journal article·2018-06

Conductive-paste-based high-yielding interconnection process for c-Si photovoltaic modules with 50 µm thin cells

Hyung-Jun Song, Tae Hee Jung, Soo Min Kim, Woo Gyun Shin, Ga-Eon Jin, Young Chul Ju, Kyung Taek Jeong, Hee-eun Song, Min Gu Kang, Jeong In Lee, Gi Hwan Kang

Publisher page

Abstract

Thin crystalline silicon (c-Si) photovoltaic (PV) cells (< 100 µm) have the potential to curtail manufacturing costs by reducing the amount of Si needed per wafer. However, thermo-mechanical stress induced by high-temperature (> 200 °C) soldering causes frequent wafer breakage in thin c-Si-based modules. Hence, in this work, we proposed low-temperature interconnection method using conductive paste (CP) for thin c-Si PV modules and systematically studied the modules’ electrical and mechanical properties as a function of annealing temperature of CP. The potential advantage of this method is significantly reduced wafer bowing due to the low-temperature tabbing (< 150 °C) of CP dispensed cells to ribbons using heat and pressure during lamination. Module degradation and peel stress tests indicated that CP cured above its melting point provides stable (degraded 3.0% after 500 h damp heat test) and efficient current flow paths. By contrast, CP annealed below the melting point is vulnerable to thermal and humidity stress, leading to 7.8% degraded output after the test. Given these features, stable, large modules with thin c-Si cells integrated using a CP approach (laminated at 150 °C) were successfully realized without cell breakage.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. The effects of temperature and solder on the wettability between ribbon and solar cell10.1016/j.solmat.2008.10.005 ↗
2. Durability of Pb-free solder between copper interconnect and silicon in photovoltaic cells10.1002/pip.944 ↗
3. Crystalline silicon PV module technology
4. Performance of low series-resistance interconnections on the polycrystalline solar cells10.1016/j.solmat.2010.04.034 ↗
5. R. Meier, M. Pander, R. Klengel, S. Dietrich, S. Klengel, M. Ebert, J. Bagdahn, Reduction of soldering induced stresses in solar cells by microstructural optimization of copper-ribbons, in: Proceedings of the SPIE Solar Energy+ Technology, 2011, pp. 811206-1-13.10.1117/12.893519 ↗
6. Mechanical Investigations on metallization layouts of solar cells with respect to module reliability10.1016/j.egypro.2013.07.308 ↗
7. J. Wendt, M. Träger, M. Mette, A. Pfennig, B. Jäckel, The link between mechanical stress induced by soldering and micro damages in silicon solar cells, in: Proceedings of 24 th European Photovoltaic Solar Energy Conference and Exhibitions, 2009, pp. 3420–3423.
8. From cells to laminate: probing and modeling residual stress evolution in thin silicon photovoltaic modules using synchrotron X-ray micro-diffraction experiments and finite element simulations10.1002/pip.2891 ↗
9. A.M. Gabor, M. Ralli, S. Montminy, L. Alegria, C. Bordonaro, J. Woods, L. Felton, M. Davis, B. Atchley, T. Williams, Soldering induced damage to thin Si solar cells and detection of cracked cells in modules, in: Proceedings of the 21st European Photovoltaic Solar Energy Conference and Exhibitions, 2006, pp. 2042–2047.
10. Degradations of silicon photovoltaic modules: a literature review10.1016/j.solener.2013.07.005 ↗
11. Faults and infrared thermographic diagnosis in operating c-Si photovoltaic modules: a review of research and future challenges10.1016/j.rser.2016.04.079 ↗
12. The risk of loss in crystalline silicon based photovoltaic modules due to micro-cracks10.1016/j.solmat.2010.10.034 ↗
13. Study on long term stability of photo-voltaic modules and analysis of power degradation using accelerated aging tests and electroluminescence technique10.1016/j.egypro.2011.06.156 ↗
14. Enhanced light-trapping in laser-crystallised silicon thin-film solar cells on glass by optimised back surface reflectors10.1016/j.solener.2017.04.069 ↗
15. Experimental and simulation study for ultrathin (~ 100 µm) mono crystalline silicon solar cell with 156 × 156 mm2 area10.1007/s12540-014-3021-6 ↗
16. 24.7% record efficiency HIT solar cell on thin silicon wafer10.1109/JPHOTOV.2013.2282737 ↗
17. Manufacturing 100-μm-thick silicon solar cells with efficiencies greater than 20% in a pilot production line10.1002/pssa.201431241 ↗
18. F. Huster, Aluminium-back surface field: bow investigation and elimination, in: Proceedings of the 20th European Photovoltaic Solar Energy Conference and Exhibitions, 2005, pp. 635–638.
19. Optical transmission as a fast and non-destructive tool for determination of ethylene-co-vinyl acetate curing state in photovoltaic modules10.1002/pip.1175 ↗
20. I.J. Bennett, E.E. Bende, M.J.A.A. Goris, W. Eerenstein, An overview of developoments in foil-based back-contact modules, in: Proceedings of the 29th European Photovoltaics Science and Enginnering Conference, 2014, pp. 5–8.
21. A woven fabric for interconnecting back-contact solar cells10.1002/pip.2851 ↗
22. Interconnection through vias for improved efficiency and easy module manufacturing of crystalline silicon solar cells10.1016/S0927-0248(00)00111-2 ↗
23. Low-temperature interconnection of PVD-Aluminium metallization10.1016/j.egypro.2016.10.088 ↗
24. Comparison of new conductive adhesives based on silver and carbon nanotubes for solar cells interconnection10.1016/j.solmat.2012.10.020 ↗
25. A review of interconnection technologies for improved crystalline silicon solar cell photovoltaic module assembly10.1016/j.apenergy.2015.04.120 ↗
26. Lead-Free On-Laminate Laser Soldering: a New Module Assembling Concept10.1002/pip.782 ↗
27. Reduction of thermomechanical stress using electrically conductive adhesives10.1016/j.egypro.2015.07.049 ↗
28. Early degradation of silicon PV modules and guaranty conditions10.1016/j.solener.2011.06.011 ↗
29. Mechanical investigations on metallization layouts of solar cell with respect to module reliability10.1016/j.egypro.2013.07.308 ↗
30. Solar cell improvement by using a multi busbar design as front electrode10.1016/j.egypro.2012.07.056 ↗
31. Growth kinetics of Ag3Sn in silicon solar cells with a sintered Ag metallization layer10.1016/j.solmat.2014.01.018 ↗
32. Characterizations of Cu/Sn–Zn solder/Ag interfaces on photovoltaic ribbon for silicon solar cells10.1109/JPHOTOV.2014.2373822 ↗
33. Cure state assessment of EVA-copolymers for PV-applications comparing dynamic-mechanical, dielectric and calorimetric properties10.1016/j.solmat.2015.07.024 ↗
34. Optimization of solar module encapsulant lamination by optical constant determination of ethylene-vinyl acetate10.1155/2015/276404 ↗
35. IEC 61215: 2016-17 Crystalline silicon terrestrial photovoltaic (PV) modules – design qualification and type approval, 2016.
36. Spatial and orientational distribution of cracks in crystalline photovoltaic modules generated by mechanical load tests10.1016/j.solmat.2011.06.032 ↗