journal article·2014-09

Implications of the device structure on the photo-stability of organic solar cells

Graeme Williams, Hany Aziz

Publisher page

Abstract

Abstract Small molecule organic solar cells (OSCs) are systematically studied for their photo-stability in an inert N 2 environment. In this work, 28-day dark, light-stress and heat-stress experiments are conducted on OSCs with strongly varied mixing ratios. Comparisons are made between the emerging, high performance Schottky device structure and the more widely studied (standard) BHJ structure. In both structures, light stress experiments result in a 10–15% loss in power conversion efficiency. Simultaneous heat-stress experiments demonstrate that these variations are not related to thermally induced changes. Photo-induced losses in open circuit voltages are observed for both device structures and are attributed to organic-electrode degradation. However, variations in the other photovoltaic parameters are more strongly dependent on the active layer composition and associated device structure. Schottky OSCs are shown to be slightly more resilient to variations in short circuit current compared to standard BHJ OSCs, but they suffer from losses in fill factor. Microsecond transient photocurrent and external quantum efficiency measurements are employed to show that these fill factor losses are due to increased recombination, associated with increased trap density by the exciton-induced degradation of the C 60 acceptor. This effect may be problematic for all Schottky OSCs due to their use of mixed layers with very high C 60 content. The choice of device architecture is thus shown to alter degradation mechanisms, and so it can have implications on the overall OSC photo-stability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Molecular Junctions and Nanostructures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Krebs · 2012
2. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
3. Lifetimes of organic photovoltaics: using TOF-SIMS and O-18(2) isotopic labelling to characterise chemical degradation mechanisms10.1016/j.solmat.2005.03.004 ↗
4. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
5. Water and oxygen induced degradation of small molecule organic solar cells10.1016/j.solmat.2011.01.001 ↗
6. Interlaboratory outdoor stability studies of flexible roll-to-roll coated organic photovoltaic modules: Stability over 10,000h10.1016/j.solmat.2013.04.024 ↗
7. Water ingress into and climate dependent lifetime of organic photovoltaic cells investigated by calcium corrosion tests10.1016/j.solmat.2013.10.023 ↗
8. Stability of polymer solar cells10.1002/adma.201104187 ↗
9. Degradation mechanisms in organic photovoltaic devices10.1016/j.orgel.2011.11.027 ↗
10. Interfacial degradation in organic optoelectronics10.1039/c2ra22770c ↗
11. TOF-SIMS investigation of degradation pathways occurring in a variety of organic photovoltaic devices–the ISOS-3 inter-laboratory collaboration10.1039/c2cp41787a ↗
12. Investigation of the degradation mechanisms of a variety of organic photovoltaic devices by combination of imaging techniques—the ISOS-3 inter-laboratory collaboration10.1039/c2ee03508a ↗
13. The ISOS-3 inter-laboratory collaboration focused on the stability of a variety of organic photovoltaic devices10.1039/C1RA00686J ↗
14. On the stability of a variety of organic photovoltaic devices by IPCE and in-situ IPCE analyses-The ISOS-3 inter-laboratory collaboration10.1039/c2cp40821j ↗
15. Light-induced degradation of the active layer of polymer-based solar cells10.1016/j.polymdegradstab.2009.11.021 ↗
16. Multiple stress degradation analysis of the active layer in organic photovoltaics10.1016/j.solmat.2013.10.016 ↗
17. Long-term operational lifetime and degradation analysis of P3HT: PCBM photovoltaic cells10.1016/j.solmat.2010.09.007 ↗
18. Photo-degradation of the indium tin oxide (ITO)/organic interface in organic optoelectronic devices and a new outlook on the role of ITO surface treatments and interfacial layers in improving device stability10.1016/j.orgel.2012.06.017 ↗
19. Photochemical deterioration of the organic/metal contacts in organic optoelectronic devices10.1063/1.4752252 ↗
20. The effect of charge extraction layers on the photo-stability of vacuum-deposited versus solution-coated organic solar cells10.1016/j.orgel.2013.10.017 ↗
