Enhanced lifetime of organic photovoltaic diodes achieved by blending with PMMA: Impact of morphology and Donor:Acceptor combination
Source abstract
Abstract
Abstract In order to realise the potential of organic photovoltaic devices (OPVs) to provide cheap, scalable access to renewable energy, it is necessary to improve their lifetime and cost of encapsulation. The aim of this work is to achieve these aims by blending the donor and acceptor with the commodity polymer, PMMA, to form a ternary blend device with enhanced lifetime. We find that ternary OPV devices prepared in this manner can have up to double the lifetime of the binary control devices to an extent that depends upon the PMMA morphology and the processing additives used. Further, we find that the initial performance of ternary OPVs may decrease (in the case of PTB7-based blends) or slightly increase (in the case of P3HT-based blends) when compared to their binary counterparts, which is hypothesised to be due to donor compatibility with the PMMA. These findings suggest that this approach can be employed in other OPV blend systems and give design rules to maximise the positive impact on device lifetime.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Enhanced lifetime of organic photovoltaic diodes utilizing a ternary blend including an insulating polymer10.1016/j.solmat.2016.10.018 ↗
2. Haegel · Terawatt-scale photovoltaics: Trajectories and challenges · 2017 · 356 · 141
3. Foundation
4. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
5. Report
6. 18% Efficiency organic solar cells10.1016/j.scib.2020.01.001 ↗
7. Current status of outdoor lifetime testing of organic photovoltaics10.1002/advs.201800434 ↗
8. Effects of long-term UV–visible light irradiation in the absence of oxygen on P3HT and P3HT:PCBM blend10.1016/j.solmat.2010.03.012 ↗
9. Photochemical stability of high efficiency PTB7:PC70BM solar cell blends10.1039/C4TA05641H ↗
10. Photostability of organic materials used in polymer solar cells10.1002/pi.4656 ↗
11. The mechanism of photo- and thermooxidation of poly(3-hexylthiophene) (P3HT) reconsidered10.1016/j.polymdegradstab.2009.03.005 ↗
12. Comparative indoor and outdoor stability measurements of polymer based solar cells10.1038/s41598-017-01505-w ↗
13. New insights into the mechanisms of photodegradation/stabilization of P3HT:PCBM active layers using poly(3-hexyl-d13- Thiophene)10.1021/cm402193y ↗
14. Analysing impact of oxygen and water exposure on roll-coated organic solar cell performance using impedance spectroscopy10.1016/j.solmat.2017.10.028 ↗
15. Effects of water vapor and oxygen on non-fullerene small molecule acceptors10.1039/C8TC05475D ↗
16. High efficiency polymer solar cells with long operating lifetimes10.1002/aenm.201100138 ↗
17. Stability study of high efficiency polymer solar cells using TiOx as electron transport layer10.1016/j.solener.2017.04.013 ↗
18. Multiple stress degradation analysis of the active layer in organic photovoltaics10.1016/j.solmat.2013.10.016 ↗
19. Progress in understanding degradation mechanisms and improving stability in organic photovoltaics10.1002/adma.201603940 ↗
20. Compatibility of PTB7 and PC71BM as a key factor for the stability of PTB7:PC71BM solar cells10.1002/aenm.201502338 ↗
21. Oxygen doping of P3HT:PCBM blends: influence on trap states, charge carrier mobility and solar cell performance10.1016/j.orgel.2010.07.016 ↗
22. Analysis of the failure mechanism for a stable organic photovoltaic during 10 000 h of testing10.1002/pip.794 ↗
23. Mechanisms of vapor permeation through multilayer barrier films: lag time versus equilibrium permeation10.1063/1.1768610 ↗
24. The effect of anneal, solar irradiation and humidity on the adhesion/cohesion properties of P3HT: PCBM based inverted polymer solar cells
25. Recent advances to understand morphology stability of organic photovoltaics10.1007/s40820-016-0107-3 ↗
26. Electron barrier formation at the organic-back contact interface is the first step in thermal degradation of polymer solar cells10.1002/adfm.201304166 ↗
