Source materials grain size effect on electrode microstructure and its effect on conventional bulk hetero-junction photovoltaics
Source abstract
Abstract
Abstract In this work, the effect of silver cathode on the polymer diode and organic photovoltaic device (OPV) performance was investigated. The electron collecting contacts in diode and OPV device have been deposited from both silver pellet and nanoparticles form. Diode was fabricated by sandwiching poly(3-hexylthiophane-2,5-diyl) between ITO and Ag electrodes. It is observed that diode fabricated using Ag nanoparticles showed significant current density improvement. The enhancement in diode performance was studied by C-V measurements. Further, OPV cells fabricated using Ag nanoparticles showed improvement in current density which results in improved power conversion efficiency (PCE). The observed performance enhancements in diode and OPV device have been correlated with electrode microstructure and its interface properties. The performance enhancement in diode and OPV cells is evaluated by various electrical parameters such carrier concentration ( N ), density of trap states, trap distribution width (ω) and current density. These data indicate that the electrode grain size matching with the semiconductor morphology across metal/semiconductor interface is more critical for better charge transfer. Matching the roughness of the interface across the junction by use of appropriate starting material particle/grain size can help in extracting the maximum performance of an organic device.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. A quantitative study of the formation of PCBM clusters upon thermal annealing of P3HT/PCBM bulk heterojunction solar cell10.1016/j.solmat.2013.05.011 ↗
2. Grain-orientation induced work function variation in nanoscale metal-gate transistors #x2014; Part II: implications for process, device, and circuit design10.1109/TED.2010.2063270 ↗
3. Grain-orientation induced work function variation in nanoscale metal-gate transistors #x2014; Part I: modeling, analysis, and experimental validation10.1109/TED.2010.2063191 ↗
4. Anisotropy of the electronic work function of metals10.1103/PhysRev.60.661 ↗
5. Novel thiophene derivative hybrid composite solar cells10.1016/j.solmat.2011.09.021 ↗
6. Effects of active layer thickness and thermal annealing on polythiophene: fullerene bulk heterojunction photovoltaic devices10.1063/1.3474654 ↗
7. Morphology of thin silver film grown by dc sputtering on Si(001)10.1088/0022-3727/31/23/001 ↗
8. Study and comparison of deposition rates, grain size of Ag and Cu thin films with respect to sputtering parameters, and annealing temperature10.1088/1742-6596/61/1/261 ↗
9. Cohesion and device reliability in organic bulk heterojunction photovoltaic cells10.1016/j.solmat.2011.11.035 ↗
10. Film stresses and electrode buckling in organic solar cells10.1016/j.solmat.2012.04.003 ↗
11. Approach for preparing single-layer molecularly doped electroluminescent polymer thin films10.1021/ma9807771 ↗
12. S-shaped current-voltage characteristics of organic solar devices10.1103/PhysRevB.82.115306 ↗
13. The base layer effect on the d.c. conductivity and structure of direct current magnetron sputtered thin films of silver10.1016/S0040-6090(00)01341-9 ↗
14. Characterization of thin films produced by the thermal evaporation of silver oxide10.1088/0022-3727/40/9/027 ↗
15. The Scherrer formula for X-Ray particle size determination10.1103/PhysRev.56.978 ↗
16. Line broadening analysis using integral breadth methods: a critical review10.1107/S0021889804004583 ↗
17. The effect of dislocation contrast on x-ray line broadening: a new approach to line profile analysis10.1063/1.117951 ↗
18. Size-dependent melting temperature of individual nanometer-sized metallic clusters10.1103/PhysRevB.42.8548 ↗
19. K.-S. Moon, H. Dong, S. Pothukuchi, Y. Li, C.P. Wong, Nano metal particles for low temperature interconnect technology, in: Electronic Components and Technology Conference 2004 Proceedings 54th, vol. 2, 2004, p. 1983–1988. 〈http://doi.org/10.1109/ECTC.2004.1320399〉.10.1109/ECTC.2004.1320399 ↗
20. Electrical resistivity of silver films10.1103/PhysRev.166.652 ↗
21. Surface roughness and conductivity of thin Ag films10.1103/PhysRevB.49.4858 ↗
22. Defect states and their energetic position and distribution in organic molecular semiconductors10.1063/1.4801636 ↗
23. Effect of light induced degradation on electrical transport and charge extraction in polythiophene:Fullerene (P3HT:PCBM) solar cells10.1016/j.solmat.2013.09.010 ↗
24. S.M. Sze, Physics of Semiconductor Devices, n.d. 〈http://archive.org/details/PhysicsOfSemiconductorDevices〉 (Accessed 12 October 2014).
25. High-efficiency polymer solar cells enhanced by solvent treatment10.1002/adma.201204306 ↗
26. Carrier recombination losses in inverted polymer: Fullerene solar cells with ZnO hole-blocking layer from transient photovoltage and impedance spectroscopy techniques10.1063/1.3561437 ↗
27. Trap-induced losses in hybrid photovoltaics10.1021/nn501185h ↗
28. Understanding Mott-Schottky measurements under illumination in organic bulk heterojunction solar cells10.1103/PhysRevApplied.7.034018 ↗
29. On the identification of deeper defect levels in organic photovoltaic devices, J. Appl. Phys. vol. 114, 2013, p. 064509. 〈http://doi.org/10.1063/1.4818324〉.10.1063/1.4818324 ↗
30. Sensitivity of the Mott–Schottky analysis in organic solar cells10.1021/jp300397f ↗
31. The identification, characterization and mitigation of defect states in organic photovoltaic devices: a review and outlook10.1039/c3ee41860j ↗
32. Elucidating operating modes of bulk-heterojunction solar cells from impedance spectroscopy analysis10.1021/jz302064z ↗