journal article·2015-09Open access

Gas expanded polymer process to anneal nanoparticle dispersion in thin films

Preejith V. Ambuken, Holly A. Stretz, Mark Dadmun, S. Michael Kilbey

Abstract

Abstract Organic photovoltaic (OPV) active layers made by spin-coating a solution comprising poly(3-hexylthiophene) (P3HT) and phenyl-C61-butyric acid methyl ester (PCBM) nanoparticles have been shown to adopt a non-uniform concentration profile across the thin film dimension. This inhomogeneous distribution can reduce the efficiency of the device. In the present work a new process, gas expanded polymer (GXP) annealing, is applied to P3HT/PCBM thin film blends, enabling the distribution of the PCBM nanoparticles to be manipulated by varying the GXP processing conditions. Films of 50 nm thickness (nominally) created by spin casting a blend of P3HT mixed with PCBM were annealed by oscillatory GXP and GXP at constant pressure using high pressure CO2. An increase in P3HT crystallinity (detected by X-ray diffraction and UV–vis spectroscopy) along with a more uniform distribution of PCBM nanoparticles in the thickness dimension, as interpreted from neutron reflectivity measurements, were observed after oscillatory GXP annealing. In addition, static water contact angles suggest that the film/air interface is enriched in PCBM relative to the as-cast film. These results demonstrate that GXP annealing, which is commercially scalable, can be successfully used to create a uniform distribution of PCBM nanoparticles across the thickness dimension in a P3HT thin film.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Organic Light-Emitting Diodes Research · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. A polymer tandem cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
2. Organic solar cells: an overview10.1557/JMR.2004.0252 ↗
3. A new model for the morphology of P3HT/PCBM organic photovoltaics from small-angle neutron scattering: rivers and streams10.1021/nn200744q ↗
4. Depletion of PCBM at the cathode interface in P3HT/PCBM thin films as quantified via neutron reflectivity measurements10.1002/adma.200903971 ↗
5. The miscibility and depth profile of PCBM in P3HT: thermodynamic information to improve organic photovoltaics10.1039/c2cp40466d ↗
6. The impact of controlled solvent exposure on the morphology, structure and function of bulk heterojunction solar cells10.1016/j.solmat.2012.07.014 ↗
7. Free energy control of charge photogeneration in polythiophene/fullerene solar cells: the influence of thermal annealing on P3HT/PCBM blends10.1002/adfm.200800727 ↗
8. Effects of active layer thickness and thermal annealing on polythiophene: fullerene bulk heterojunction photovoltaic devices10.1063/1.3474654 ↗
9. Investigation of nanoscale morphological changes in organic photovoltaics during solvent vapor annealing10.1039/B713926H ↗
10. Precise construction of PCBM aggregates for polymer solar cells via multi-step controlled solvent vapor annealing10.1039/B917533D ↗
11. Solvent-vapor treatment induced performance enhancement of poly (3-hexylthiophene): methanofullerene bulk-heterojunction photovoltaic cells10.1063/1.2434173 ↗
12. Controlling the morphology and performance of bulk heterojunctions in solar cells. Lessons learned from the benchmark poly(3-hexylthiophene):[6,6]=phenyl-C61-butyric acid metyl ester sytem10.1021/cr300005u ↗
13. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
14. Influence of electronic transport properties of polymer‐fullerene blends on the performance of bulk heterojunction photovoltaic devices10.1002/pssa.200404333 ↗
15. Effect of temperature on the morphological and photovoltaic stability of bulk heterojunction polymer: fullerene solar cells10.1016/j.solmat.2008.01.006 ↗
16. Effect of annealing solvent solubility on the performance of poly (3-hexylthiophene)/methanofullerene solar cells10.1021/jp9029562 ↗
17. Nanoparticle concentration profile in polymer-based solar cells10.1039/B920979D ↗
18. Substrate-dependent interface composition and charge transport in films for organic photovoltaics10.1063/1.3149706 ↗
19. A review of CO2 applications in the processing of polymers10.1021/ie030199z ↗
20. Dense gas processing of polymers10.1080/15583721003698846 ↗
21. The future of carbon dioxide for polymer processing in tissue engineering10.1089/ten.teb.2012.0361 ↗
22. Roll-to-roll fabrication of large are functional organic materials10.1002/polb.23192 ↗
23. Colloids in supercritical fluids over the last 20 years and future directions10.1016/j.supflu.2008.10.024 ↗
24. Tunable solvation effects on the size-selective fractionation of metal nanoparticles in CO2 gas-expanded solvents10.1021/jp0547008 ↗
25. Finely controlled size-selective precipitation and separation of CdSe/ZnS semiconductor nanocrystals using CO2-gas-expanded liquids10.1021/la700325z ↗
26. Thermodynamic analysis of nanoparticle size selective fractionation using gas-expanded liquids10.1021/ie070981p ↗
27. Gold nanoparticle deposition using CO2 expanded liquids: effect of pressure oscillation and surface−particle interactions10.1021/la801618m ↗
28. An alternative processing strategy for organic photovoltaic devices using a supercritical fluid10.1021/jp304976x ↗
29. Hydration in weak polyelectrolyte brushes10.1021/mz300615v ↗
30. 〈www.ncnr.nist.gov/resources/activation〉.
31. X-ray structural studies of poly (3-alkylthiophenes): an example of an inverse comb10.1021/ma00043a019 ↗
32. Influence of the solvent on the crystal structure of PCBM and the efficiency of MDMO-PPV: PCBM ‘plastic’ solar cells10.1039/B305988J ↗
33. Morphological origin for the stratification of P3HT:PCBM blend film studied by neutron relectrometry10.1063/1.4836035 ↗
34. Phase separatio-driven stratification in conventional and inverted P3HT:PCBM organic solar cells10.1016/j.orgel.2013.02.020 ↗
35. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
36. Investigation of annealing effects and film thickness dependence of polymer solar cells based on poly (3-hexylthiophene)
37. The impact of controlled solvent exposure on the morphology, structure and function of bulk heterojunction solar cells10.1016/j.solmat.2012.07.014 ↗
38. Directed self-assembly of nanoparticles at the polymer surface by highly compressible supercritical carbon dioxide10.1039/c1sm05693j ↗
39. The role of elasticity in the anomalous swelling of polymer thin films in density fluctuating supercritical fluids10.1021/ma021265w ↗