Interface induced in-situ vertical phase separation from MAPbI3:Spiro-OMeTAD precursors for perovskite solar cells
Source abstract
Abstract
Abstract The major obstacles delaying the commercialization of thin film solar cells based on hybrid organic halide perovskite are the expensive materials, instability of the devices and the complicated multi-step fabrication process. To solve these challenges, we present a simple and high material utilization strategy which employing the polyethyleneimine (PEI) interface abduction to in-situ fabricate perovskite layer and hole transporting layer (HTL) from MAPbI3 and Spiro-OMeTAD (SPI) mixed precursors in single step. Analyzation find that the in-situ phase separation is induced by the PEI abduction. The existence of PEI blocks SPI form Ti–O bond with bottom TiO2 surface and converting the interaction between SPI and bottom interface to Van der Waals interaction. Employing this fabrication technique for PSCs, remarkably improves materials utilization of perovskite and SPI, as well as exhibiting superior stability of about 95% initial efficiency even after 68 days of storage in ambient condition without encapsulation. We believe that our strategy will pave a new way for simple, economical and stable PSCs preparation, and provide an inspiration to simplify fabrication process for organic-inorganic electronic devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Quantum Dots Synthesis And Properties · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. A generic interface to reduce the efficiency-stability-cost gap of perovskite solar cells10.1126/science.aao5561 ↗
3. Vertical phase separated cesium fluoride doping organic electron transport layer: a facile and efficient “bridge” linked heterojunction for perovskite solar cells10.1002/adfm.202001418 ↗
4. Solution-processed WO3 and water-free PEDOT:PSS composite for hole transport layer in conventional perovskite solar cell10.1016/j.electacta.2019.06.134 ↗
5. The synergistic effect of dimethyl sulfoxide vapor treatment and C60 electron transporting layer towards enhancing current collection in mixed-ion perovskite solar cells10.1016/j.jpowsour.2018.09.100 ↗
6. National Renewable Energy Laboratory, Best Research Cell Efficiency, http://www.nrel.gov/ncpv/images/efficiency_chart.jpg.
7. Perovskite ink with wide processing window for scalable high-efficiency solar cells, Nat
8. Toward high-efficiency, hysteresis-less, stable perovskite solar cells: unusual doping of hole-transporting material using a fluorine-containing hydrophobic lewis acid10.1039/C8EE00036K ↗
9. Addition of adamantylammonium iodide to hole transport layers enables highly efficient and electroluminescent perovskite solar cells10.1039/C8EE02404A ↗
10. Performance enhancement of AgBi2I7 solar cells by modulating a solvent-mediated adduct and tuning remnant BiI3 in one-step crystallization10.1039/C9CC00733D ↗
11. In-situ identification of cation-exchange-induced reversible transformations of 3D and 2D perovskites10.1039/C8CC02801J ↗
12. Simple synthesis and molecular engineering of low-cost and star-shaped carbazole-based hole transporting materials for highly efficient perovskite solar cells10.1039/C7TA04762B ↗
13. Soft-cover deposition of scaling-up uniform perovskite thin films for high cost-performance solar cells10.1039/C6EE01411A ↗
14. Understanding the effect of chlorobenzene and isopropanol anti-solvent treatments on the recombination and interfacial charge accumulation in efficient planar perovskite solar cells10.1039/C8TA03782E ↗
15. Scalable fabrication of efficient organolead trihalide perovskite solar cells with doctor-bladed active layers10.1039/C4EE03907F ↗
16. Toward large scale roll-to-roll production of fully printed perovskite solar cells10.1002/adma.201404598 ↗
17. Inkjet printing and instant chemical transformation of a CH3NH3PbI3/nanocarbon electrode and interface for planar perovskite solar cells10.1002/anie.201408638 ↗
18. A solvent- and vacuum-free route to large-area perovskite films for efficient solar modules10.1038/nature23877 ↗
19. Hole-transporting materials based on twisted bimesitylenes for stable perovskite solar cells with high efficiency10.1002/cssc.201501392 ↗
20. Over 20% PCE perovskite solar cells with superior stability achieved by novel and low-cost hole-transporting materials10.1016/j.nanoen.2017.09.035 ↗
21. Molecular engineering of conjugated polymers for efficient hole transport and defect passivation in perovskite solar cells10.1016/j.nanoen.2017.12.028 ↗
22. Continuous grain-boundary functionalization for high-efficiency perovskite solar cells with exceptional stability
23. An all-electron numerical method for solving the local density functional for polyatomic molecules10.1063/1.458452 ↗
24. From molecules to solids with the DMol3 approach10.1063/1.1316015 ↗
25. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
26. Ionic selective contact controls the charge accumulation for efficient and intrinsic stable planar homo-junction perovskite solar cells10.1016/j.nanoen.2019.104098 ↗
27. Adsorption features of formaldehyde on TiO2(110) surface probed by high-resolution scanning tunnelling microscopy10.1021/acs.jpclett.9b00522 ↗
28. Perovskite-polymer composite cross-linker approach for highly-stable and efficient perovskite solar cells10.1038/s41467-019-08455-z ↗
29. A theory for the estimation of surface and interfacial energies. I. derivation and application to interfacial tension10.1021/j150553a013 ↗
30. A theory for estimation of surface and interfacial energies. III. estimation of surface energies of solids from contact angle data10.1021/j100834a012 ↗
31. Impact of hole transport layer surface properties on the morphology of a polymer-fullerene bulk heterojunction10.1002/aenm.201301879 ↗
32. Amino-functionalized conjugated polymer as an efficient electron transport layer for high-performance planar-heterojunction perovskite solar cells10.1002/aenm.201501534 ↗
33. A gradient engineered hole-transporting material for monolithic series-type large-area perovskite solar cells10.1039/C7TA03890A ↗
34. Perovskite solar cells with 18.21% efficiency and area over 1 cm2 fabricated by heterojunction engineering10.1038/nenergy.2016.148 ↗
35. Observation of enhanced hole extraction in Br concentration gradient perovskite materials10.1021/acs.nanolett.6b02473 ↗
36. Novel approach toward hole-transporting layer doped by hydrophobic Lewis acid through infiltrated diffusion doping for perovskite solar cells10.1016/j.nanoen.2020.104509 ↗
37. Improved performance and reproducibility of perovskite solar cells by well-soluble tris(pentafluorophenyl)borane as a p-type dopant10.1021/acsami.7b02969 ↗