21. The Photo‐stability of polymer solar cells: contact photo‐degradation and the benefits of interfacial layers10.1002/adfm.201202567 ↗
22. Organic Schottky barrier photovoltaic cells based on MoOx C6010.1063/1.3415497 ↗
23. Bulk heterojunction photovoltaic cells with low donor concentration10.1002/adma.201102173 ↗
24. Solution‐processed fullerene‐based organic Schottky junction devices for large‐open‐circuit‐voltage organic solar cells10.1002/adma.201203080 ↗
25. Role of the donor material and the donor–acceptor mixing ratio in increasing the efficiency of Schottky junction organic solar cells10.1016/j.orgel.2013.06.001 ↗
26. S. Sutty, G. Williams, H. Aziz, New insights into charge extraction and formation of the band-bending region in Schottky junction organic solar cells, in: Proceedings of the SPIE Organic Photonics+ Electronics, International Society for Optics and Photonics, 2013, pp. 88300.10.1117/12.2023416 ↗
27. Renewed interest in metal phthalocyanine donors for small molecule organic solar cells10.1016/j.solmat.2014.02.013 ↗
28. Highly efficient bulk heterojunction photovoltaic cell based on tris [4-(5-phenylthiophen-2-yl) phenyl] amine and C70 combined with optimized electron transport layer10.1063/1.4801954 ↗
29. X. Xiao, K.J. Bergemann, J.D. Zimmerman, K. Lee, S.R. Forrest, Small‐molecule planar‐mixed heterojunction photovoltaic cells with fullerene‐based electron filtering buffers. Adv. Energy Mater. (2013).10.1002/aenm.201301557 ↗
30. A hybrid planar-mixed tetraphenyldibenzoperiflanthene/C 70 photovoltaic cell10.1063/1.4793195 ↗
31. A simple parallel tandem organic solar cell based on metallophthalocyanines10.1063/1.3579250 ↗
32. Photovoltaic properties of M-phthalocyanine/fullerene organic solar cells10.1016/j.solener.2012.03.019 ↗
33. G. Williams, H. Aziz, Insights into electron and hole extraction layers for upright and inverted vacuum-deposited small molecule organic solar cells, in: Proceedings of the SPIE Organic Photovoltaics XIV, 2013, pp. 88301.10.1117/12.2023724 ↗
34. MoOx for efficient and stable organic solar cells10.1021/am201825t ↗
35. Enhanced extraction rates through gap states of molybdenum oxide anode buffer10.1021/jp3114013 ↗
36. Origin of hole selectivity and the role of defects in low-temperature solution-processed molybdenum oxide interfacial layer for organic solar cells10.1021/jp303679y ↗
37. Exciton-induced degradation of organic/electrode interfaces in ultraviolet organic photodetectors10.1016/j.orgel.2013.09.013 ↗
38. Intrinsic burn-in efficiency loss of small-molecule organic photovoltaic cells due to exciton-induced trap formation10.1016/j.solmat.2013.08.006 ↗
39. Photodegradation of small-molecule organic photovoltaics10.1016/j.solmat.2014.03.005 ↗
40. C60 degrades to C120O10.1039/a806726k ↗
41. Aging of flat heterojunction zinc phthalocyanine/fullerene C60 organic solar cells10.1016/j.orgel.2009.12.010 ↗
42. Photoinduced degradation of polymer and polymer–fullerene active layers: experiment and theory10.1002/adfm.201001079 ↗
43. Linking vertical bulk-heterojunction composition and transient photocurrent dynamics in organic solar cells with solution-processed MoOx contact layers
44. Investigation of driving forces for charge extraction in organic solar cells: transient photocurrent measurements on solar cells showing S-shaped current–voltage characteristics10.1002/aenm.201200931 ↗
45. Drift-diffusion modeling of photocurrent transients in bulk heterojunction solar cells10.1063/1.3247547 ↗
46. Comparison of the operation of polymer/fullerene, polymer/polymer, and polymer/nanocrystal solar cells: a transient photocurrent and photovoltage study10.1002/adfm.201002154 ↗
47. The roles of traps in the energy loss for aged organic solar cells: a transient photovoltage study10.1016/j.orgel.2012.12.009 ↗
48. Photodegradation in encapsulated silole‐based polymer: PCBM solar cells investigated using transient absorption spectroscopy and charge extraction measurements10.1002/aenm.201300337 ↗
49. Mixed donor–acceptor molecular heterojunctions for photovoltaic applications. I. Material properties10.1063/1.2142072 ↗
50. Interplay between efficiency and device architecture for small molecule organic solar cells10.1039/c4cp01295j ↗