Metal-grid modeling and optimizations for organic solar cells
Source abstract
Abstract
Abstract In recent years, the efficiency of organic solar cells has been rapidly increasing, with lab-scale devices having crossed the point of 17% efficiency. However, large-area devices are still a step behind, only just recently crossing the 12% limit. One of the reasons for this observed lag is the finite conductivity of the transparent electrode used that introduces power loss. However, this problem can be solved by adding a metal grid to the transparent electrode to increase its conductivity. In this work, we studied, both theoretically and experimentally, the effect of a metal grid on the performance of organic solar cells. Specifically, we investigated cell performance as a function of the positioning and number of grid lines. Our results show that there is a characteristic cell length that depends on the cell's optoelectronic properties and the transparent electrode conductivity, and it enables prediction of an optimized number of grid lines for a given cell size. Moreover, it can be used to calculate the preferred position of the grid lines. Our findings of both the number and positioning of the grid lines can boost large-area cell efficiency even further and reduce the gap between large-area and lab-scale devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Organic and solution-processed tandem solar cells with 17.3% efficiency10.1126/science.aat2612 ↗
2. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
3. Single‐junction organic photovoltaic cells with approaching 18% efficiency10.1002/adma.201908205 ↗
4. Organic photovoltaic modules with new world record efficiencies10.1002/pip.3336 ↗
5. Area dependent efficiency of organic solar cells10.1063/1.2998540 ↗
6. S. Choi, W.J. Potscavage Jr, B. Kippelen, Area-scaling of organic solar cells, J. Appl. Phys. 106 54507.10.1063/1.3211850 ↗
7. Variations of cell performance in ITO-free organic solar cells with increasing cell areas10.1088/0268-1242/26/3/034010 ↗
8. Origin of size effect on efficiency of organic photovoltaics10.1063/1.3567930 ↗
9. Nelson · 2003
10. A new model of organic solar cells reveals open circuit conditions and size dependent power loss induced by the finite conductivity of a transparent contact10.1063/1.4974537 ↗
11. Organic solar cells using nanoimprinted transparent metal electrodes10.1002/adma.200800750 ↗
12. Metal grid/conducting polymer hybrid transparent electrode for inverted polymer solar cells10.1063/1.3394679 ↗
13. Influence of oxygen on semi-transparent organic solar cells with gas permeable electrodes10.1016/j.orgel.2009.08.001 ↗
14. ITO-free organic solar cells with roll-to-roll coated organic functional layers from non-halogenated solvents10.1016/j.solmat.2014.02.001 ↗
15. ITO-free flexible organic solar cells with printed current collecting grids10.1016/j.solmat.2010.08.011 ↗
16. Ag grid/ITO hybrid transparent electrodes prepared by inkjet printing10.1016/j.solmat.2011.02.016 ↗
17. High efficiency, fully inkjet printed organic solar cells with freedom of design10.1039/C5TA00540J ↗
18. New figure of merit for transparent conductors10.1063/1.323240 ↗
19. High figure-of-merit ultrathin metal transparent electrodes incorporating a conductive grid10.1063/1.3299259 ↗
20. Minimization of the effect of the collecting grid in a solar cell based silicon10.1016/j.solmat.2004.07.038 ↗
21. Bendable transparent conductive meshes based on multi-layer inkjet-printed silver patterns10.1088/0960-1317/26/3/035012 ↗
22. Flexible, long-lived, large-area, organic solar cells10.1016/j.solmat.2006.10.013 ↗
23. Current collecting grids for ito‐free solar cells10.1002/aenm.201100552 ↗
24. Evaluation of ink-jet printed current collecting grids and busbars for ITO-free organic solar cells10.1016/j.solmat.2012.04.039 ↗
25. Direct visualization of charge-extraction in metal-mesh based OPV cells by light-biased LBIC10.1109/JPHOTOV.2017.2699230 ↗
26. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
27. Large-area organic solar cells by accelerated blade coating10.1016/j.orgel.2015.03.001 ↗
28. Large‐area organic solar cells: material requirements, modular designs, and printing methods10.1002/adma.201805089 ↗