski · 2008
52. Mechanical properties of liquid-phase-bonded copper-ceramic substrates10.1111/j.1151-2916.1982.tb10384.x ↗
53. Residual stresses in meta/ceramic bonded strips10.1111/j.1151-2916.1985.tb15316.x ↗
54. Micromechanical characterization of polysilicon films through On-chip tests
55. R. Mirzazadeh, S. Mariani, Assessment of micromechanically-induced uncertainties in the electromechanical response of MEMS devices, in: Proceedings of the 3rd International Electronic Conference on Sensors and Applications, Basel, Switzerland: pp. 15–30, 2016.10.3390/ecsa-3-S1001 ↗