Stabilization of PCBM domains in bulk heterojunctions using polystyrene-tethered fullerene
Source abstract
Abstract
Abstract The domain size of [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) in the bulk heterojunction (BHJ) of organic photovoltaic (OPV) devices is of great importance to the performance and lifetime of a device. This study focuses on the use of polystyrene-tethered fullerenes (PTFs) as an additive to reduce the initial domain size of PCBM as well as to mitigate the growth of these domains over time that typically results in decreased device efficiency. Films were prepared from a 1:1 mixture of P3HT:PCBM on silicon wafers to approximate a BHJ system. PTFs were added in concentrations ranging from 0 to 20%. The samples were then annealed at 150 °C for varying times ranging from 5 to 60 min and examined by SEM to determine the average PCBM domain sizes for each sample. As expected, the control sample containing no additive showed significant growth in the PCBM domains as the sample was annealed with a final average domain size of 290 μm 2 . However, addition of as little as 5% PTFs produced average PCBM domain sizes after 60 min of annealing of 28 μm 2 . Addition of 20% PTF resulted in an average PCBM domain size of 2 μm 2 . Photoluminescence spectroscopy (PL) studies were performed on the films to study their electrical properties and based on these encouraging results; devices containing these architectures were prepared. OPVs with PTFs showed an increased lifetime, and in some cases, an increase in efficiency over devices containing no PTF.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
2. Organic solar cells: an overview10.1557/JMR.2004.0252 ↗
3. High-efficiency organic solar cells based on end-functional-group-modified poly(3-hexylthiophene)10.1002/adma.200902803 ↗
4. Polymer–fullerene composite solar cells10.1002/anie.200702506 ↗
5. Small molecule organic semiconductors on the move: promises for future solar energy technology10.1002/anie.201102326 ↗
6. Improved thermal stability of bulk heterojunctions based on side-chain functionalized poly(3-alkylthiophene) copolymers and PCBM10.1016/j.solmat.2012.12.007 ↗
7. Enhancement of power conversion efficiency and long-term stability of P3HT/PCBM solar cells using C60 derivatives with thiophene units as surfactants10.1016/j.solmat.2011.07.037 ↗
8. [60]Fulleropyrrolidines bearing π-conjugated moiety for polymer solar cells: contribution of the chromophoric substituent on C60 to the photocurrent10.1021/am301773t ↗
9. Influence of new fullerene derivatives with fluorocarbon substituent on performance of polymer solar cells10.1016/j.phpro.2011.05.039 ↗
10. The effect of processing additive on aggregated fullerene derivatives in bulk-heterojunction polymer solar cells10.1016/j.orgel.2011.12.020 ↗
11. Improved power conversion efficiency of bulk heterojunction poly(3-hexylthiophene):PCBM photovoltaic devices using small molecule additive10.1016/j.solmat.2010.12.013 ↗
12. Toward the realization of a practical diketopyrrolopyrrole-based small molecule for improved efficiency in ternary BHJ solar cells10.1002/marc.201100643 ↗
13. The influence of additive property on performance of organic bulk heterojunction solar cells10.1007/s00289-012-0721-2 ↗
14. Manipulating regioregular poly(3-hexylthiophene): [6,6]-phenyl-C61-butyric acid methyl ester blends-route towards high efficiency polymer solar cells10.1039/b703075b ↗
15. Miscibility, crystallinity, and phase development in P3HT/PCBM solar cells: toward an enlightened understanding of device morphology and stability10.1021/jz2014902 ↗
16. A new model for the morphology of P3HT/PCBM organic photovoltaics from small-angle neutron scattering: rivers and streams10.1021/nn200744q ↗
17. Phase diagram of P3HT/PCBM blends and its implication for the stability of morphology10.1021/jp804151a ↗
18. Temperature-independent charge carrier photogeneration in P3HT−PCBM blends with different morphology10.1021/jp9119364 ↗
19. The effect of thermal treatment on the morphology and charge carrier dynamics in a polythiophene–fullerene bulk heterojunction10.1002/adfm.200400559 ↗
20. Manipulating the crystallization of methanofullerene thin films with polymer additives10.1002/macp.201200341 ↗
21. Competition between fullerene aggregation and poly(3-hexylthiophene) crystallization upon annealing of bulk heterojunction solar cells10.1021/nn2010816 ↗
22. P3HT/PCBM bulk heterojunction organic photovoltaics: correlating efficiency and morphology10.1021/nl103482n ↗
23. Femtosecond time-resolved fluorescence study of P3HT/PCBM blend films10.1021/jp912288p ↗
24. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
25. Stabilization of poly(3-hexylthiophene)/PCBM morphology by hydroxyl group end-functionalized P3HT and its application to polymer solar cells10.1016/j.orgel.2011.11.019 ↗
26. Thermally stable bulk heterojunction solar cells based on cross-linkable acrylate-functionalized polythiophene diblock copolymers10.1021/ma3020905 ↗
27. Enhanced photovoltaic performance of polymer solar cells by adding fullerene end-capped polyethylene glycol10.1039/c0jm04559d ↗
28. Synthesis of di- and tetra-adducts by addition of polystyrene macroradicals onto fullerene C6010.1002/pola.20201 ↗
29. Polymer-bound C6010.1021/ja00062a091 ↗
30. Clicking Fullerene with polymers: synthesis of [60]fullerene end-capped polystyrene10.1021/ma702345r ↗
31. Addition of azides to fullerene C60: synthesis of azafulleroids10.1021/ja00056a049 ↗
32. A simple and versatile method for the synthesis of C60 copolymers10.1021/ma00095a027 ↗
33. The solid-state mechanochemical reaction of fullerene C6010.1080/10641229909351365 ↗
34. K. Komatsu, kThe Mechanochemical Solid-State Reaction of Fullerenes, Topics in Current Chemistry 254 (2005) 185–206.10.1007/b100998 ↗
35. Controlled/living radical polymerization. halogen atom transfer radical polymerization promoted by a Cu(I)/Cu(II) redox process10.1021/ma00127a042 ↗
36. Synthesis of functional polystyrenes by atom transfer radical polymerization using protected and unprotected carboxylic acid initiators10.1021/ma990551d ↗
37. Flexible large area polymer solar cells based on poly(3-hexylthiophene)/fullerene
38. Fabrication and optimization of P3HT:PCBM organic photovoltaic devices10.1117/12.829178 ↗
39. Discrepancy of optimum ratio in bulk heterojunction photovoltaic devices: initial cell efficiency vs. long-term stability10.1021/am302185f ↗
40. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