journal article·2016-04

Reverse bias degradation of metal wrap through silicon solar cells

M. Barbato, A. Barbato, M. Meneghini, A. Cester, G. Mura, D. Tonini, A. Voltan, G. Cellere, G. Meneghesso

Publisher page

Abstract

Abstract The study of solar cells subjected to reverse biasing is of fundamental importance since the reliability of an entire solar panel can be influenced by the presence of leakage paths on a single solar cell. The particular situation of reverse biasing can occur when, in a module, a solar cell is shadowed and the illuminated solar cells force the generated current through the shadowed solar cell that is reverse biased. The situation is further aggravated by the fact that reverse current crowds in localized shunt paths (“hot spots”) that are related to the presence of semiconductor defects. In this biasing condition the shadowed solar cell acts as a load and it can dissipate tens of watts with the risk of high temperature and damaging of the encapsulating materials. In this paper we study the effects of reverse biasing on metal wrap through (MWT) solar cells. This cell structure is particularly sensitive to reverse-bias, due to the presence of via holes in the junction. The presence of “hot spots” can be related to the through hole metallization pattern: this leads to the conclusion that the MWT production process may strongly affect the reliability of this technology and should be optimized to avoid the formation of parasitic reverse current paths in the crystal structure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Photovoltaic System Optimization Techniques · Photovoltaic Systems and Sustainability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. R. Hoenig, et al., Paste development for screen printed mc-Si MWT solar cells exceeding 17% efficiency, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference (PVSC), June 20–25, 2010, pp. 3167–317210.1109/PVSC.2010.5615956 ↗
2. 20% efficient passivated large-area metal wrap through solar cells on boron-doped Cz silicon10.1109/LED.2011.2167709 ↗
3. M. Hendrichs, et al., Cost-optimized metallization layout for metal wrap through (MWT) solar cells and modules, in: Proceedings of the 28th European PV Solar Energy Conference and Exhibition, Paris, France, 30 September–04 October, 2013.
4. Reverse bias behavior of diffused and screen-printed n-type Cz-Si solar cells10.1109/JPHOTOV.2014.2355034 ↗
5. Influence of shunt resistance on the performance of an illuminated string of solar cells: theory, simulation, and experimental analysis10.1109/TDMR.2014.2347138 ↗
6. A. Compagnin, M. Meneghini, V. Giliberto, M. Barbato, M. Marsili, A. Cester, E. Zanoni, G. Meneghesso, Thermal and electrical characterization of catastrophic degradation of silicon solar cells submitted to reverse current stress, in: Proceedings of the IEEE 39th Photovoltaic Specialists Conference (PVSC), June 16–21, 2013, pp. 1826–183010.1109/PVSC.2013.6744497 ↗
7. H. Ziar, S. Mansourpour, A. Arjhangmehr, A. Salimi, E. Afjei, Analysis of thermal effect on solar cells with considering bypass diodes at shadow condition through binary coding method, in: Proceedings of the 2nd International Conference Electric Power and Energy Conversion Systems (EPECS), 15–17 November, 2011, pp. 1–610.1109/EPECS.2011.6126840 ↗
8. Isolde E. Reis, et al., Effect of impurities on solar cell parameters in intentionally contaminated multicrystalline silicon, in: Proceedings of the 24th European PV Solar Energy Conference, Hamburg, Germany, 21–25 September, 2009.
9. Laser edge isolation for high-efficiency crystalline silicon solar cells10.3938/jkps.55.124 ↗
10. Thermal and electrical investigation of the reverse bias degradation of silicon solar cells10.1016/j.microrel.2013.07.013 ↗
11. C. Sung-Yu, C. Bing-Cyun, H. Chao-Ping, W. Der-Chin, D. Chen-Hsun Du, L. Wen-Haw, C. Chern-Lin Chen, H. Hsiang-Ming, L. Yu-Cheng, S. I-Hsuan, The comparison of MWT solar cell fabrication by two novel and stable approaches, in: Proceedings of the 37th IEEE Photovoltaic Specialists Conference (PVSC), 19–24 June, 2011, pp. 1411–1413.
12. D. Tonini, M. Galiazzo, E. Bortoletto, G. Cellere, A. Baccini, Development of a MWT baseline process, in: Proceedings of the 27th European Photovoltaic Solar Energy Conference and Exhibition, 2012, pp. 1996–2000
13. N. Bateman, D. Tonini, M. Galiazzo, G. Cellere, Ion implanted metal wrap through silicon solar cells, in: Proceedings of the IEEE 39th Photovoltaic Specialists Conference (PVSC), June 16–21, 2013, pp. 1203–120610.1109/PVSC.2013.6744356 ↗
14. M. Barbato, et al., Effect of shunt resistance on the performance of mc-Silicon solar cells: a combined electro-optical and thermal investigation, in: Proceedings of the 38th IEEE Photovoltaic Specialists Conference (PVSC), June 3–8, 2012, pp. 1241–124510.1109/PVSC.2012.6317827 ↗
15. H.J. Solheim, H.G. Fjær, E.A. Sørheim, S.E. Foss, Measurement and simulation of hot spots in solar cells, in: Proceedings of the 3rd International Conference on Crystalline Silicon Photovoltaics (Silicon PV 2013), vol. 38, 2013, pp. 183–18910.1016/j.egypro.2013.07.266 ↗