journal article·2025-12Open access

Laser-fired contacts for p-type c-Ge TPV devices

G. Rivera, M. Gamel, G. López, M. Garín, I. Martín

Abstract

Thermophotovoltaic (TPV) systems, which convert radiant heat into electricity, have become the most efficient heat-to-electricity technology. However, efforts to reduce its cost must still be prioritized to make it commercially competitive. Our research group focuses on epitaxial-free TPV devices using crystalline germanium (c-Ge) as an absorber. Following this cost-effective approach, in this work we specifically report on partially contacted rear surfaces on p-type c-Ge devices defined by laser-firing aluminium films through a dielectric passivating layer, leading to the so-called laser-fired contacts. This approach has been successfully adopted in silicon solar cells and was explored in early c-Ge TPV devices, but posed many technological challenges. In this work, we use an infrared ( λ = 1064 nm) laser and commercial p-type c-Ge wafers (1.2 Ω cm) passivated with a Al 2 O 3 /a-SiC film stack. By ToF-SIMS measurements, we confirm that part of the aluminium is diffused inside the c-Ge substrate creating p + regions. Additionally, by adjusting the aluminium thickness and the laser parameters, we are able to control the size of the spot while minimizing substrate damage. Optimized contacts lead to contact resistivity of 7.2·10 −5 Ω cm 2 and a surface recombination velocity at the contact of 1075 cm/s. As a proof of concept, this rear surface is introduced into c-Ge photovoltaic devices measured under 1 sun illumination, with a remarkable efficiency of 6.29 %. The obtained results suggest the potential of the contacts to be integrated in c-Ge devices optimized for TPV conditions.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Semiconductor Quantum Structures and Devices · Nanowire Synthesis and Applications · Advancements in Semiconductor Devices and Circuit Design

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Burger · 2020
2. Feasibility study of a thermo-photo-voltaic system for CHP application in residential buildings10.1016/j.apenergy.2012.01.049 ↗
3. Thermophotovoltaic energy in space applications: review and future potential10.1016/j.solmat.2016.12.007 ↗
4. Ultra high temperature latent heat energy storage and thermophotovoltaic energy conversion10.1016/j.energy.2016.04.048 ↗
5. Latent heat thermophotovoltaic batteries10.1016/j.joule.2022.01.010 ↗
6. Investigation of the potential of thermophotovoltaic heat recovery for the Turkish industrial sector10.1016/j.enconman.2013.05.030 ↗
7. Johnson · 2008
8. Bauer · 2011
9. Thermophotovoltaic conversion efficiency measurement at high view factors
10. Thin-film architectures with high spectral selectivity for thermophotovoltaic cells10.1021/acsphotonics.8b00508 ↗
11. Patterned dielectric back contact design for GaAs thermophotovoltaic devices10.1016/j.solmat.2024.113285 ↗
12. Near-perfect photon utilization in an air-bridge thermophotovoltaic cell10.1038/s41586-020-2717-7 ↗
13. High-efficiency air-bridge thermophotovoltaic cells10.1016/j.joule.2024.05.002 ↗
14. “Thermophotovoltaic efficiency of 40%,”10.1038/s41586-022-04473-y ↗
15. Efficient and scalable GaInAs thermophotovoltaic devices10.1016/j.joule.2022.10.002 ↗
16. Horowitz
17. Cost-effective 23.2% efficient germanium thermophotovoltaic converters for thermal batteries
18. 24.7% industrial tunnel oxide passivated contact solar cells prepared through tube PECVD integrating with plasma-assisted oxygen oxidation and in-situ doped polysilicon10.1016/j.solmat.2023.112396 ↗
19. Atomic layer deposition enabling higher efficiency solar cells: a review10.1016/j.nanoms.2019.10.001 ↗
20. Cost-efficient thermophotovoltaic cells based on germanium substrates10.1016/j.solmat.2009.06.017 ↗
21. Effect of the thickness of amorphous silicon carbide interlayer on the passivation of c-Ge surface by aluminium oxide films
22. 2024
23. p-type c-Si solar cells based on rear side laser processing of Al2O3/SiCx stacks10.1016/j.solmat.2012.05.012 ↗
24. Overcoming throughput limitations of laser systems in solar cell manufacturing via on-the-fly processing using polygon scanners10.1002/ente.202300445 ↗
25. Point-contact solar cells: modeling and experiment10.1016/0379-6787(86)90061-X ↗
26. 22.8% efficient silicon solar cell10.1063/1.101596 ↗
27. Point-contact silicon solar cells10.1109/T-ED.1984.21586 ↗
28. Laser-fired rear contacts for crystalline silicon solar cells10.1002/pip.422 ↗
29. Highly reflective and passivated ohmic contacts in p-Ge by laser processing of aSiCx:H(i)/Al2O3/aSiC films for thermophotovoltaic applications10.1016/j.solmat.2023.112622 ↗
30. Misconceptions and misnomers in solar cells10.1109/JPHOTOV.2013.2238289 ↗
31. van der Heide · 2009
32. Fernández · 2010
33. Application of quasi-steady-state photoconductance technique to lifetime measurements on crystalline germanium substrates10.1109/JPHOTOV.2020.2981839 ↗
34. Laser-fired contact optimization in c-Si solar cells10.1002/pip.1115 ↗
35. Kumar · 2014
36. Ohmic contacts for GaAs devices10.1016/0038-1101(67)90063-9 ↗
37. Fischer
38. Heterojunction Ge solar cells with an efficiency of 8.6%
39. Optical properties of intrinsic silicon at 300 K10.1002/pip.4670030303 ↗
40. Optical constants of germanium and thermally grown germanium dioxide from 0.5 to 6.6eV via a multisample ellipsometry investigation10.1116/1.4963075 ↗
41. Strategies for high fill factor and open-circuit voltage in low-doped c-Ge TPV cells with partially contacted surfaces using 3D simulations