journal article·2019-09

Modeling of photoactive area spreading in unstructured photovoltaic cells

Mathias Gruber, Vladislav Jovanov, Veit Wagner

Publisher page

Abstract

Abstract In this work the influence of unstructured charge-extraction/transport layers on solar cell photocurrent measurements is investigated. Photovoltaic cells incorporating unstructured conductive layers exhibit a significant amount of photoactive area spreading. This can lead to a large error in determining solar cell short circuit current density and fill factor from I - V measurements. To counteract this effect an analytical model is developed to describe the photoactive area spreading. The developed model requires only solar cell contact geometry and transport layer sheet resistance in order to calculate the spreading current from measured I - V data. Thus total removal of unwanted spreading current from experimental data and calculation of realistic solar cell efficiency is achieved. As an example this model is applied to unstructured metal mesh based organic solar cells, and presented data show that it yields more accurate results compared to the conventional shadow masking approach.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Estimating the manufacturing cost of purely organic solar cells10.1016/j.solener.2009.02.003 ↗
2. A projection of commercial-scale organic photovoltaic module costs10.1016/j.solmat.2013.07.041 ↗
3. The future costs of OPV – a bottom-up model of material and manufacturing costs with uncertainty analysis10.1016/j.solmat.2016.05.056 ↗
4. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
5. Low-cost upscaling compatibility of five different ITO-free architectures for polymer solar cells10.1002/app.39200 ↗
6. Upscaling from single cells to modules – fabrication of vacuum- and ITO-free polymer solar cells on flexible substrates with long lifetime10.1039/C3TC31859A ↗
7. Highly efficient, mechanically flexible, semi-transparent organic solar cells doctor bladed from non-halogenated solvents10.1002/admt.201600184 ↗
8. Design of charge transporting grids for efficient ITO-free flexible up-scaled organic photovoltaics10.1039/C6QM00043F ↗
9. Rapid experimental optimization of organic tandem solar cells: 200 absorber layer thickness combinations on a 4×4 cm 2 substrate10.1039/C8TA00590G ↗
10. High-conductivity poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) film for use in ITO-free polymer solar cells10.1039/b813079e ↗
11. Mechanical flexibility of transparent PEDOT: PSS electrodes prepared by gravure printing for flexible organic solar cells10.1016/j.solmat.2011.07.009 ↗
12. Simple brush-painting of flexible and transparent Ag nanowire network electrodes as an alternative ITO anode for cost-efficient flexible organic solar cells10.1016/j.solmat.2012.07.012 ↗
13. Cyclic potential growth mechanism for electropolymerized polythiophenes as anode buffer layers in P3HT-PCBM solar cells10.1002/pssa.201431059 ↗
14. Modification of a PEDOT: PSS hole transport layer for printed polymer solar cells10.1016/j.solmat.2016.04.023 ↗
15. Solar cell area considerations10.1016/0379-6787(83)90002-9 ↗
16. The perils of solar cell efficiency measurements10.1038/nphoton.2012.119 ↗
17. Characterization of organic solar cells: the importance of device layout10.1002/adfm.200700295 ↗
18. Choice of electrode geometry for accurate measurement of organic photovoltaic cell performance10.1063/1.2895058 ↗
19. How should you measure your excitonic solar cells?10.1039/c2ee03429h ↗
20. Measuring methods of cell performance of dye-sensitized solar cells10.1063/1.1784556 ↗
21. Accurate measurement and characterization of organic solar cells10.1002/adfm.200600489 ↗
22. Photovoltaic characterization of dye-sensitized solar cells: effect of device masking on conversion efficiency10.1002/pip.683 ↗
23. Accurate characterization of OPVs: device masking and different solar simulators10.1016/j.solmat.2012.11.020 ↗
24. A critical look at organic photovoltaic fabrication methodology: defining performance enhancement parameters relative to active area10.1016/j.solmat.2014.07.054 ↗
25. Effects of masking on open-circuit voltage and fill factor in solar cells10.1016/j.joule.2018.10.016 ↗
26. Photovoltaic characterization of concentrator solar cells by localized irradiation10.1063/1.2266161 ↗
27. A facile route to inverted polymer solar cells using a precursor based zinc oxide electron transport layer10.1016/j.orgel.2010.06.002 ↗
28. Measurement protocols for reporting PEDOT thin film conductivity and optical transmission: a critical survey10.1002/macp.201100303 ↗
29. Sze · 2007
30. The theory of p-n junctions in semiconductors and p-n junction transistors10.1002/j.1538-7305.1949.tb03645.x ↗
31. Analytical model (CELIC) for describing organic and inorganic solar cells based on drift-diffusion calculations10.1063/1.4993778 ↗
32. Recombination in polymer-fullerene bulk heterojunction solar cells10.1103/PhysRevB.82.245207 ↗
33. Effect of solvent additive on generation, recombination, and extraction in PTB7: PCBM solar cells: a conclusive experimental and numerical simulation study10.1021/jp512721e ↗
34. Direct visualization of charge-extraction in metal-mesh based OPV cells by light-biased LBIC10.1109/JPHOTOV.2017.2699230 ↗
35. Calibration of solar cells by the reference cell method—the spectral mismatch problem10.1016/0038-092X(82)90244-4 ↗