journal article·2021-08

Solid-state reaction process for high-quality organometallic halide perovskite thin film

Chien-Chung Hsu, Sheng-Min Yu, Kun-Mu Lee, Chuan-Jung Lin, Hao-Chien Cheng, Fu-Rong Chen

Publisher page

Abstract

Abstract Recently, a hybrid perovskite material, ABX3 (A= Cs, CH3NH3, NH2CHNH2; B= Pb, Sn; X= Cl, Br, I), has received much attention as an active layer in new-generation solar cells. This material is usually fabricated with either a one-step or a two step process in solution. However, the surface morphology, nucleation rate and grain growth rate of the CH3NH3PbI3 perovskite light absorber prepared by the solution reaction process (SRP) are hard to control. Here, we show a fast solid-solid reaction process (SSRP), to fabricate ultraflat (roughness of approximately 12 nm) CH3NH3PbI3 perovskite thin films with large grain sizes (~947 nm). The SSRP simply involves directly contacting a lead iodide thin film (PbI2) with methylammonium iodide powder (CH3NH3I) without any chemical reagents at 120°C under a normal atmospheric environment. The SSRP reaction dynamics is investigated by an in situ heating scanning electron microscope (SEM) system. This innovative SSRP is an easy approach for the large-scale fabrication of planar heterojunction perovskite solar cells and allows us to demonstrate a power conversion efficiency of approximately 15.27% (active area of 0.16 cm2).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Solid-state spectroscopy and crystallography

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Bright light-emitting diodes based on organometal halide perovskite10.1038/nnano.2014.149 ↗
2. Mesoporous scaffolds based on TiO2 nanorods and nanoparticles for efficient hybrid perovskite solar cells10.1039/C5TA06727H ↗
3. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%10.1038/srep00591 ↗
4. Efficient inorganic–organic hybrid heterojunction solar cells containing perovskite compound and polymeric hole conductors10.1038/nphoton.2013.80 ↗
5. Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
6. Long-Range.Balanced electron- and hole-transport lengths in organic-inorganic CH3NH3PbI310.1126/science.1243167 ↗
7. All-perovskite tandem solar cells with 24.2% certified efficiency and area over 1 cm2 using surface-anchoring zwitterionic antioxidant10.1038/s41560-020-00705-5 ↗
8. Fully textured monolithic perovskite/silicon tandem solar cells with 25.2% power conversion efficiency10.1038/s41563-018-0115-4 ↗
9. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
10. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
11. Overcoming ultraviolet light instability of sensitized TiO2 with meso-superstructured organometal tri-halide perovskite solar cells10.1038/ncomms3885 ↗
12. Efficient planar heterojunction perovskite solar cells by vapour deposition10.1038/nature12509 ↗
13. A large grain size perovskite thin film with a dense structure for planar heterojunction solar cells via spray deposition under ambient conditions,10.1039/C5RA09110A ↗
14. Poly(ethylene glycol)–[60]Fullerene-based materials for perovskite solar cells with improved moisture resistance and reduced hysteresis10.1002/cssc.201702265 ↗
15. Gas-induced formation/Transformation of organic–inorganic halide perovskites10.1021/acsenergylett.7b00667 ↗
16. Methylamine-gas-induced defect-healing behavior of CH3NH3PbI3 thin films for perovskite solar cells10.1002/anie.201504379 ↗
17. The growth of a CH3NH3PbI3 thin film using simplified close space sublimation for efficient and large dimensional perovskite solar cells,10.1039/C5EE03620H ↗
18. CH3NH3I treatment temperature of 70 °C in low-pressure vapor-assisted deposition for mesoscopic perovskite solar cells10.1016/j.cplett.2017.11.058 ↗
19. High-performance large-area perovskite solar cells enabled by confined space sublimation10.1021/acsami.0c10830 ↗
20. Control of the morphology and crystallinity of a PbI2 layer for large-area perovskite films prepared by close space sublimation10.1021/acsaem.8b00610 ↗
21. Facile preparation of organometallic perovskite films and high-efficiency solar cells using solid-state chemistry10.1007/s12274-014-0662-1 ↗
22. Morphological control for high performance, solution-processed planar heterojunction perovskite solar cells10.1002/adfm.201302090 ↗
23. Direct calorimetric verification of thermodynamic instability of lead halide hybrid perovskites
24. Selection of anti-solvent and optimization of dropping volume for the preparation of large area sub-module perovskite solar cells10.1016/j.solmat.2017.08.010 ↗
25. Room-temperature crystallization of hybrid-perovskite thin films via solvent–solvent extraction for high-performance solar cells10.1039/C5TA00477B ↗
26. Planar heterojunction perovskite/PC71BM solar cells with enhanced open-circuit voltage via a (2/1)-step spin-coating process10.1039/C4TA03674C ↗
27. Efficient luminescent solar cells based on tailored mixed-cation perovskites10.1126/sciadv.1501170 ↗
28. Beneficial effects of PbI2 incorporated in organo- lead halide perovskite solar cells10.1002/aenm.201502104 ↗
29. Correlation of annealing time with crystal structure, composition, and electronic properties of CH3NH3PbI3−xClx mixed-halide perovskite films10.1039/C6CP06347K ↗
30. Effects of annealing time on triple cation perovskite films and their solar cells
31. Li
32. Uniform, stable, and efficient planar-heterojunction perovskite solar cells by facile low-pressure chemical vapor deposition under fully open-air conditions10.1021/am5077588 ↗
33. Ionic reactivity at contacts and aging of methylammonium lead triiodide perovskite solar cells10.1002/aenm.201502246 ↗
34. Surface engineering of perovskite films for efficient solar cells10.1038/s41598-017-14920-w ↗
35. Investigation of inverted perovskite solar cells for viscosity of PEDOT: PSS solution10.3390/cryst8090358 ↗