journal article·2025-01Open access

Effect of manufacturing tolerances on Micro-CPV assemblies: A quantitative approach based on statistical modeling

Elisa Kaiser, Maike Wiesenfarth, Peter Schöttl, Marc Steiner, Stefan W. Glunz, Henning Helmers

Abstract

In micro-concentrator photovoltaics (micro-CPV) minimized components as cells (<1 × 1 mm 2 ) and lenses are used, promising significant cost reductions through parallel manufacturing and reduced material volumes. However, tolerances, such as deviations from nominal size, geometry or position, impact module performance, especially for non-ideal alignment towards the sun. To study the interplay of different, independent tolerances and their effects on current generation, a comprehensive parameter study is practically not feasible, because of the vast number of possible combinations. In this work, we introduce a novel method for assessing tolerances by employing a Monte-Carlo approach to randomly select and combine tolerances in a cell-lens unit. It allows to identify relevant tolerances and quantitatively assess their influence on module performance, namely optical efficiency, and photocurrent as function of angle of incidence and, thus, acceptance angle. We apply the model to a micro-CPV module developed at Fraunhofer ISE and use tolerance distributions based on measurements. We find that the most crucial parameter is the position of the secondary optical element. Given the measured tolerance distributions, the acceptance angles for 90 % of the cases are above 0.5° for 10 % current loss. The developed approach is a crucial tool for identifying and assessing critical tolerances within a manufacturing line, facilitating techno-economic optimization of design and manufacturing processes. • Novel statistical method to analyze the interaction of multiple tolerances. • Method applied to micro-CPV cell-lens unit based on measured distributions. • Monte-Carlo approach enables quantitative assessment in raytracing model. • Position of secondary lens affects current and acceptance angle the most.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: solar cell performance optimization · Silicon and Solar Cell Technologies · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Challenges in the design of concentrator photovoltaic (CPV) modules to achieve highest efficiencies10.1063/1.5046752 ↗
2. Cost analysis of flat-plate concentrators employing microscale photovoltaic cells for high energy per unit area applications
3. Integrated micro‐scale concentrating photovoltaics: a scalable path toward high‐efficiency, low‐cost solar power10.1002/solr.202300363 ↗
4. A review of the promises and challenges of micro-concentrator photovoltaics10.1063/1.5001441 ↗
5. Forced motion activated self-alignment of micro-CPV solar cells10.1109/JPHOTOV.2024.3355403 ↗
6. Experimental and simulative correlations of the influence of solder volume and receptor size on the capillary self-alignment of micro solar cells10.1109/JMEMS.2024.3352396 ↗
7. Impact of pad layouts and solder volume on self-alignment of micro solar cells
8. Thin concentrator photovoltaic module with micro-solar cells which are mounted by self-align method using surface tension of melted solder
9. Fabrication of high-performance lens arrays for micro-concentrator photovoltaics using ultraviolet imprinting10.1007/s00170-024-13350-z ↗
10. “Comparative analysis of different secondary optical elements for aspheric primary lenses,” (eng)10.1364/OE.17.006487 ↗
11. Ball lens as secondary optical element for CPV system10.1016/j.solener.2017.02.009 ↗
12. Experimental proof and theoretical analysis on effectiveness of passive homogenizers to 3J concentrator solar cells
13. Misalignments characterization for micro-CPV modules10.1063/5.0032292 ↗
14. ALCHEMI – a low cost, high efficiency, optoelectronic HCPV module for 1000× operation10.1063/1.5053493 ↗
15. Mechanical tolerances study through simulations and experimental characterization for a 1000X micro-concentrator CPV module10.1063/1.5001418 ↗
16. Technical boundaries of micro-CPV module components: how small is enough?10.1063/5.0099878 ↗
17. Effects of manufacturing tolerances on micro-CPV module performance10.1063/5.0146360 ↗
18. Optics development for micro-cell based CPV modules
19. Experimental analysis and simulation of a production line for CPV modules: impact of defects, misalignments, and binning of receivers10.1002/ese3.178 ↗
20. Off-Axis characteristics of CPV modules result from lens-cell misalignment—measurement and Monte Carlo simulation10.1109/JPHOTOV.2016.2589360 ↗
21. 1-D and 2-D Monte Carlo simulations for analysis of CPV module characteristics including the acceptance angle impacted by assembly errors10.1016/j.solener.2017.03.060 ↗
22. Alignment tolerance control of the micro CPV array using Monte Carlo methods
23. Schöttl · 2022
24. Raytrace3D-Power tower - a novel optical model for central receiver systems
25. Arens · 2012
26. 2008
27. Representative terrestrial solar brightness profiles10.1115/1.1464880 ↗
28. AZUR's new 5C46 CPV cell: final design for optimized outdoor performance10.1063/5.0100397 ↗
29. E. Kaiser, M. Wiesenfarth, P. Schöttl, M. Steiner, S. W. Glunz, H. Helmers, Two-step nested optical-electrical monte-carlo approach to analyze the influence of manufacturing tolerances on micro-CPV module performance, Sol. Energy Mater. Sol. Cells to be published https://doi.org/10.1016/j.solmat.2024.113257.10.1016/j.solmat.2024.113257 ↗