Reducible fabrication cost for P3HT-based organic solar cells by using one-step synthesized novel fullerene derivative
Source abstract
Abstract
The cyclohexanone-containing fullerene mono-adduct, abbreviated as CHOC60, was efficiently prepared through single-step Diels-Alder reaction with 2-(trimethylsilyloxy)-l,3-butadiene and fullerenes. After reduction and esterification, CHOC60 was further converted into cyclohexyl acetate functional fullerene mono-adduct, named as CHAC60, which showed excellent solubility in common organic solvents. P3HT-based bulk heterojunction organic solar cells (OSCs) were fabricated through a typical structure of ITO/PEDOT:PSS/P3HT:(CHOC60 or CHAC60)/Ca/Al. The composite ratios of P3HT and the fullerene derivatives were modified such as 1:0.5, 1:1 and 1:1.5 (w/w). The devices fabricated using CHOC60 or CHAC60 as acceptors achieved the power conversion efficiencies (PCEs) of 2.97% and 3.15%, respectively, which exhibited comparative photovoltaic performances with commercial PC61BM. Moreover, CHOC60-based devices significantly reduced the manufacturing cost by the simplified synthesis of CHOC60 with high yield and low fullerene consumption. The non-aromatic side chain radical CHOC60 and CHAC60 provide a new idea for the design of fullerene derivative acceptors.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Fullerene Chemistry and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Two-layer organic photovoltaic cell10.1063/1.96937 ↗
2. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
3. Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption10.1021/ar2002446 ↗
4. Well-controlled thieno[3, 4-c] pyrrole-4, 6-(5H)-dione based conjugated polymers for high performance organic photovoltaic cells with the power conversion efficiency exceeding 9%10.1039/C5EE01627D ↗
5. Significant enhancement of polymer solar cell performance via side-chain engineering and simple solvent treatment10.1021/cm401618h ↗
6. 25th anniversary article: rise to power-OPV-based solar parks10.1002/adma.201302031 ↗
7. Efficient decommissioning and recycling of polymer solar cells: justification for use of silver10.1039/C3EE43746A ↗
8. A stability study of roll-to-roll processed organic photovoltaic modules containing a polymeric electron-selective layer10.1016/j.solmat.2016.03.034 ↗
9. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
10. Single-junction polymer solar cells with high efficiency and photovoltage10.1038/nphoton.2015.6 ↗
11. Efficient polymer solar cells employing a non-conjugated small-molecule electrolyte10.1038/nphoton.2015.126 ↗
12. Highly efficient organic solar cells with improved vertical donor–acceptor compositional gradient via an inverted off-center spinning method10.1002/adma.201504014 ↗
13. Fullerene derivatives as electron acceptors for organic photovoltaic cells10.1166/jnn.2014.9007 ↗
14. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
15. Interlaboratory outdoor stability studies of flexible roll-to-roll coated organic photovoltaic modules: stability over 10,000h10.1016/j.solmat.2013.04.024 ↗
16. Three dimensional corrugated organic photovoltaics for building integration; improving the efficiency, oblique angle and diffuse performance of solar cells10.1039/C5EE02162F ↗
17. Investigation of the degradation mechanisms of a variety of organic photovoltaic devices by combination of imaging techniques—the ISOS-3 inter-laboratory collaboration10.1039/c2ee03508a ↗
18. Columnar structure in bulk heterojunction in solution-processable three-layered p-i-n organic photovoltaic devices using tetrabenzoporphyrin precursor and silylmethyl [60] fullerene10.1021/ja9048702 ↗
19. Indene-C60 bisadduct: a new acceptor for high-performance polymer solar cells10.1021/ja908602j ↗
20. A simple and effective modification of PCBM for use as an electron acceptor in efficient bulk heterojunction solar cells10.1002/adfm.201001807 ↗
21. Effects of solubilizing group modification in fullerene bis-adducts on normal and inverted type polymer solar cells10.1021/cm3010369 ↗
22. o-quinodimethane-methano [60] fullerene and Thieno-o-quinodimethane-methano [60] fullerene as efficient acceptor materials for polymer solar cells10.1039/c2jm35247h ↗
23. A simple method to prepare head-to-tail coupled, regioregular poly (3-alkylthiophenes) using grignard metathesis10.1002/(SICI)1521-4095(199903)11:3<250::AID-ADMA250>3.0.CO;2-J ↗
24. Preparation and characterization of fulleroid and methanofullerene derivatives10.1021/jo00108a012 ↗
25. Effect of synthetic accessibility on the commercial viability of organic photovoltaics10.1039/c3ee24138f ↗
26. A low-cost mixed fullerene acceptor blend for printed electronics10.1039/C6TA04191D ↗
27. Highly efficient and thermally stable polymer solar cells with dihydronaphthyl-based [70] fullerene bisadduct derivative as the acceptor10.1002/adfm.201102771 ↗
28. Synthesis of a soluble fulleropyrrolidine derivative for use as an electron acceptor in bulk-heterojunction polymer solar cells10.1016/j.synthmet.2012.01.004 ↗
29. Syntheses, charge separation, and inverted bulk heterojunction solar cell application of phenothiazine-fullerene dyads10.1021/acsami.6b00561 ↗
30. Synthesis and characterization of a novel fullerene derivative for use in organic solar cells10.1016/j.solmat.2010.12.052 ↗
31. Effects of postproduction treatment on plastic solar cells10.1002/adfm.200390011 ↗
32. Aggregation and gelation effects on the performance of poly(3-hexylthiophene)/fullerene solar cells10.1021/ma801368z ↗
33. Enhanced open-circuit voltage in polymer solar cells10.1063/1.3157278 ↗
34. Interplay of optical morphological and electronic effects of ZnO optical spacers in highly efficient polymer solar cells10.1002/aenm.201400805 ↗
35. Solution-processable organic molecule photovoltaic materials with bithienyl-benzodithiophene central unit and indenedione end groups10.1021/cm400782q ↗
36. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
37. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