27. Study of conformational change of P3HT chains using in-situ polarized Raman spectroscopy10.1021/am200760m ↗
28. Organic light-emitting devices with extended operating lifetimes on plastic substrates10.1063/1.1514831 ↗
29. Al2O3/ZrO2 nanolaminates as ultrahigh gas-diffusion barriers—a strategy for reliable encapsulation of organic
30. Materials and methods for encapsulation of OPV: a review10.1016/j.rser.2013.06.027 ↗
31. Definition of encapsulation barrier requirements: a method applied to organic solar cells10.1016/j.solmat.2011.01.035 ↗
32. Cost analysis of roll-to-roll fabricated ITO free single and tandem organic solar modules based on data from manufacture10.1039/C4EE01222D ↗
33. Effect of hygroscopicity of insulating unit of polymer composites on their response to relative humidity10.1149/1.1393320 ↗
34. The dependence of the cathode architecture on the photoactive layer morphology in bulk-heterojunction polymeric solar cells10.1088/0268-1242/29/12/125011 ↗
35. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
36. Gwyddion
37. Semiconducting: insulating polymer blends for optoelectronic applications-a review of recent advances10.1039/C4TA01065E ↗
38. Are hot charge transfer states the primary cause of efficient free-charge generation in polymer:fullerene organic photovoltaic devices? A kinetic Monte Carlo study10.1039/C4CP01626B ↗
39. Mandoc · 2007 · 17 · 2167
40. Effect of charge trapping on geminate recombination and polymer solar cell performance10.1021/nl100080r ↗
41. Water and oxygen induced degradation of small molecule organic solar cells10.1016/j.solmat.2011.01.001 ↗
42. Formation of bubbles on electrical contacts to polymer light-emitting diode devices10.1016/j.tsf.2004.10.039 ↗
43. Morphological change in the degradation of Al electrode surfaces of electroluminescent devices by fluorescence microscopy and AFM10.1016/0040-6090(95)06781-7 ↗
44. A window to trap-free charge transport in organic semiconducting thin films10.1038/s41563-019-0473-6 ↗
45. General rule for the energy of water-induced traps in organic semiconductors10.1038/s41563-019-0347-y ↗
46. High sensitivity organic photodiodes with low dark currents and increased lifetimes10.1016/j.orgel.2008.01.007 ↗
47. Multicomponent semiconducting polymer systems with low crystallization-induced percolation threshold10.1038/nmat1779 ↗
48. Universal strategy for Ohmic hole injection into organic semiconductors with high ionization energies10.1038/s41563-018-0022-8 ↗
49. Absolute measurement of domain composition and nanoscale size distribution explains performance in PTB7:PC71BM solar cells10.1002/aenm.201200377 ↗
50. For the bright future-bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
51. Nanoscale morphology of PTB7 based organic photovoltaics as a function of fullerene size10.1038/srep30915 ↗
52. XPS analysis of the chemical degradation of PTB7 polymers for organic photovoltaics10.1016/j.orgel.2016.10.016 ↗
53. Shah · 2018 · 16462 · 1
54. Influence of PC60BM or PC70BM as electron acceptor on the performance of polymer solar cells10.1016/j.solmat.2011.09.006 ↗
55. Stability and reliability of PTB7:PC71BM and PTB7:PC61BM inverted organic solar cells: a comparative study10.1109/JPHOTOV.2018.2874952 ↗
56. A ternary blend of a polymer, fullerene, and insulating self-assembling triptycene molecules for organic photovolatics10.1039/C6TA07705F ↗
57. Molecular order in high-efficiency polymer-fullerene bulk heterojunction solar cells10.1021/nn202951e ↗
58. Visualizing nanoscale phase morphology for understanding photovoltaic performance of PTB7: PC71BM solar cell10.1016/j.apsusc.2017.05.205 ↗
59. Organic semiconductor:insulator polymer ternary blends for photovoltaics10.1002/adma.201102100 ↗
60. Insulating polymer additives in small molecule and polymer photovoltaics: how they are tolerated and their use as potential interlayers10.1039/C7TC00525C ↗
61. Remove the residual additives toward enhanced efficiency with higher reproducibility in polymer solar cells10.1021/jp404395q ↗
62. Air-processed polymer tandem solar cells with power conversion efficiency exceeding 10%10.1039/C5EE02145F ↗