journal article·2015-05

Degradation behaviors of EVA encapsulant and AZO films in Cu(In,Ga)Se2 photovoltaic modules under accelerated damp heat exposure

Dong-Won Lee, Won-Ju Cho, Jun-Kwang Song, Jun-Tae Lee, Chi-Hong Park, Kyung-Eun Park, Heesoo Lee, Yong-Nam Kim

Publisher page

Abstract

Abstract This paper focuses on the degradation behavior of ethylene vinyl acetate (EVA) and Al-doped ZnO (AZO) films in CIGS PV modules after the damp heat test. We observed losses of the FF and efficiency in the modules after 1000 h of damp heat (DH) exposure and some of them were discolored from the outside edge and the center. To clarify the degradation behavior of the non-discolored and discolored modules, a failure analysis for each position of the EVA and AZO in the CIGS module films from the edge to the center was performed. The resistivity of the AZO films in the non-discolored modules increased due to the adsorption of oxygen. In discolored modules, the resistivity of the AZO films rapidly increased at the edge region, and the morphologies of the AZO films were also changed due to the chemical degradation of EVA. These degradation behaviors of the AZO films and EVA in discolored modules were attributed to the formation of hydroxyl and carboxylic species caused by water penetration. Moreover, we reported that the transmittance and the mechanical properties of EVA after 1000 h DH exposure were deteriorated by water molecules.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Photovoltaic System Optimization Techniques · ZnO doping and properties · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Accelerated testing and failure of thin-film PV modules10.1002/pip.526 ↗
2. History of accelerated and qualification testing of terrestrial photovoltaic modules: a literature review10.1002/pip.861 ↗
3. Life prediction for CIGS solar modules part2: degradation kinetics, accelerated testing, and encapsulant effects
4. International Standard IEC 61646, 2008. Thin-film terrestrial photovoltaic (PV) modules—design qualification and Type approval. Edition 2.0.
5. RF magnetron sputtered ZnO:Al thin films on glass substrates: a study of damp heat stability on their optical and electrical properties10.1016/j.solmat.2007.07.008 ↗
6. Damp heat stability and annealing behavior of aluminum doped zinc oxide films prepared by magnetron sputtering10.1016/j.tsf.2005.12.130 ↗
7. Quantitative analyses of damp-heat-induced degradation in transparent conducting oxides10.1016/j.solmat.2013.12.014 ↗
8. Improving the damp-heat stability of copper indium gallium diselenide solar cells with a semicrystalline tin dioxide overlayer10.1016/j.solmat.2012.02.017 ↗
9. Influence of damp heat testing on the electrical characteristics of Cu(In,Ga)(S,Se)2 solar cells10.1016/S0040-6090(01)01511-5 ↗
10. Microdefects and point defects optically detected in Cu(In,Ga)Se2 thin film solar cells exposed to the damp and heating10.1016/S0927-0248(02)00122-8 ↗
11. The change of the electronic properties of CIGS devices induced by the ‘damp heat’ treatment10.1016/S0040-6090(01)01510-3 ↗
12. Encapsulation of PV modules using ethylene vinyl acetate copolymer as a pottant: a critical review10.1016/0927-0248(95)00150-6 ↗
13. Effects of ZnO:Al films on CIGS PV modules degraded under accelerated damp heat10.1016/j.solmat.2012.05.002 ↗
14. Failure analysis of Cu(In,Ga)Se2 photovoltaic modules: degradation mechanism of Cu(In,Ga)Se2 solar cells under harsh environmental conditions
15. Thermal stability of slow and fast cure EVA encapsultant material for photovoltaic module manufacturing process10.1016/j.solmat.2006.03.023 ↗
16. Aspects of the thermal oxidation of ethylene vinyl acetate copolymer10.1016/S0141-3910(00)00020-3 ↗
17. Thermal degradation studies of electron beam cured ethylene-vinyl acetate copolymer10.1016/0141-3910(95)00125-6 ↗
18. Degradation and stabilization of poly(ethylene-stat-vinyl acetate): 1−spectroscopic and rheological examination of thermal and thermo-oxidative degradation mechanisms10.1016/j.polymdegradstab.2005.04.034 ↗
19. Factors that affect the EVA encapsulant discoloration rate upon accelerated exposure10.1016/0927-0248(95)00128-X ↗
20. Photothermal stability of encapsulated Si solar cells and encapsulation materials upon accelerated exposures10.1016/S0927-0248(99)00108-7 ↗
21. Moisture transport, adhesion, and corrosion protection of PV module packaging materials10.1016/j.solmat.2006.04.003 ↗
22. Optical degradation of long-term, field-aged c-Si photovoltaic modules10.1016/j.solmat.2004.08.006 ↗
23. Experimental characterization and simulation of water vapor diffusion through various encapsulants used in PV modules10.1016/j.solmat.2013.04.007 ↗
24. The effect of damp-heat and UV aging tests on the optical properties of silicone and EVA encapsulants10.1002/pip.1025 ↗
25. Effect of damp-heat aging on the structures and properties of ethylene-vinyl acetate copolymers with different vinyl acetate contents
26. CIGS absorbers and processes10.1002/pip.969 ↗
27. Preconditioning of thin-film PV module technologies for calibration
28. High-efficiency thin-film silicon solar cells with improved light-soaking stability10.1002/pip.2300 ↗
29. Low cost high-efficiency amorphous silicon solar cells with improved light-soaking stability10.1016/j.solmat.2011.11.023 ↗
30. Thin-film CIGS PV modules with more than 3000h damp heat stability: breakthrough time property of the B-dry edge sealant and its characterization10.1016/j.solmat.2011.11.007 ↗
31. F.J. Pern, R. noufi, X. Li, C. DeHart, B. To, Damp-heat induced degradation of transparent conducting oxides for thin-film solar cells, in: Proceedings of the 33rd IEEE Photovoltaic Specialists Conference, 2008, p. 1–6.10.1109/PVSC.2008.4922491 ↗
32. Damp heat stability and annealing behavior of aluminum doped zinc oxide films prepared by magnetron sputtering10.1016/j.tsf.2005.12.130 ↗
33. RF magnetron sputtered ZnO:Al thin films on glass substrates: a study of damp heat stability on their optical and electrical properties10.1016/j.solmat.2007.07.008 ↗
34. Effect of hydrogen plasma treatment on transparent conducting oxides10.1063/1.97598 ↗
35. Investigations on solution derived aluminum doped zinc oxide thin films10.1016/S0921-5107(03)00128-4 ↗
36. Electronic granularity and the work function of transparent conducting ZnO:Al thin films10.1002/adfm.201101069 ↗
37. Systmatic XPS studies of metal oxides, hydroxides and peroxides10.1039/a908800h ↗
38. Moduler · 1992
39. Surface hydroxylation at a Zn(0001)–O surface10.1016/0039-6028(82)90403-4 ↗
40. Investigation of the degradation and stabilization of EVA-based encapsulant in field-aged solar energy modules10.1016/S0141-3910(96)00162-0 ↗
41. Chemical degradation of the encapsulation system in flexible PV panel as revealed by infrared and Raman microscopies10.1016/j.solmat.2013.10.033 ↗
42. Oxidative degradation of EVA copolymers in the presence of MCM-4110.1016/j.jaap.2005.10.004 ↗
43. Oxidative degradation of EVA copolymers in the presence of catalysts10.1007/s10973-005-7441-x ↗