Figure of merit for front electrodes of solar cells
Source abstract
Abstract
Conventional figures of merit often characterize the optical and electrical properties of transparent conductive thin films and are widely applied in research and industry. However, an appropriative figure is necessary to evaluate the front electrodes of solar cells. So an appropriate figure of merit is therefore proposed in this paper, specifically designed for the evaluation of the front electrodes of solar cells. The proposed figure is adapted from ΦTC, the most commonly used conventional figure of merit, with two changes. First, external quantum efficiency functions for different types of solar cells are explicitly considered. Second, data from the air mass 1.5 spectrum are used as weight factors to calculate the mean optical transmittance. With these two changes, the proposed figure of merit is shown to be well adapted to the photovoltaic field. To validate it, silicon heterojunction solar cells with different front electrodes were simulated as examples. By comparing the simulation results and the respective values of the proposed figure, it is evident that this figure of merit provides values that are proportional to the conversion efficiencies of solar cells. The proposed figure can therefore be used in the selection and manufacturing of front electrodes of solar cells. In addition, two variations on this figure of merit are proposed, specifically adapted to the characteristics of multiple electron-hole pairs cells and thermophotovoltaic cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: solar cell performance optimization · Chalcogenide Semiconductor Thin Films · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Highly conductive, transparent films of sputtered In2−xSnxO3− y10.1149/1.2403999 ↗
2. New figure of merit for transparent conductors10.1063/1.323240 ↗
3. Radio frequency sputter deposition of high-quality conductive and transparent ZnO: Al films on polymer substrates for thin film solar cells applications10.1016/j.tsf.2008.11.097 ↗
4. Green · 1982
5. Investigation of selective junctions using a newly developed tunnel current model for solar cell applications10.1016/j.solmat.2015.05.014 ↗
6. A study of p/ITO interface properties in n-i-p type amorphous silicon solar cells
7. Study on the ITO work function and hole injection barrier at the interface of ITO/a-Si: H (p) in amorphous/crystalline silicon heterojunction solar cells10.1016/j.materresbull.2012.04.106 ↗
8. Device design of GaSb/CdS thin film thermal photovoltaic solar cells
9. Third generation photovoltaics: solar cells for 2020 and beyond10.1016/S1386-9477(02)00361-2 ↗
10. Colloidal-quantum-dot photovoltaics using atomic-ligand passivation10.1038/nmat3118 ↗