journal article·2011-07

Photochemical “Self-healing” pyrrole based treatment of CdS/CdTe photovoltaics

Dominik K. Koll, Ahmad H. Taha, Dean M. Giolando

Publisher page

Abstract

Abstract An improved post-deposition treatment for CdS/CdTe photovoltaic devices has been developed. Aqueous solutions containing pyrrole and sodium chloride provide a treatment of the CdTe surface when the device is illuminated with visible light. Evaporating gold metal on the CdTe surface completes the device structure. Comparison of the JV characteristics of the device treated with illumination to those not illuminated reveals a significant enhancement in device output. While most of the electronic properties ( J sc , FF , R s and R sh ) are very similar the V oc for the treated sample is higher (circa 0.79 V versus 0.71 V) leading to a higher efficiency of 12.3% for the treated cell versus 11.0% for the untreated cell. The performance of this treatment is very much the same as that observed when the photochemically induced treatment employs aniline, the benefit of the herein described method is the decreased level of toxicity associated with pyrrole relative to that of aniline. Characterization of the CdTe surface with SEM does not reveal any noticeable features and could be interpreted as indicating that treatment leads to a very thin coating of material. The GIXRD data reveal the presence of elemental tellurium on the surface of the CdTe.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. Clean electricity from photovoltaics
2. Processing options for CdTe thin film solar cells10.1016/j.solener.2004.04.012 ↗
3. A study of the back contacts on CdTe/CdS solar cells10.1016/S0040-6090(99)00842-1 ↗
4. Characterization of etching procedure in preparation of CdTe solar cells10.1016/0927-0248(96)00053-0 ↗
5. Understanding Aniline Surface Treatment of CdTe10.1557/PROC-865-F8.2 ↗
6. Effects of postdeposition treatments on surfaces of CdTe/CdS solar cells,10.1063/1.3505155 ↗
7. Blocking thin-film nonuniformities: photovoltaic self-healing10.1063/1.1644049 ↗
8. Materials Safety Data Sheet for aniline, 〈http://www.sciencelab.com/xMSDS-Aniline-9927435〉, Last accessed December 7, 2010.
9. Electroless Ni and NiTe2 ohmic contacts for CdTe/CdS PV cells10.1016/S0040-6090(00)01738-7 ↗
10. Factors affecting the stability of CdTe/CdS solar cells deduced from stress tests at elevated temperature10.1002/adfm.200304259 ↗
11. Diffusion and influence of Cu on properties of CdTe thin films and CdTe/CdS cells10.1016/j.solmat.2004.05.007 ↗
12. Stability of CdTe/CdS thin-film solar cells10.1016/S0927-0248(00)00014-3 ↗
13. Effects of the Au/CdTe back contact on IV and CV characteristics of Au/CdTe/CdS/TCO solar cells10.1063/1.363946 ↗