journal article·2011-12

Size-dependent behavior of polymer solar cells measured under partial illumination

Dong Gao, Dwight S. Seferos

Publisher page

Abstract

Abstract We systemically investigate the size-dependent behavior of organic photovoltaics (OPVs) tested under partial illumination. An illumination mask was hypothesized to limit uncertainty associated with device size and illumination conditions when measurements are conducted on laboratory scales. Introducing the illumination mask into the measurement improves the accuracy of J SC ; however partial illumination will result in a decrease in V OC and an increase in FF. This last observation is explained by diodes contributing both light and dark currents in the measurement. In addition to loss due to the energy required to separate bound excitons, these results suggest that non-optimized photo–dark current ratio could be another reason why measured V OC is less than ideal V OC .
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. A life cycle analysis of polymer solar cell modules prepared using roll-to-roll methods under ambient conditions10.1016/j.solmat.2010.08.020 ↗
2. Manufacture, integration and demonstration of polymer solar cells in a lamp for the “Lighting Africa” initiative10.1039/b918441d ↗
3. Polymer–fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
4. Device physics of polymer–fullerene bulk heterojunction solar cells10.1002/adma.200601093 ↗
5. Accurate measurement and characterization of organic solar cells10.1002/adfm.200600489 ↗
6. 4.2% efficient organic photovoltaic cells with low series resistances10.1063/1.1713036 ↗
7. Reduction of collection efficiency of charge carriers with increasing cell size in polymer bulk heterojunction solar cells10.1002/adfm.201001578 ↗
8. Large-area organic solar cells with metal subelectrode on indium tin oxide anode10.1063/1.3419925 ↗
9. Efficiency enhancement in organic photovoltaic cells: consequences of optimizing series resistance10.1002/adfm.200901107 ↗
10. Characterization of organic solar cells: the importance of device layout10.1002/adfm.200700295 ↗
11. Area dependent efficiency of organic solar cells10.1063/1.2998540 ↗
12. Importance of indium tin oxide surface acido basicity for charge injection into organic materials based light emitting diodes10.1063/1.373482 ↗
13. Recent progress in polymer solar cells: manipulation of polymer:fullerene morphology and the formation of efficient inverted polymer solar cells10.1002/adma.200802854 ↗
14. Simulation of light intensity dependent current characteristics of polymer solar cells10.1063/1.1646435 ↗
15. Flexible, long-lived, large-area, organic solar cells10.1016/j.solmat.2006.10.013 ↗
16. Origin of size effect on efficiency of organic photovoltaics10.1063/1.3567930 ↗
17. , Photovoltaic devices with a low band gap polymer and CdSe nanostructures exceeding 3% efficiency10.1021/nl903406s ↗
18. Photovoltaic characterization of concentrator solar cells by localized irradiation10.1063/1.2266161 ↗
19. Role of ITO and PEDOT:PSS in stability/degradation of polymer:fullerene bulk heterojunctions solar cells10.1016/j.solmat.2009.10.026 ↗
20. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
21. Heterogeneity in polymer solar cells: local morphology and performance in organic photovoltaics studied with scanning probe microscopy10.1021/ar900231q ↗
22. Charge-transfer and energy-transfer processes in pi-conjugated oligomers and polymers: a molecular picture10.1021/cr040084k ↗
23. Charge photogeneration inorganic solar cells10.1021/cr900271s ↗