journal article·2011-12

Effect of blend composition in BisEH-PFDTBT:PC70BM solar cells

Anna Calabrese, Andrea Pellegrino, Riccardo Po, Alberto Savoini, Francesca Tinti, Nadia Camaioni

Publisher page

Abstract

The photovoltaic properties of bulk-heterojunction solar cells with an active layer made of an alternating fluorene copolymer, poly{[2,7-(9,9-bis-(2-ethylhexyl)-fluorene)]-alt-[5,5-(4,7-di-2'-thienyl-2,1,3-benzothiadiazole)]}, and [6,6]-phenyl-C-71-butyric acid methylester are investigated by varying the blend composition and the incident light power intensity. An efficient donor-acceptor intermixing is reached with donor to acceptor weight ratios of at least 1:3, while at lower acceptor content charge trapping effects are evidenced by the light intensity dependent study. Reverse bias analysis demonstrates that a major limiting factor for the performance of the investigated solar cells is represented by the poor ability of the generation of free charge carriers, attributed to the low hole mobility in the polymer phase.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
2. Polymers for roll-to-roll coated polymer solar cells10.1021/ma1015903 ↗
3. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
4. Manufacture, integration and demonstration of polymer solar cells in a lamp for the “Lighting Africa” initiative10.1039/b918441d ↗
5. Charge separation and photovoltaic conversion in polymer composites with internal donor–acceptor heterojunctions10.1063/1.359792 ↗
6. Efficient photodiodes from interpenetrating polymer networks10.1038/376498a0 ↗
7. Development of novel conjugated donor polymers for high-efficiency bulk-heterojunction photovoltaic devices10.1021/ar900061z ↗
8. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
9. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
10. For the bright future-bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
11. Synthesis of conjugated polymers for organic solar cell applications10.1021/cr900182s ↗
12. A weak donor–strong acceptor strategy to design ideal polymers for organic solar cells10.1021/am1000344 ↗
13. Molecular engineering of the band gap of pi-conjugated systems: facing technological applications10.1002/marc.200700345 ↗
14. Synthetic principles for bandgap control in linear pi-conjugated systems10.1021/cr950257t ↗
15. Design rules for donors in bulk-heterojunction solar cells—towards 10% energy-conversion efficiency10.1002/adma.200501717 ↗
16. Origin of the open circuit voltage of plastic solar cells10.1002/1616-3028(200110)11:5<374::AID-ADFM374>3.0.CO;2-W ↗
17. High-performance polymer solar cells of an alternating polyfluorene copolymer and a fullerene derivative10.1002/adma.200304150 ↗
18. Efficient polymer solar cells with thin active layers based on alternating polyfluorene copolymer/fullerene bulk heterojunctions10.1002/adma.200900510 ↗
19. Synthesis of thieno[3,4-b] pyrazine-based and 2,1,3-benzothiadiazole-based donor–acceptor copolymers and their application in photovoltaic devices10.1021/ma100039q ↗
20. Optical and electronic properties of fluorene/thiophene/benzothiadiazole pseudorandom copolymers for photovoltaic applications10.1007/s10853-011-5321-2 ↗
21. The values of Rs were evaluated from the dark J–V curves as Rs=(dV/dJ)V→∝.
22. Relating the morphology of poly(p-phenylene vinylene)/methanofullerene blends to solar-cell performance10.1002/adfm.200305049 ↗
23. Organic photovoltaics—Polymer-fullerene composite solar cells10.1002/anie.200702506 ↗
24. Investigation of annealing effects and film thickness dependence of polymer solar cells based on poly(3-hexylthiophene)10.1063/1.2008386 ↗
25. Two-dimensional electronic excitations in self-assembled conjugated polymer nanocrystals10.1126/science.287.5454.839 ↗
26. Organic photovoltaic devices produced from conjugated polymer/methanofullerene bulk heterojunctions10.1016/S0379-6779(00)01445-4 ↗
27. Space-charge limited photocurrent10.1103/PhysRevLett.94.126602 ↗
28. Origin of the reduced fill factor and photocurrent in MDMO-PPV:PCNEPV all-polymer solar cells10.1002/adfm.200601110 ↗
29. Photocurrent generation in polymer-fullerene bulk heterojunctions10.1103/PhysRevLett.93.216601 ↗
30. Electron transport in a methanofullere10.1002/adfm.200390004 ↗
31. Charge transport and photocurrent generation in poly (3-hexylthiophene): methanofullerene bulk-heterojunction solar cells10.1002/adfm.200500420 ↗
32. Bimolecular recombination in polymer/fullerene bulk heterojunction solar cells10.1063/1.2170424 ↗
33. Optimum charge carrier mobility in organic solar cells10.1063/1.2711534 ↗