journal article·2014-06

A study of the effects of drying and sintering on the performance of organic photovoltaic devices

Joong Hyun Yeom, Manho Kim, Sehun Rhee, Jae-Woong Yu

Publisher page

Abstract

Abstract The effects of different processing methods on the performance of organic photovoltaics (OPVs) for the hole extraction layer and printed metal layers were studied. Four different methods (hot plate, air oven, vacuum oven and far-infrared oven) were utilized to dry hole extraction layers formed from aqueous nano-particle dispersions. The far-infrared oven showed the best drying characteristics and the sheet resistance was 69 Ω/□ in 240 s. To sinter a screen printed silver electrode, six different methods (hot plate, air oven, vacuum oven, far-infrared oven, UV lamp and microwave oven) were employed. The microwave oven yielded the most effective sheet resistance drop, as low as 0.06 Ω/□ in 20 s when the power of the microwave oven was 400 W. Using the fast processing methods developed in this study, the processing time can be reduced by about 40% without a loss in the performance of prepared devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. A life cycle analysis of polymer solar cell modules prepared using roll-to-roll methods under ambient conditions10.1016/j.solmat.2010.08.020 ↗
2. Economic assessment of solar electricity production from organic-based photovoltaic modules in a domestic environment10.1039/c1ee01766g ↗
3. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
4. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
5. A complete process for production of flexible large area polymer solar cells entirely using screen printing – first public demonstration10.1016/j.solmat.2008.12.001 ↗
6. Fabrication and processing of polymer solar cells: polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die coating and screen printing10.1016/j.solmat.2008.12.012 ↗
7. Roll-to-rollfabricationofmonolithiclarge-areapolymersolarcellsfreefrom indium-tin-oxide10.1016/j.solmat.2009.04.020 ↗
8. All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps10.1016/j.orgel.2009.03.009 ↗
9. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
10. ITO-free flexible polymer solar cells: from small model devices to roll-to-roll processed large modules10.1016/j.orgel.2011.01.009 ↗
11. Effect of process parameters on the morphology and nanostructure of roll-to-roll printed P3HT:PCBM thin films for organic photovoltaics
12. Substrate treatment and drying conditions effect on the properties of roll-to-roll gravure printed PEDOT:PSS thin films10.1016/j.mseb.2011.03.007 ↗
13. Microwave annealing of polymer solar cells with various transparent anode materials10.1063/1.3491213 ↗
14. Ink-jet printing and microwave sintering of conductive silver tracks10.1002/adma.200502422 ↗
15. Infra-red assisted sintering of inkjet printed silver tracks on paper substrates10.1007/s11051-011-0306-2 ↗
16. Pseudocapacitive contributions to electrochemical energy storage in TiO2 (Anatase) nanoparticles
17. Doping of the metal oxide nanostructure and its influence in organic electronics10.1002/adfm.200801639 ↗
18. Charge transport and photocurrent generation in poly(3- hexylthiophene):methanofullerene bulk-heterojunction solar cells
19. Influence of thermal treatment on the conductivity and morphology of PEDOT/PSS films10.1016/S0379-6779(03)00280-7 ↗