Hole selective contacts based on transition metal oxides for c-Ge thermophotovoltaic devices
Source abstract
Abstract
Thermophotovoltaics has become a very attractive solution for heat-to-electricity conversion due to its excellent conversion efficiencies. However, further research is needed to reduce the device cost which is typically based on III-V semiconductors. To tackle this limitation, crystalline germanium (c-Ge) has been proposed as an excellent substrate for low-cost devices. One of the key advances behind high system efficiencies is the excellent reflectance of the out-of-band photons at the rear surface of the photovoltaic device. These photons with lower energy than the absorber bandgap are reflected back to the thermal emitter reducing its thermal losses. In this work, we explore the performance of hole selective contacts based on evaporated transition metal oxides (MoOx, VOx, WOx) to be introduced at the rear surface of c-Ge devices. Regarding electrical properties, we characterize the selectivity of the contact by measuring effective surface recombination velocity (Seff) and contact resistivity (ρC). Best results are obtained with MoOx contacted by Ag/ITO with Seff = 588 cm/s and ρC = 55.6 mΩ cm2 which can be improved by using gold as a metal contact leading to Seff = 156 cm/s and ρC = 60.9 mΩ cm2. Regarding out-of-band reflectance, it is better for the case of Ag/ITO/MoOx contact with 87.5% compared to 78.9% for Au/MoOx when a 1473 K black body spectrum is used. Device simulations show potential system efficiencies in the range of 18–19% which are comparable to the best reported efficiencies using c-Ge thermophotovoltaic devices.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Thermal Radiation and Cooling Technologies · solar cell performance optimization · Advanced Thermodynamics and Statistical Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Present efficiencies and future opportunities in thermophotovoltaics10.1016/j.joule.2020.06.021 ↗
2. Thermophotovoltaic energy in space applications: review and future potential10.1016/j.solmat.2016.12.007 ↗
3. Thermal energy grid storage using multi-junction photovoltaics10.1039/C8EE02341G ↗
4. Ultra high temperature latent heat energy storage and thermophotovoltaic energy conversion10.1016/j.energy.2016.04.048 ↗
5. A review of advances in thermophotovoltaics for power generation and waste heat harvesting10.1557/adv.2019.342 ↗
6. Solar thermophotovoltaics: reshaping the solar spectrum10.1515/nanoph-2016-0011 ↗
7. Enhanced photovoltaic energy conversion using thermally based spectral shaping10.1038/nenergy.2016.68 ↗
8. Ultraefficient thermophotovoltaic power conversion by band-edge spectral filtering10.1073/pnas.1903001116 ↗
9. Near-perfect photon utilization in an air-bridge thermophotovoltaic cell10.1038/s41586-020-2717-7 ↗
10. High-efficiency thermophotovoltaic energy conversion enabled by a metamaterial selective emitter10.1364/OPTICA.5.000213 ↗
11. Thermophotovoltaic efficiency 4010.1038/s41586-022-04473-y ↗
12. Back-surface optimization of germanium TPV cells10.1063/1.2711736 ↗
13. Cost-efficient thermophotovoltaic cells based on germanium substrates10.1016/j.solmat.2009.06.017 ↗
14. Hole selective MoOx contact for silicon solar cells10.1021/nl404389u ↗
15. Molybdenum oxide MoOx: a versatile hole contact for silicon solar cells10.1063/1.4903467 ↗
16. Transition metal oxides as hole-selective contacts in silicon heterojunctions solar cells10.1016/j.solmat.2015.08.028 ↗
17. Hole-collection mechanism in passivating metal-oxide contacts on Si solar cells: insights from numerical simulations10.1109/JPHOTOV.2018.2796131 ↗
18. Germanium photovoltaic cells with MoOx hole-selective contacts10.1016/j.solener.2019.02.009 ↗
19. Effect of the thickness of amorphous silicon carbide interlayer on the passivation of c-Ge surface by aluminum oxide films
20. Contactless determination of current–voltage characteristics and minority‐carrier lifetimes in semiconductors from quasi‐steady‐state photoconductance data10.1063/1.117723 ↗
21. Application of quasi-steady-state photoconductance technique to lifetime measurements on crystalline germanium substrates10.1109/JPHOTOV.2020.2981839 ↗
22. Detailed investigation of TLM contact resistance measurements on crystalline silicon solar cells10.1016/j.solener.2017.05.015 ↗
23. Contact selectivity and efficiency in crystalline silicon photovoltaics10.1109/JPHOTOV.2016.2598267 ↗
24. Investigation of the thermal stability of MoOx as hole-selective contacts for Si solar cells10.1063/1.5041774 ↗
25. Hole selective materials and device structures of heterojunction solar cells: recent assessment and future trends10.1063/1.5121327 ↗
26. Work function of indium tin oxide transparent conductor measured by photoelectron spectroscopy10.1063/1.116313 ↗
27. Dependence of indium–tin–oxide work function on surface cleaning method as studied by ultraviolet and x-ray photoemission spectroscopies10.1063/1.371859 ↗
28. Work function measurements on indium tin oxide films10.1016/S0368-2048(01)00310-3 ↗
29. Clugston · 1997 · 207