Quantitative adhesion characterization of antireflective coatings in multijunction photovoltaics
Source abstract
Abstract
Abstract We discuss the development of a new composite dual cantilever beam (cDCB) thin-film adhesion testing method, which enables the quantitative measurement of adhesion on the thin and fragile substrates used in multijunction photovoltaics. In particular, we address the adhesion of several 2- and 3-layer antireflective coating systems on multijunction cells. By varying interface chemistry and morphology through processing, we demonstrate the marked effects on adhesion and help to develop an understanding of how high adhesion can be achieved, as adhesion values ranging from 0.5 J/m2 to 10 J/m2 were measured. Damp heat (85 °C/85% RH) was used to invoke degradation of interfacial adhesion. We demonstrate that even with germanium substrates that fracture relatively easily, quantitative measurements of adhesion can be made at high test yield. The cDCB test is discussed as an important new methodology, which can be broadly applied to any system that makes use of thin, brittle, or otherwise fragile substrates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: solar cell performance optimization · Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. III–V multijunction solar cells for concentrating photovoltaics10.1039/B809257E ↗
2. The potential of III–V semiconductors as terrestrial photovoltaic devices10.1002/pip.715 ↗
3. Editorial: toward 100 gigawatts of concentrator photovoltaics by 203010.1109/JPHOTOV.2013.2270341 ↗
4. R.R. King, A. Boca, W. Hong, X.Q. Liu, D. Bhusari, D. Larrabee, et al., Band-gap-engineered architectures for high-efficiency multijunction concentrator solar cells, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference on Exhibition, 2009, pp. 1–7, doi: 10.4229/24thEUPVSEC2009-1AO.5.2.
5. T.N.D. Tibbits, P. Beutel, M. Grave, C. Karcher, E. Oliva, G. Siefer, et al., New efficiency frontiers with wafer-bonded multi-junctions solar cells, in: Proceedings of European PV Solar Energy Conference Exhibition, 2014, pp. 1–4, doi: 10.4229/EUPVSEC20142014–4CP.2.1.
6. P.J. Verlinden, A. Lewandowski, C. Bingham, G.S. Kinsey, R.A. Sherif, J.B. Lasich, Performance and reliability of multijunction III–V modules for concentrator dish and central receiver applications, WCPEC-4, in: Proceedings of the 2006 IEEE 4th World Conference Photovoltaic Energy Conversion, vol. 1, 2007, pp. 592–597, doi: 10.1109/WCPEC.2006.279526.10.1109/WCPEC.2006.279526 ↗
7. Spectral response and energy output of concentrator multijunction solar cells10.1002/pip.875 ↗
8. M.A. Quintana, D.L. King, T.J. McMahon, C.R. Osterwald, Commonly observed degradation in field-aged photovoltaic modules, in: Proceedings of the Conference Record of the Twenty-Ninth IEEE Photovoltaic Specialists Conference, 2002, pp. 1436–1439, doi: 10.1109/PVSC.2002.1190879.10.1109/PVSC.2002.1190879 ↗
9. A.M. Reis, N.T. Coleman, M.W. Marshall, P.A. Lehman, C.E. Chamberlin, Comparison of PV module performance before and after 11-years of field exposure, in: Proceedings of the Conference Record of the Twenty-Ninth IEEE Photovoltaic Specialists Conference, 2002, pp. 1432–1435, doi: 10.1109/PVSC.2002.1190878.10.1109/PVSC.2002.1190878 ↗
10. Photovoltaic module performance and durability following long-term field exposure10.1063/1.58001 ↗
11. Reliability
12. High-irradiance degradation tests on concentrator GaAs solar cells10.1002/pip.487 ↗
13. Reliability of III–V concentrator solar cells10.1016/j.microrel.2010.07.045 ↗
14. A novel approach of accelerated ageing tests for high concentration III–V multijunction solar cells through rapid irradiation/thermal cycles10.1016/j.solener.2015.03.033 ↗
15. J.A. Tsanakas, M. Karoglou, E.T. Delegou, P.N. Botsaris, A. Bakolas, A. Moropoulou, Assessment of the performance and defect investigation of PV modules after accelerated ageing tests, in: Proceedings of the International Conference on Renewable Energies and Power Quality, Bilbao, Spain, 2013.10.24084/repq11.472 ↗
16. Damp-heat induced performance degradation for InGaP/GaAs/Ge triple-junction solar cell10.1155/2014/410717 ↗
17. Utilizing lateral current spreading in multifunction solar cells: an alternative approach to detecting mechanical defects10.1063/1.2216868 ↗
18. Luque · 2007
19. Preparation and characterization of sol–gel TiO2 antireflective coatings for silicon10.1016/S0040-6090(01)00963-4 ↗
20. Highly transparent polyimide/nanocrystalline-titania hybrid optical materials for antireflective applications10.1016/j.tsf.2011.08.002 ↗
21. Compatibility of antireflective coatings on glass for solar applications with photocatalytic properties10.1016/j.solener.2011.12.010 ↗
22. High yield four-point bend thin film adhesion testing techniques10.1016/j.engfracmech.2011.05.010 ↗
23. Adhesion and debonding of multi-layer thin film structures10.1016/S0013-7944(98)00052-6 ↗
24. Environmental effects on interfacial adhesion10.1016/S0026-2714(01)00150-0 ↗
25. Decohesion kinetics in polymer organic solar cells10.1021/am506482q ↗
26. Plasticity contributions to interface adhesion in thin-film interconnect structures10.1557/JMR.2000.0395 ↗
27. High performance anti-reflection coatings for broadband multi-junction solar cells10.1016/S0927-0248(00)00253-1 ↗
28. C.E. Valdivia, E. Desfonds, D. Masson, S. Fafard, A. Carlson, J. Cook, et al., Optimization of antireflection coating design for multi-junction solar cells and concentrator systems, in: Proceedings of the Photonics North, 2008, p. 709915, doi: 10.1117/12.807675.10.1117/12.807675 ↗
29. IEC 62108, Concentrator photovoltaic (CPV) modules and assemblies - design qualification and type approval, Geneva, 2007.
30. R. France, M. Steiner, T. Deutsch, E.A. Brucker, C.-S. Jiang, A.G. Norman, Oxidation and characterization of AlInP under light-soaked, damp heat conditions, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference, 2010, pp. 002016–002020, doi:10.1109/PVSC.2010.5616977.10.1109/PVSC.2010.5616977 ↗
31. ASTM D3359, Standard Test Methods for Measuring Adhesion by Tape Test, West Conshohocken, PA, 2009.