Durability of encapsulated Cu(In,Ga)Se2 solar cells using high barrier flexible front sheet under damp heat conditions testing
Source abstract
Abstract
Cu(In,Ga)Se 2 (CIGSe) thin-film solar cells, known for their high efficiency and flexibility, are rapidly used in a variety of applications. Glass top cover encapsulation is a widely recognized method for protecting solar cells from moisture, oxygen, and mechanical stress. However, this approach increases the module's weight, and the rigidity of glass also limits the flexibility of the modules. This study investigates the long-term stability and performance of encapsulated CIGSe cells under the damp heat (DH) test as specified in the IEC 61215-2 standard. The CIGSe device was encapsulated with a lamination-based encapsulation structure using a high-barrier flexible polyethylene terephthalate (PET) front sheet and exposed to 85 o C/85% relative humidity (RH), which was carried out for 2448h. The effectiveness of forward bias voltage during the DH test was investigated by comparing two groups of cells: one group was connected with bias voltage at voltage maximum power point (Vmpp) value, and another was kept under open-circuit condition. Under both conditions, CIGSe solar cells passed the standard test by maintaining over 95% of their initial efficiency after 1000h of DH test, demonstrating the effectiveness of the encapsulation method that facilitates prolonged environmental stress. The cells with a forward bias voltage applied retained higher efficiencies with 99% and 98% of their initial efficiencies after 1008h and 2448h of the DH test, respectively. These results provide substantial information for building durable photovoltaic modules capable of withstanding harsh climatic conditions, thereby contributing to the advancement of sustainable solar energy technologies.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Silicon and Solar Cell Technologies · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. High-concentration silver alloying and steep back-contact gallium grading enabling copper indium gallium selenide solar cell with 23.6% efficiency10.1038/s41560-024-01472-3 ↗
2. Cd-Free Cu(In,Ga)(Se,S)2 thin-film solar cell with record efficiency of 23.3510.1109/JPHOTOV.2019.2937218 ↗
3. Modeling of the nominal operating cell temperature based on outdoor weathering10.1016/j.solmat.2011.01.020 ↗
4. Degradation mechanism due to water ingress effect on the top contact of Cu(In,Ga)Se2 solar cells10.3390/en13174545 ↗
5. Igalson · 2002
6. Failure analysis of Cu(In,Ga)Se2 photovoltaic modules: degradation mechanism of Cu(In,Ga)Se2 solar cells under harsh environmental conditions10.1002/pip.2497 ↗
7. Degradation mechanism in Cu(In,Ga)Se2 material and solar cells due to moisture and heat treatment of the absorber layer10.1109/JPHOTOV.2019.2912707 ↗
8. Impact of water ingress on molybdenum thin films and its effect on Cu(In,Ga)Se2 solar cells10.1109/JPHOTOV.2019.2959947 ↗
9. Review on the developments in copper indium gallium diselenide (CIGSe)-based thin film photovoltaic devices10.1007/s10854-024-12658-6 ↗
10. Effects of mechanical damage and temperature on the electrical performance of CIGS thin-film solar cells10.1109/JPHOTOV.2018.2858557 ↗
11. Stability of Cu(In,Ga)Se2 solar cells: a literature review10.1016/j.solener.2016.04.010 ↗
12. Degradation of interfacial adhesion strength within photovoltaic mini-modules during damp-heat exposure10.1002/pip.2460 ↗
13. Wohlgemuth
14. Evaluation and modeling of edge-seal materials for photovoltaic applications
15. Enhanced moisture barrier performance for ALD-encapsulated OLEDs by introducing an organic protective layer10.1039/C7TC00903H ↗
16. Effective module level encapsulation of CIGS solar cells with Al2O3 thin film grown by atomic layer deposition effective module level encapsulation of CIGS solar cells with Al2O3 thin film grown by atomic layer deposition10.1016/j.solmat.2020.110914 ↗
17. Sustainable PV module design—review of state-of-the-art encapsulation methods
18. Encapsulation of PV modules using ethylene vinyl acetate copolymer as the encapsulant10.1002/mren.201400065 ↗
19. Study of ethylene vinyl acetate (EVA) films used in photovoltaic modules10.21272/jnep.10(5).05043 ↗
20. Effect of UV aging on degradation of ethylene-vinyl acetate (EVA) as encapsulant in photovoltaic (PV) modules
21. Ethylene-vinyl acetate potential problems for photovoltaic packaging
22. Newly developed thermoplastic polyolefin encapsulant–A potential candidate for crystalline silicon photovoltaic modules encapsulation10.1016/j.solener.2019.11.018 ↗
23. Characterization of customized encapsulant polyvinyl butyral used in the solar industry and its impact on the environment10.3390/en13205391 ↗
24. Changes of solar cell parameters during damp-heat exposure10.1002/pip.2793 ↗
25. Acetic acid production and glass transition concerns with ethylene-vinyl acetate used in photovoltaic devices10.1016/j.solmat.2006.10.009 ↗
26. Encapsulating perovskite solar cells to withstand damp heat and thermal cycling10.1039/C8SE00250A ↗
27. PV module durability testing under high voltage biased damp heat conditions
28. Analysis of accelerated damp heat test for degradation analysis and recovery method of photovoltaic module10.1002/ente.202200707 ↗
29. Transparent flexible ultra-low permeability encapsulation film: fusible glass fired on heat-resistant polyimide membrane
30. ETFE and its role in the fabrication of lightweight c-Si solar modules10.1109/JPHOTOV.2023.3242212 ↗
31. Development of lightweight and flexible crystalline silicon solar cell modules with PET film cover for high reliability in high temperature and humidity conditions10.1016/j.solmat.2023.112541 ↗
32. Perovskite solar cell modules: understanding the device degradation via damp heat testing10.1016/j.solener.2024.113174 ↗
33. Exploring suitable damp heat and potential induced degradation test procedures for Cu(In,Ga)(S,Se) photovoltaic modules
34. Effects of long-term heat-light soaking on Cu(In,Ga)Se2 solar cells with KF postdeposition treatment
35. Encapsulation of commercial and emerging solar cells with focus on perovskite solar cells10.1016/j.solener.2022.03.060 ↗
36. Pern
37. Inherent UV-blocking capability of polyurethane prepared from vegetable oil for solar cell encapsulation10.1007/s10853-024-09558-9 ↗
38. The transition metal dichalcogenides discussion and interpretation of the observed optical, electrical and structural properties10.1080/00018736900101307 ↗
39. Formation and characterisation of MoSe2 for Cu(In,Ga)Se2 based solar cells10.1016/j.tsf.2004.11.098 ↗
40. Electrical properties of CIGS/Mo junctions as a function of MoSe2 orientation and Na doping10.1002/pip.2377 ↗
41. Application of two-dimensional MoSe2 atomic layers to the lift-off process for producing light-weight and flexible bifacial Cu(In, Ga)Se2 solar cells10.1021/acsaem.0c01557 ↗