journal article·2018-05

Electrode de-wetting as a failure mechanism in thermally-aged OPV devices

William Greenbank, Lionel Hirsch, Sylvain Chambon

Publisher page

Abstract

Abstract Organic photovoltaic (OPV) solar cells are a promising solar energy technology that could greatly increase the number of ways that solar cells can be utilised. Many of these applications involve the use of thin silver electrodes, however little attention has been paid to the role that electrode thickness plays in the operational stability of the device. This study found that inverted OPV devices with thin silver electrodes exhibited a catastrophic failure with only modest amounts of thermal ageing – primarily driven by substantial increases in the series resistance and decreases in the fill factor of the devices. Subsequent analysis by atomic force microscopy and Rutherford backscattering spectrometry showed that as the devices aged, gaps in thin silver electrodes appeared, showing that the electrode was de-wetting from the device, which would explain the rise in series resistance. This represents an intrinsic vulnerability in inverted OPV devices that can avoided if the silver electrode is sufficiently thick (> 60 nm). This problem can be overcome with the addition of a thin metal-oxide layer on top of the electrode which greatly slowed the electrode de-wetting with little variation in device performance – representing a potential solution for applications where a thin silver electrode is required.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Intergovernmental Panel on Climate Change · 2014
2. Bloomberg New Energy Finance, New Energy Outlook 2016, 2016.
3. Solar trees: first large-scale demonstration of fully solution coated, semitransparent, flexible organic photovoltaic modules10.1002/advs.201500342 ↗
4. 25th anniversary article: rise to power – OPV-based solar parks10.1002/adma.201302031 ↗
5. A life cycle analysis of polymer solar cell modules prepared using roll-to-roll methods under ambient conditions10.1016/j.solmat.2010.08.020 ↗
6. Solar cell efficiency tables (version 47)10.1002/pip.2728 ↗
7. Stability of polymer solar cells10.1002/adma.201104187 ↗
8. The future costs of OPV – a bottom-up model of material and manufacturing costs with uncertainty analysis
9. Krebs · 2012
10. Morphology and thermal stability of the active layer in poly(p-phenylenevinylene)/methanofullerene plastic photovoltaic devices10.1021/ma035620+ ↗
11. Thermal stabilisation of polymer-fullerene bulk heterojunction morphology for efficient photovoltaic solar cells10.1002/adma.201401062 ↗
12. Morphological degradation in low bandgap polymer solar cells – an in operando study10.1002/aenm.201600712 ↗
13. A thermally stable semiconducting polymer10.1002/adma.200903420 ↗
14. Interfacial thermal degradation in inverted organic solar cells10.1063/1.4938554 ↗
15. Improved mechanical adhesion and electronic stability of organic solar cells with thermal ageing: the role of diffusion at the hole extraction interface10.1039/C6TA09665D ↗
16. Spray coated silver nanowires as transparent electrodes in OPVs for building integrated photovoltaics applications10.1016/j.solmat.2016.05.053 ↗
17. Flexible transparent conductive materials based on silver nanowire networks: a review10.1088/0957-4484/24/45/452001 ↗
18. Silver nanowire-based transparent, flexible, and conductive thin film10.1186/1556-276X-6-75 ↗
19. Efficient organic solar cells with solution-processed silver nanowire electrodes10.1002/adma.201100871 ↗
20. Thermally stable silver nanowire-polyimide transparent electrode based on atomic layer deposition of zinc oxide on silver nanowires10.1002/adfm.201503236 ↗
21. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
22. Estimation of the surface free energy of polymers10.1002/app.1969.070130815 ↗
23. Guiding the selection of processing additives for increasing the efficiency of bulk heterojunction polymeric solar cells10.1002/aenm.201300752 ↗
24. Long-term operational lifetime and degradation analysis of P3HT:PCBM photovoltaic cells10.1016/j.solmat.2010.09.007 ↗
25. Efficiency limiting factors of organic bulk heterojunction solar cells identified by electrical impedance spectroscopy10.1016/j.solmat.2006.10.020 ↗
26. An effective area approach to model lateral degradation in organic solar cells10.1002/aenm.201500835 ↗
27. Influence of cathode oxidation via the hole extraction layer in polymer:fullerene solar cells10.1016/j.orgel.2011.01.025 ↗
28. Origin of the s-shape upon aging in standard organic solar cells with zinc oxide as transport layer10.1021/jp5051518 ↗
29. Chu · 1978