journal article·2018-12

Simulation of through-cell vias contacts under non-uniform concentrated light profiles

Olivier Richard, Vincent Aimez, Richard Arès, Simon Fafard, Abdelatif Jaouad

Publisher page

Abstract

Abstract Concentrated photovoltaics (CPV) constitute a promising technology to allow solar energy to be competitive in the power generation market. Despite its huge potential, this technology remains hindered by practical issues degrading electrical performances. Among the main limiting factors, light non-uniformity is an important source of energy losses in all CPV systems. Indeed, at the cell level, this non-uniformity induces hot spots, current mismatch between subcells and increased resistive losses. Losses due to non-uniformity have already been studied in the case of common multi-junction solar cells with frontal grid contacts. In this work, we demonstrate that the new architecture based on through-cell vias contacts (TCVC) has a great potential to enhance robustness of CPV cells relative to non-uniformity. Using a simulation approach, we show that under a medium concentration factor (500X) and moderate non-uniformity level, a variant of TCVC cells with metallized cross fingers (CF-TCVC) undergoes almost no degradation of its performances. Even under highly non-uniform light, the CF-TCVC cell efficiency degradation is less than 0.7 % abs while this degradation reaches 1.6 % abs for an equivalent standard grid cell. The advantage of the TCVC architecture becomes even more significant under highly concentrated light (2000X) as the efficiency degradation of these cells is 1.2 % abs lower than for standard cells. We demonstrate that the better behavior of TCVC cells under non-uniform light could be explained by their more evenly polarized surface, indicating lower resistive losses and a better collection of current.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: solar cell performance optimization · Silicon and Solar Cell Technologies · Photovoltaic System Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Non-uniform illumination in concentrating solar cells10.1016/j.rser.2012.06.020 ↗
2. Characterization of the spatial distribution of irradiance and spectrum in concentrating photovoltaics systems and their effect on multi-junction solar cells10.1002/pip.1183 ↗
3. Analysis of chromatic aberration effects in triple-junction solar cells using advanced distributed models10.1109/JPHOTOV.2011.2171671 ↗
4. Enhanced efficiencies for high-concentration, multijunction PV systems by optimizing grid spacing under nonuniform illumination
5. Effect of non-uniform illumination and temperature distribution on concentrating solar cells – a review10.1016/j.energy.2017.12.067 ↗
6. Many-junction photovoltaic device performance under non-uniform high-concentration illumination10.1063/1.5001438 ↗
7. Concentrating optical system optimization for 3- and 4-junction solar cells: impact of illumination profiles10.1117/1.JPE.7.014501 ↗
8. CPV solar cell modeling and metallization optimization10.1016/j.solener.2017.11.015 ↗
9. I. Garcìa, C. Algora, I. Rey-Stolle, B. Galiana, Study of non-uniform light profiles on high concentration III-V solar cells using quasi-3D distributed models, in: Proceedings of the 33rd Photovoltaic Specialists Conference (PVSC), IEEE, 2008, pp. 1–6.10.1109/PVSC.2008.4922908 ↗
10. Evaluation of InGaP/InGaAs/Ge triple-junction solar cell under concentrated light by simulation program with integrated circuit emphasis10.1143/JJAP.43.882 ↗
11. A two-dimensional finite element model of front surface current flow in cells under non-uniform, concentrated illumination10.1016/j.solener.2009.03.016 ↗
12. Simulation of a through cell vias contacts architecture for HCPV multi-junction solar cells10.1016/j.solmat.2015.08.032 ↗
13. Plasma etching applications in concentrated photovoltaic cell fabrication10.1063/1.4962091 ↗
14. Via sidewall insulation for through cell via contacts10.1063/1.5001424 ↗
15. III-V multi-junction solar cell using metal wrap through contacts10.1063/1.4962094 ↗
16. GaInP/AlGaAs metal-wrap-through tandem concentrator solar cells10.1002/pip.2844 ↗
17. Evaluation of InGaP/InGaAs/Ge triple-junction solar cell and optimization of solar cell's structure focusing on series resistance for high-efficiency concentrator photovoltaic systems10.1016/j.solmat.2005.08.003 ↗
18. Structural optimization for single junction InGaP solar cells10.1016/0927-0248(94)90118-X ↗
19. T. Takamoto, E. Ikeda, H. Kurita, M. Ohmori, M. Yamaguchi, M.-J. Yang, Two-terminal monolithic In0.5Ga0.5 P/GaAs tandem solar cells with a high conversion efficiency of over 36 (10R), 1997, p. 6215.10.1143/JJAP.36.6215 ↗
20. High efficiency and high concentration in photovoltaics10.1109/16.792009 ↗
21. Super high-efficiency multi-junction and concentrator solar cells10.1016/j.solmat.2006.06.028 ↗
22. Empirical low-field mobility model for III-V compounds applicable in device simulation codes10.1063/1.372274 ↗
23. Electrical TCAD simulations of a germanium pMOSFET technology10.1109/TED.2010.2060726 ↗
24. Equivalent circuit models for triple-junction concentrator solar cells10.1016/j.solmat.2011.10.013 ↗
25. A 3-D model for concentrator solar cells based on distributed circuit units10.1109/TED.2005.859620 ↗