Layer-separated treatment accelerating growth of P-type hydrogenated nanocrystalline silicon in SHJ cells
Source abstract
Abstract
Doped nanocrystalline silicon has higher conductivity and lower parasitic absorption than doped amorphous silicon when used in photovoltaic heterojunction cells, which has been demonstrated in many previous studies. In this paper, the growth mechanism of p-type hydrogenated nanocrystalline silicon (p-nc-Si:H) thin films as doped emitter layer of silicon heterojunction (SHJ) solar cells is researched. Firstly, we focused on the effect of different PECVD deposition conditions on the growth rate and rapid crystallization of p-nc-Si:H given the frequency of 13.56 MHz, such as gas flow during deposition, chamber pressure, and power-density. We find that solar cell performs worse if deposition rate of p-nc-Si:H is dramatically increased. Then, we create layer-separated treatment method that balances growth rate and film quality through layered growth at different power levels. Finally, we designed layer-separated treatment for fast deposition rate of 2.11 Å/s with high crystallinity , then realized SHJ cell whose efficiency reached 25.88 %.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Silicon heterojunction solar cells with up to 26.81% efficiency achieved by electrically optimized nanocrystalline-silicon hole contact layers10.1038/s41560-023-01255-2 ↗
2. Growth mechanism of microcrystalline silicon at high pressure conditions10.1016/j.jnoncrysol.2004.02.021 ↗
3. Electrical and optical properties of boron‐doped nanocrystalline silicon films deposited by PECVD10.1002/pssa.200925107 ↗
4. Low temperature fast growth of nanocrystalline silicon films by rf-PECVD from SiH4/H2 gases: microstructural characterization10.1088/0022-3727/41/19/195413 ↗
5. Industrial-scale deposition of nanocrystalline silicon oxide for 26.4%-efficient silicon heterojunction solar cells with copper electrodes10.1038/s41560-023-01388-4 ↗
6. Relationship between Raman crystallinity and open-circuit voltage in microcrystalline silicon solar cells10.1016/j.solmat.2003.07.004 ↗
7. The effect of small pyramid texturing on the enhanced passivation and efficiency of single c-Si solar cells10.1039/C6RA05321A ↗
8. The relation between precursor gas flows, thickness dependent material phases, and opto-electrical properties of doped a/nc-SiOX≥0:H films10.1109/JPHOTOV.2021.3059940 ↗
9. Deposition high quality P-type microcrystalline silicon thin films by RF-PECVD
10. The effect of ion-surface and ion-bulk interactions during hydrogenated amorphous silicon deposition10.1063/1.2786873 ↗
11. Dipoles and defects caused by CO2 plasma improve carrier transport of silicon solar cells10.1002/pip.3761 ↗
12. Bifunctional CO2 plasma treatment at the i/p interface enhancing the performance of planar silicon heterojunction solar cells10.1002/pssr.202100010 ↗